Pump ops Ricky rescue
Question 1.
Loss of braking function, which occurs due to excessive use of brakes
ANSWER
Brake Fade
Question 2.
Permanently installed pipe that has pump suction connections installed at a static water source to speed drafting operations.
ANSWER
Dry Hydrant
Question 3.
Who does the driver /operator notify of any defect and documentation re-garding issues with apparatus?
ANSWER
Immediate Supervisor
Question 4.
The incoming driver should consult who for any pertinent information re-garding incident activity, equipment usage, or problems?
ANSWER
The person being relieved
Question 5.
What is the signal the driver gives to signal the backing of the apparatus?
ANSWER
2 short blasts of vehicles horn
Question 6.
What is the spotters signal to the driver to back straight?
ANSWER
Palms face the spotter using both arms
Question 7.
What is the spotters signal to the driver to back right?
ANSWER
Right arm out to the side with palm of left hand facing the driver
, Question 8.
What is the spotters signal to the driver for backing left?
ANSWER
Left arm out to the side with the palm of right hand facing the driver
Question 9.
What is the spotters signal to the driver for the driver to stop?
ANSWER
Arms for an X
Question 10.
What is the spotters signal to the driver for the driver to pull forward?
ANSWER
Palms face driver with both arms
Question 11.
What are the pros and cons of batch mixing?
ANSWER
Batch mixing is simple but inaccurate
Question 12.
What does induction use?
ANSWER
A venturi device called and eductor
Question 13.
Pails, barrels, totes, and apparatus tanks (smallest to largest)
ANSWER
Different foam storing methods
Question 14.
When load monitor shuts down less important electrical equipment to pre-vent overload
ANSWER
Load shedding
Question 15.
What level sound re-quires hearing pro-tection
ANSWER
90db and higher
Question 1.
Loss of braking function, which occurs due to excessive use of brakes
ANSWER
Brake Fade
Question 2.
Permanently installed pipe that has pump suction connections installed at a static water source to speed drafting operations.
ANSWER
Dry Hydrant
Question 3.
Who does the driver /operator notify of any defect and documentation re-garding issues with apparatus?
ANSWER
Immediate Supervisor
Question 4.
The incoming driver should consult who for any pertinent information re-garding incident activity, equipment usage, or problems?
ANSWER
The person being relieved
Question 5.
What is the signal the driver gives to signal the backing of the apparatus?
ANSWER
2 short blasts of vehicles horn
Question 6.
What is the spotters signal to the driver to back straight?
ANSWER
Palms face the spotter using both arms
Question 7.
What is the spotters signal to the driver to back right?
ANSWER
Right arm out to the side with palm of left hand facing the driver
, Question 8.
What is the spotters signal to the driver for backing left?
ANSWER
Left arm out to the side with the palm of right hand facing the driver
Question 9.
What is the spotters signal to the driver for the driver to stop?
ANSWER
Arms for an X
Question 10.
What is the spotters signal to the driver for the driver to pull forward?
ANSWER
Palms face driver with both arms
Question 11.
What are the pros and cons of batch mixing?
ANSWER
Batch mixing is simple but inaccurate
Question 12.
What does induction use?
ANSWER
A venturi device called and eductor
Question 13.
Pails, barrels, totes, and apparatus tanks (smallest to largest)
ANSWER
Different foam storing methods
Question 14.
When load monitor shuts down less important electrical equipment to pre-vent overload
ANSWER
Load shedding
Question 15.
What level sound re-quires hearing pro-tection
ANSWER
90db and higher
