MSSC MAINTENANCE AWARENESS PRACTICE TES
UPDATED ACTUAL QUESTIONS WITH CORRECT
ANSWERS
Question 1.
A burn or pungent odor of oil indicates
ANSWER
excessive temperature
Question 2.
A Chain should be replaced when its length becomes ______longer than the original length.
ANSWER
3 percent
Question 3.
A common sign of a misaligned coupling is _____________.
ANSWER
excessive vibration
Question 4.
A multimeter is a multipurpose devise that can measure
ANSWER
voltage, current, and resistance
Question 5.
A power diagram is used in addition to a ladder diagram to determine_________.
ANSWER
All of these (How the input functions on the machine, The sequence of operations, How the
output functions on the machine)
,Question 6.
A power tool has the ground prong broken off of the plug on the power cord. What should be done?
ANSWER
Remove the power tool from service
Question 7.
A shaft coupling may be out of round if dial indicator shows _____________.
ANSWER
any movement
Question 8.
A sight glass in a reservoir usually indicates the ______ of fluid.
ANSWER
level
Question 9.
A tool should be sharpened
ANSWER
When an unacceptable surface finish is present
Question 10.
A viscos meter is a device used for measuring the viscosity of an oil and is generally _______ accurate.
ANSWER
95%-99%
Question 11.
A well designed workstation places tools and equipment where they can be
ANSWER
, available with minimum stress
Question 12.
A workstation should be designed to minimize motions that can
ANSWER
cause repetitive/ stress injuries
Question 13.
All documentation of preventive maintenance should be kept
ANSWER
in a designated, safe and secure location
Question 14.
An electrical diagram that arranges wires of a circuit into order rows is called a(n) _____________.
ANSWER
ladder diagram
Question 15.
An employee come to work on a rainy day and finds water dripping on tools in their workstation.
What should the employee do first?
ANSWER
report the situation to the supervisor
Question 16.
Because dial indicators are fairly delicate, they should _________ during adjustment of the motor
position.
ANSWER
be removed
Question 17.
UPDATED ACTUAL QUESTIONS WITH CORRECT
ANSWERS
Question 1.
A burn or pungent odor of oil indicates
ANSWER
excessive temperature
Question 2.
A Chain should be replaced when its length becomes ______longer than the original length.
ANSWER
3 percent
Question 3.
A common sign of a misaligned coupling is _____________.
ANSWER
excessive vibration
Question 4.
A multimeter is a multipurpose devise that can measure
ANSWER
voltage, current, and resistance
Question 5.
A power diagram is used in addition to a ladder diagram to determine_________.
ANSWER
All of these (How the input functions on the machine, The sequence of operations, How the
output functions on the machine)
,Question 6.
A power tool has the ground prong broken off of the plug on the power cord. What should be done?
ANSWER
Remove the power tool from service
Question 7.
A shaft coupling may be out of round if dial indicator shows _____________.
ANSWER
any movement
Question 8.
A sight glass in a reservoir usually indicates the ______ of fluid.
ANSWER
level
Question 9.
A tool should be sharpened
ANSWER
When an unacceptable surface finish is present
Question 10.
A viscos meter is a device used for measuring the viscosity of an oil and is generally _______ accurate.
ANSWER
95%-99%
Question 11.
A well designed workstation places tools and equipment where they can be
ANSWER
, available with minimum stress
Question 12.
A workstation should be designed to minimize motions that can
ANSWER
cause repetitive/ stress injuries
Question 13.
All documentation of preventive maintenance should be kept
ANSWER
in a designated, safe and secure location
Question 14.
An electrical diagram that arranges wires of a circuit into order rows is called a(n) _____________.
ANSWER
ladder diagram
Question 15.
An employee come to work on a rainy day and finds water dripping on tools in their workstation.
What should the employee do first?
ANSWER
report the situation to the supervisor
Question 16.
Because dial indicators are fairly delicate, they should _________ during adjustment of the motor
position.
ANSWER
be removed
Question 17.
