MAKO
Comprehensive Resource To Help You Ace Exams Includes
Frequently Tested Questions With ELABORATED 100%
Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. During bone registration, the pattern for medial uni is identical to the
pattern for a medial bicomp - CORRECT ANSWER False (anterior
points to map for PF)
2. After bone registration is completed, placing the green probe into the
checkpoint will provide live checkpoint result - CORRECT ANSWER
True
3. There is a planar probe option to check the depth of resection for
Mako PKA 3.0 - CORRECT ANSWER False
4. The mics is a high torque cutting tool - CORRECT ANSWER True
5. When Burr only workflow is selected, the robotic arm can only be
positioned on the non-operative side - CORRECT ANSWER False
6. When attaching the irrigation clip, how do you instruct the scrub tech
to orient the irrigation clip? - CORRECT ANSWER Arrow pointing
towards the burr tip
7. What attachments are used for Mako PKA 3.0 planar workflow -
CORRECT ANSWER Rotary attachment, sagittal saw attachment
8. When Burr only workflow is selected, the robot can be placed on the
operative or non-operative side - CORRECT ANSWER True
9. If the long guard and rotary attachment are assembled properly, laser
markings, or black lines on each will match - CORRECT ANSWER
True
,10. When Burr only workflow is selected, the robotic arm can only
be positioned on the operative side - CORRECT ANSWER False
11. In Mako PKA 3.0 Rio registration is performed with the burr tool
and the end effector array - CORRECT ANSWER False
12. During gap balancing the surgeon wishes to tighten flexion
poses what is a possible solution (translation) - CORRECT ANSWER
Translate femur posteriorly
13. What does FFC stand for? - CORRECT ANSWER Flexion facet
center
14. Based on the image below, gap balancing, how can you
determine which pose is selected? - CORRECT ANSWER White bar
15. During implant tracking, what do yellow dots represent? -
CORRECT ANSWER The most anterior part of the tibia in full
extension and most posterior part of the tibia in full flexion
16. What are the recommended intro op gap planning parameters
for Mako partial knee? - CORRECT ANSWER 0-1.5 mm loose
17. During gap, balancing the surgeon wishes to loosen flexion
poses what is a possible solution (rotation) - CORRECT ANSWER
Anchor anteriorly, add flexion
18. During implant tracking yellow dots are used to assess bone
impingement - CORRECT ANSWER True
19. During gap balancing the surgeon wishes to loosen extension
poses what is a possible solution - CORRECT ANSWER Anchor
posteriorly and add extension
20. During implant tracking, what do red dots represent? -
CORRECT ANSWER The center of the tibia at each posed capture
21. During gap, balancing the surgeon wishes to loosen extension
poses what is a possible solution - CORRECT ANSWER Proximalize
femur
, 22. During implant tracking yellow dots are used to assess over
stuffing of the PF joint - CORRECT ANSWER False
23. During got balancing the surgeon wishes to tighten extension
poses what is a possible solution - CORRECT ANSWER Anchor
posteriorly and add flexion
24. During gap, balancing the surgeon wishes to loosen flexion
poses what is a possible solution (translation) - CORRECT ANSWER
Move femur anterior
25. Why do we capture all four poses? - CORRECT ANSWER We
don't have a single radius on PKA restoris implants so we need four
captures between 30 and 105
26. What resections are performed with saw attachment for planar
workflow? - CORRECT ANSWER Tibia floor and posterior femur
27. When changing cutting attachments, but remaining on the
same bone, the system requires you to check both bone checkpoint,
and cutter checkpoint - CORRECT ANSWER False
28. When changing the bone surface, but keeping the same
resection tool, the system requires you to only check the bone
checkpoint prior to entering bone prep - CORRECT ANSWER True
29. What sections apply to tibia bone prep in planar workflow? -
CORRECT ANSWER Tibia floor, tibia wall, tibia anterior post, tibia
posterior post
30. What bone resections applied to femoral bone prep in planar
workflow? - CORRECT ANSWER Femur posterior, femur distal
surface, keel, femur anterior post femur posterior post
31. What bone resections applied to tibia bone prep in burr only
workflow - CORRECT ANSWER Tibia surface, tibia posts
