Practice Questions & Answers 2026-2027
This specialized technical study guide provides comprehensive practice questions and
verified answers tailored specifically to the Virginia Landscape Service Contractor (LSC)
specialty classification exam. It delivers explicit coverage of the Virginia Board for
Contractors regulations, the Department of Professional and Occupational Regulation
(DPOR) statutes, soil excavation safety, and regional erosion control standards.
Licensing candidates will master critical project estimation calculations, grading
formulas, commercial drainage layouts, and environmental protection guidelines to pass
their proctored trade assessment on the first attempt.
1. Under Virginia law, what is the maximum project value for a Class C landscaping
service contractor license?
A) $5,000
B) ***$10,000***
C) $25,000
D) $50,000
Rationale: A Virginia Class C license allows individual projects valued up to $10,000, with
a total annual cap of $150,000.
2. What is the annual total project limit for a Virginia Class B landscaping service
contractor license?
A) $150,000
B) $500,000
C) ***$750,000***
D) $1,000,000
Rationale: A Class B license has an annual cap of $750,000 in total contracts.
3. Which Virginia agency enforces the Chesapeake Bay Preservation Act
regulations for landscaping activities?
,A) Virginia Department of Agriculture
B) Virginia Department of Environmental Quality (DEQ)
C) Virginia Department of Transportation
D) Virginia Department of Forestry
Rationale: The Virginia DEQ enforces the Chesapeake Bay Preservation Act, including
regulations affecting landscaping in Resource Protection Areas.
4. What is the required width of a vegetated buffer along a waterway in a
Resource Protection Area in Virginia?
A) 25 feet
B) 50 feet
C) 100 feet
D) 200 feet
Rationale: The Chesapeake Bay Preservation Act requires a 100-foot vegetated buffer
along waterways in Resource Protection Areas.
5. Which Virginia regulation requires erosion and sediment control plans for land-
disturbing activities?
A) Clean Water Act
B) Virginia Erosion and Sediment Control Law
C) Virginia Pesticide Control Act
D) Virginia Fertilizer Law
Rationale: The Virginia Erosion and Sediment Control Law requires approved plans for
land-disturbing activities to prevent sedimentation.
6. What is the minimum land disturbance area that triggers the need for an
erosion and sediment control plan in Virginia?
A) 1,000 square feet
B) 2,500 square feet
,C) 5,000 square feet
D) 10,000 square feet
Rationale: In Virginia, land-disturbing activities of 2,500 square feet or more require an
approved erosion and sediment control plan.
7. Which type of Virginia soil is most prone to erosion and requires special
stabilization measures?
A) Sandy loam
B) Silt loam
C) Clay
D) Gravel
Rationale: Silt loam soils are highly erodible and require special stabilization measures
such as mulch or erosion control blankets.
8. What is the recommended BMP for stabilizing a construction entrance in
Virginia?
A) Paved driveway
B) Crushed stone pad
C) Gravel and sand mix
D) Concrete washout
Rationale: A crushed stone pad (construction entrance) is a common best management
practice to prevent tracking mud onto roads.
9. Which Virginia native tree is recommended for rain gardens due to its tolerance
of wet soils?
A) Acer rubrum
B) Betula nigra (River Birch)
C) Quercus alba
D) Cornus florida
, Rationale: River Birch is native to Virginia and tolerates wet soils, making it suitable for
rain gardens.
10. What is the recommended method for testing soil infiltration rate in Virginia?
A) Visual inspection
B) Percolation test
C) Soil pH test
D) Soil texture test
Rationale: A percolation test measures how quickly water drains through soil, determining
suitability for rain gardens and infiltration practices.
11. Which of the following is a Virginia native grass used for erosion control on
slopes?
A) Pampas grass
B) Panicum virgatum (Switchgrass)
C) Fountain grass
D) Zebra grass
Rationale: Switchgrass is native to Virginia and has deep roots that help stabilize slopes
and control erosion.
12. What is the recommended seeding rate for tall fescue in Virginia?
A) 2–3 lbs per 1,000 sq ft
B) 6–8 lbs per 1,000 sq ft
C) 10–12 lbs per 1,000 sq ft
D) 4–5 lbs per 1,000 sq ft
Rationale: Tall fescue should be seeded at 6–8 lbs per 1,000 sq ft in Virginia.