FDNY G60 Practice Test Questions And Answers
Rated A+
Section 1: General Hot Work Requirements
Question 1
Sprinkler system must NOT be shut off or impaired while hot work is
performed. What must be done instead?
A. Place damp cloth guards on individual sprinkler heads
B. Place dry cloth guards on individual sprinkler heads
C. Place metal guards on individual sprinkler heads
D. Place plastic guards on individual sprinkler heads
Correct Answer: A. Place damp cloth guards on individual sprinkler heads
Rationale: Sprinkler systems must not be shut off or impaired
during hot work. Instead, damp cloth guards should be placed on
individual sprinkler heads to protect them from activation.
Question 2
The person conducting the fire watch _____ have other duties.
A. CANNOT
B. CAN
C. MAY
D. SHOULD
,Correct Answer: A. CANNOT
Rationale: The person conducting the fire watch cannot have other
duties. Their sole responsibility is to monitor for fire hazards.
Question 3
A portable fire extinguisher with a rating of _____ is required and should
be within _____ feet travel distance of the hot work area.
A. 2-A:20-B:C // 30
B. 2-A:10-B:C // 20
C. 3-A:40-B:C // 30
D. 2-A:20-B:C // 20
Correct Answer: A. 2-A:20-B:C // 30
Rationale: A portable fire extinguisher with a rating of 2-A:20-B:C is
required and should be within 30 feet travel distance of the hot
work area.
Question 4
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum
rating of _____ is required.
A. 3-A:40-B:C
B. 2-A:20-B:C
C. 4-A:60-B:C
D. 2-A:10-B:C
Correct Answer: A. 3-A:40-B:C
Rationale: For roofing operations, a portable fire extinguisher with a
minimum rating of 3-A:40-B:C is required.
,Question 5
Fire watch on floors below is _____.
A. required
B. not required
C. optional
D. recommended
Correct Answer: A. required
Rationale: Fire watch on floors below is required during hot work
operations.
Question 6
The fire watch must continue for a minimum of _____ minutes after the
hot work is done.
A. 30
B. 20
C. 15
D. 60
Correct Answer: A. 30
Rationale: The fire watch must continue for a minimum of 30
minutes after the hot work is done.
Question 7
For any CNG or LPG torch operations, the first inspection shall be
conducted _____ minutes after completion. The second inspection shall be
conducted _____ after completion of torch operations.
A. 30 min // 1 hour
, B. 20 min // 30 min
C. 15 min // 45 min
D. 30 min // 2 hours
Correct Answer: A. 30 min // 1 hour
Rationale: For CNG or LPG torch operations, the first inspection shall
be conducted 30 minutes after completion, and the second
inspection shall be conducted 1 hour after completion.
Question 8
The fire guard or fire watch personnel must complete a signed inspection
report and it must be submitted to and retained by the person in charge
of the torch operations. The report must be made available and
maintained on the premises for a minimum of _____ hours after the work
is complete.
A. 48
B. 24
C. 72
D. 12
Correct Answer: A. 48
Rationale: The report must be made available and maintained on the
premises for a minimum of 48 hours after the work is complete.
Question 9
Most common fuel gases used in blowtorches are _____.
A. LPG (butane, propane) natural gas (methane) (either CNG or piped
natural gasses)
Rated A+
Section 1: General Hot Work Requirements
Question 1
Sprinkler system must NOT be shut off or impaired while hot work is
performed. What must be done instead?
A. Place damp cloth guards on individual sprinkler heads
B. Place dry cloth guards on individual sprinkler heads
C. Place metal guards on individual sprinkler heads
D. Place plastic guards on individual sprinkler heads
Correct Answer: A. Place damp cloth guards on individual sprinkler heads
Rationale: Sprinkler systems must not be shut off or impaired
during hot work. Instead, damp cloth guards should be placed on
individual sprinkler heads to protect them from activation.
Question 2
The person conducting the fire watch _____ have other duties.
A. CANNOT
B. CAN
C. MAY
D. SHOULD
,Correct Answer: A. CANNOT
Rationale: The person conducting the fire watch cannot have other
duties. Their sole responsibility is to monitor for fire hazards.
Question 3
A portable fire extinguisher with a rating of _____ is required and should
be within _____ feet travel distance of the hot work area.
A. 2-A:20-B:C // 30
B. 2-A:10-B:C // 20
C. 3-A:40-B:C // 30
D. 2-A:20-B:C // 20
Correct Answer: A. 2-A:20-B:C // 30
Rationale: A portable fire extinguisher with a rating of 2-A:20-B:C is
required and should be within 30 feet travel distance of the hot
work area.
Question 4
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum
rating of _____ is required.
A. 3-A:40-B:C
B. 2-A:20-B:C
C. 4-A:60-B:C
D. 2-A:10-B:C
Correct Answer: A. 3-A:40-B:C
Rationale: For roofing operations, a portable fire extinguisher with a
minimum rating of 3-A:40-B:C is required.
,Question 5
Fire watch on floors below is _____.
A. required
B. not required
C. optional
D. recommended
Correct Answer: A. required
Rationale: Fire watch on floors below is required during hot work
operations.
Question 6
The fire watch must continue for a minimum of _____ minutes after the
hot work is done.
A. 30
B. 20
C. 15
D. 60
Correct Answer: A. 30
Rationale: The fire watch must continue for a minimum of 30
minutes after the hot work is done.
Question 7
For any CNG or LPG torch operations, the first inspection shall be
conducted _____ minutes after completion. The second inspection shall be
conducted _____ after completion of torch operations.
A. 30 min // 1 hour
, B. 20 min // 30 min
C. 15 min // 45 min
D. 30 min // 2 hours
Correct Answer: A. 30 min // 1 hour
Rationale: For CNG or LPG torch operations, the first inspection shall
be conducted 30 minutes after completion, and the second
inspection shall be conducted 1 hour after completion.
Question 8
The fire guard or fire watch personnel must complete a signed inspection
report and it must be submitted to and retained by the person in charge
of the torch operations. The report must be made available and
maintained on the premises for a minimum of _____ hours after the work
is complete.
A. 48
B. 24
C. 72
D. 12
Correct Answer: A. 48
Rationale: The report must be made available and maintained on the
premises for a minimum of 48 hours after the work is complete.
Question 9
Most common fuel gases used in blowtorches are _____.
A. LPG (butane, propane) natural gas (methane) (either CNG or piped
natural gasses)