Comprehensive Resource To Help You Ace Exams Includes
Frequently Tested Questions With ELABORATED 100%
Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. During bone registration, the pattern for medial uni is identical to the
pattern for a medial bicomp - CORRECT ANSWER False (anterior
points to map for PF)
2. After bone registration is completed, placing the green probe into the
checkpoint will provide live checkpoint result - CORRECT ANSWER
True
3. There is a planar probe option to check the depth of resection for
Mako PKA 3.0 - CORRECT ANSWER False
4. The mics is a high torque cutting tool - CORRECT ANSWER True
5. When Burr only workflow is selected, the robotic arm can only be
positioned on the non-operative side - CORRECT ANSWER False
6. When attaching the irrigation clip, how do you instruct the scrub tech
to orient the irrigation clip? - CORRECT ANSWER Arrow pointing
towards the burr tip
7. What attachments are used for Mako PKA 3.0 planar workflow -
CORRECT ANSWER Rotary attachment, sagittal saw attachment
8. When Burr only workflow is selected, the robot can be placed on the
operative or non-operative side - CORRECT ANSWER True
9. If the long guard and rotary attachment are assembled properly, laser
markings, or black lines on each will match - CORRECT ANSWER
True
,10. When Burr only workflow is selected, the robotic arm can only
be positioned on the operative side - CORRECT ANSWER False
11. In Mako PKA 3.0 Rio registration is performed with the burr tool
and the end effector array - CORRECT ANSWER False
12. During gap balancing the surgeon wishes to tighten flexion
poses what is a possible solution (translation) - CORRECT ANSWER
Translate femur posteriorly
13. What does FFC stand for? - CORRECT ANSWER Flexion facet
center
14. Based on the image below, gap balancing, how can you
determine which pose is selected? - CORRECT ANSWER White bar
15. During implant tracking, what do yellow dots represent? -
CORRECT ANSWER The most anterior part of the tibia in full
extension and most posterior part of the tibia in full flexion
16. What are the recommended intro op gap planning parameters
for Mako partial knee? - CORRECT ANSWER 0-1.5 mm loose
17. During gap, balancing the surgeon wishes to loosen flexion
poses what is a possible solution (rotation) - CORRECT ANSWER
Anchor anteriorly, add flexion
18. During implant tracking yellow dots are used to assess bone
impingement - CORRECT ANSWER True
19. During gap balancing the surgeon wishes to loosen extension
poses what is a possible solution - CORRECT ANSWER Anchor
posteriorly and add extension
20. During implant tracking, what do red dots represent? -
CORRECT ANSWER The center of the tibia at each posed capture
21. During gap, balancing the surgeon wishes to loosen extension
poses what is a possible solution - CORRECT ANSWER Proximalize
femur
, 22. During implant tracking yellow dots are used to assess over
stuffing of the PF joint - CORRECT ANSWER False
23. During got balancing the surgeon wishes to tighten extension
poses what is a possible solution - CORRECT ANSWER Anchor
posteriorly and add flexion
24. During gap, balancing the surgeon wishes to loosen flexion
poses what is a possible solution (translation) - CORRECT ANSWER
Move femur anterior
25. Why do we capture all four poses? - CORRECT ANSWER We
don't have a single radius on PKA restoris implants so we need four
captures between 30 and 105
26. What resections are performed with saw attachment for planar
workflow? - CORRECT ANSWER Tibia floor and posterior femur
27. When changing cutting attachments, but remaining on the
same bone, the system requires you to check both bone checkpoint,
and cutter checkpoint - CORRECT ANSWER False
28. When changing the bone surface, but keeping the same
resection tool, the system requires you to only check the bone
checkpoint prior to entering bone prep - CORRECT ANSWER True
29. What sections apply to tibia bone prep in planar workflow? -
CORRECT ANSWER Tibia floor, tibia wall, tibia anterior post, tibia
posterior post
30. What bone resections applied to femoral bone prep in planar
workflow? - CORRECT ANSWER Femur posterior, femur distal
surface, keel, femur anterior post femur posterior post
31. What bone resections applied to tibia bone prep in burr only
workflow - CORRECT ANSWER Tibia surface, tibia posts
