MOT EXAM (LTAP) EXPECTED QUESTIONS WITH
VERIFIED ANSWERS
Question 1.
Erect _____________ sign 250' in advance of any section of roadway where traffic must travel on a
planed surface.
ANSWER
Grooved Pavement (CMS 2019, section 614.055)
Question 2.
Furnish cones, drums, signs, sign support, barricades, and other traffic control devices that are
certified to meet _____________.
ANSWER
NCHRP 350 (CMS 2019, Section 614.03)
Question 3.
(T/F) Escort transport vehicles without proper strobe lights, LED warning lights or rotating beacons
or conspicuity tape to and from the work zone only with the approval of the Engineer
ANSWER
True (CMS 2019, section 614.11)
Question 4.
Repair or replace unsatisfactory markings immediately and at no additional cost to the department,
if the marking were in place for __________ days or less.
ANSWER
120 calendar days (CMS 2019, section 614.11)
Question 5.
All barriers segments are to be marked on the top, as shown, PCB-Rxx-350-TL3. What does the xx
stand for?
, ANSWER
it will indicate the year casted
Question 6.
The contractor shall select one of the three acceptable options for terminating portable barriers.
ANSWER
Refer to NOTE ITEMS #3 a), b), and c)
Question 7.
Cones used for night time traffic control shall have a minimum height of ____________?
ANSWER
42" (Drums/Cones, section 13B)
Question 8.
For construction of temporary walkways, the maximum grade shall be _____________ unless specified
otherwise?
ANSWER
5% (MT110.10 (5B))
Question 9.
____________________ shall be used to protect pedestrians from thrown object from passing vehicle?
ANSWER
Plywood Walls ( MT-110.10 (7E))
Question 10.
Temporary sign support requirements, Class B supports shall be used at the following locations
_________________
ANSWER
Within the clear zone where protected by guardrail or concrete barrier or retaining wall/ or
outside the clear zone (MT-105.10, Class B, (a) & (g))
VERIFIED ANSWERS
Question 1.
Erect _____________ sign 250' in advance of any section of roadway where traffic must travel on a
planed surface.
ANSWER
Grooved Pavement (CMS 2019, section 614.055)
Question 2.
Furnish cones, drums, signs, sign support, barricades, and other traffic control devices that are
certified to meet _____________.
ANSWER
NCHRP 350 (CMS 2019, Section 614.03)
Question 3.
(T/F) Escort transport vehicles without proper strobe lights, LED warning lights or rotating beacons
or conspicuity tape to and from the work zone only with the approval of the Engineer
ANSWER
True (CMS 2019, section 614.11)
Question 4.
Repair or replace unsatisfactory markings immediately and at no additional cost to the department,
if the marking were in place for __________ days or less.
ANSWER
120 calendar days (CMS 2019, section 614.11)
Question 5.
All barriers segments are to be marked on the top, as shown, PCB-Rxx-350-TL3. What does the xx
stand for?
, ANSWER
it will indicate the year casted
Question 6.
The contractor shall select one of the three acceptable options for terminating portable barriers.
ANSWER
Refer to NOTE ITEMS #3 a), b), and c)
Question 7.
Cones used for night time traffic control shall have a minimum height of ____________?
ANSWER
42" (Drums/Cones, section 13B)
Question 8.
For construction of temporary walkways, the maximum grade shall be _____________ unless specified
otherwise?
ANSWER
5% (MT110.10 (5B))
Question 9.
____________________ shall be used to protect pedestrians from thrown object from passing vehicle?
ANSWER
Plywood Walls ( MT-110.10 (7E))
Question 10.
Temporary sign support requirements, Class B supports shall be used at the following locations
_________________
ANSWER
Within the clear zone where protected by guardrail or concrete barrier or retaining wall/ or
outside the clear zone (MT-105.10, Class B, (a) & (g))
