IFSTA - CHAPTER 12: FIRE HOSE EXAM
QUESTIONS WITH VERIFIED ANSWERS
2026/2027
1. Which NFPA standard provides the requirements for the care, use, inspection, service
testing, and replacement of fire hose?
A. NFPA 1001
B. NFPA 1500
C. NFPA 1962
D. NFPA 1901
Answer: C
Conceptual Explanation: NFPA 1962 is the Standard for the Care, Use, Inspection, Service
Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances.
2. Which type of hose construction features a rubber-like lining and a single or double outer
layer of fabric?
A. Woven-jacket hose
B. Hard-suction hose
,C. Impregnated single-jacket hose
D. Noncollapsible intake hose
Answer: A
Conceptual Explanation: Woven-jacket hose is constructed with one or two outer layers
(jackets) of cotton or synthetic fabric over a rubber-like interior lining.
3. What is the primary purpose of the ‘Higbee cut’ on threaded couplings?
A. To provide a grip for spanner wrenches
B. To seal the connection against water leaks
C. To prevent cross-threading by indicating the start of the threads
D. To allow for the connection of non-threaded couplings
Answer: C
Conceptual Explanation: The Higbee cut is a flattened thread at the beginning of the
thread sequence that prevents cross-threading and indicates where the threads begin.
4. Which type of lug is most commonly found on modern fire hose couplings and is designed
to prevent snagging?
A. Rocker lugs
B. Pin lugs
C. Recessed lugs
, D. Handle lugs
Answer: A
Conceptual Explanation: Rocker lugs have rounded edges that allow the hose to slide over
obstacles without snagging, unlike older pin lugs.
5. Which type of hose damage is caused by exposure to extreme heat or contact with fire?
A. Mechanical damage
B. Thermal damage
C. Organic damage
D. Chemical damage
Answer: B
Conceptual Explanation: Thermal damage results from high temperatures, which can
char or melt the hose jacket or lining.
6. How often should fire hose be inspected according to NFPA 1962?
A. Every six months
B. After each use and at least annually
C. Only during the annual service test
D. Once every two years
Answer: B
QUESTIONS WITH VERIFIED ANSWERS
2026/2027
1. Which NFPA standard provides the requirements for the care, use, inspection, service
testing, and replacement of fire hose?
A. NFPA 1001
B. NFPA 1500
C. NFPA 1962
D. NFPA 1901
Answer: C
Conceptual Explanation: NFPA 1962 is the Standard for the Care, Use, Inspection, Service
Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances.
2. Which type of hose construction features a rubber-like lining and a single or double outer
layer of fabric?
A. Woven-jacket hose
B. Hard-suction hose
,C. Impregnated single-jacket hose
D. Noncollapsible intake hose
Answer: A
Conceptual Explanation: Woven-jacket hose is constructed with one or two outer layers
(jackets) of cotton or synthetic fabric over a rubber-like interior lining.
3. What is the primary purpose of the ‘Higbee cut’ on threaded couplings?
A. To provide a grip for spanner wrenches
B. To seal the connection against water leaks
C. To prevent cross-threading by indicating the start of the threads
D. To allow for the connection of non-threaded couplings
Answer: C
Conceptual Explanation: The Higbee cut is a flattened thread at the beginning of the
thread sequence that prevents cross-threading and indicates where the threads begin.
4. Which type of lug is most commonly found on modern fire hose couplings and is designed
to prevent snagging?
A. Rocker lugs
B. Pin lugs
C. Recessed lugs
, D. Handle lugs
Answer: A
Conceptual Explanation: Rocker lugs have rounded edges that allow the hose to slide over
obstacles without snagging, unlike older pin lugs.
5. Which type of hose damage is caused by exposure to extreme heat or contact with fire?
A. Mechanical damage
B. Thermal damage
C. Organic damage
D. Chemical damage
Answer: B
Conceptual Explanation: Thermal damage results from high temperatures, which can
char or melt the hose jacket or lining.
6. How often should fire hose be inspected according to NFPA 1962?
A. Every six months
B. After each use and at least annually
C. Only during the annual service test
D. Once every two years
Answer: B
