Ultrasound Physics - Mock Exam
Questions for SPI latest updates!!!
2026-2027 | correct solutions with
quiz & answers | verified | highly
graded a+
Which of the following transducers will have the worst axial resolution?
a. Vector array, 3 MHz
b. Linear Sequential Array, 6 MHZ
c. Linear Phased Array 7.5 MHZ
d. Annular Array, 6 MHz - CORRECT ANSWERS-Vector array, 3 MHz
A sound wave is traveling in the body and propagates from muscle to air. What
percentage of the sound wave is most likely reflected at the muscle-air boundary?
a. 0.5%
b. 75%
c. 25%
d. 5%
e. 99% - CORRECT ANSWERS-75%
Which of the following lists is in decreasing order?
a. mega, kilo, deca, milli, nano
b. centi, mill, kilo, mega, nano
c. micro, milli, deci, kilo, mega
d. micro, kilo, mega, deci, milli
e. mega, micro, deci, milli, hecto - CORRECT ANSWERS-mega, kilo, deca, milk, nano
During a diagnostic exam, which of these statements is most correct when describing
the pulsed echo characteristics of an ultrasound system.
a. The listening time may be one-thousand times longer than the pulse duration.
b. the pulse duration is longer than the pulse repetition period.
c. The pulse duration is similar to the listening time.
d. The duty factor has a value close to 1
e. The pulse repitition period is similar to the period. - CORRECT ANSWERS-The
listening time may be one-thousand times longer than the pulse duration.
,Which of the following parameters is determined by both the ultrasound system and the
medium through which the sound travels?
a. period
b. frequency
c. temperature
d. wavelength
e. velocity of the sound - CORRECT ANSWERS-wavelength
You should be familiar with the formula L= C/F.
What does "C" stand for in this equation?
a. characteristic impedence
b. density
c. compliance
d. compressability
e. propagation speed - CORRECT ANSWERS-propagation speed
Which of the following lists is in increasing order?
a. mega, kilo, milli, nano, centi
b. centi, milli, kilo, mega, nano
c. micro, kilo, milli, deci, mega
d. micro, milli, deci, kilo, mega
e. mega, micro, deci, mill, hecto - CORRECT ANSWERS-micro, milli, deci, kilo, mega
Which of the following statements about speed and attenuation are true?
a. Attenuation through and propagation speed in a particular medium are unrelated to
each other.
b. When a sound beam travels faster in a medium, the attenuation is less.
c. When a sound beam travels slower in a medium, the attenuation is more. -
CORRECT ANSWERS-Attenuation through and propagation speed in a particular
medium are unrelated to each other.
A sonographer is scanning a patient with a 3 MHz probe and replaces it with a 6 MHz
probe. All of the following statements are FALSE, except:
a. The 6 MHz beam will travel at a lower speed than the 3 MHz beam
b. The 6 MHz beam will travel faster than the 3 MHz beam
c. The 3 MHz beam will have a higher frequency than the 6 MHz beam
d. The 6 MHZ beam will have a longer period than the 3 MHz beam
e. The 3 MHz beam will have a longer wavelength than the 6 MHz beam - CORRECT
ANSWERS-The 3 MHz beam will have a longer wavelength than the 6 MHz beam
Rank the following media in increasing order of propagation speed.
a. muscle, liver, fat, bone, lung
b. air, lung, fat, soft tissue, bone
c. bone, muscle, fat, lung, air
d. air, fat, bone, blood, water
, e. liver, kidney, fat, muscle, brain - CORRECT ANSWERS-air, lung, fat, soft tissue,
bone
Which of the following intensities is most significant with regard to the study of
bioeffects?
a. SATP
b. SATA
c. SAPA
d. SPTA
e. SPTP - CORRECT ANSWERS-SPTA
Which of the following terms does not belong with the others?
a. decreased depth of view
b. increased pulse duration
c. increased pulse repitition frequency
d. decreased pulse repitition period
e. high duty factor - CORRECT ANSWERS-increased pulse duration
What is a cyclical region of low density called?
a. compression
b. Pascal
c. rarefaction
d. density
e. impedence - CORRECT ANSWERS-rarefaction
A sonographer adjusts the outout of an ultrasound system by increasing the amplitude
by a factor of three. Which of the following statements is true?
a. power is increased by a factor of three
b. wavelength is increased by a factor of nine
c. power is increased by a factor of nine
d. frequency in increased by a factor of three
e. period is decreased by a factor of three - CORRECT ANSWERS-power is increased
by a factor of nine
Sound travels at the same velocity in two different media. The density of Medium A is
half that of Medium B. Which of the following statements is true:
a. The impedence of Medium A is four times that of Medium B
b. The Reynold's number of Medium A is twice that of Medium B
c. The impedence of Medium A is twice that of Medium B
d. The resistive index of Medium A is twice that of Medium B
e. The impedence of Medium A is half that of Medium B - CORRECT ANSWERS-The
impedance of Medium A is half that of Medium B
Which of the following mechanisms are not related to attenuation?
a. reflection
b. scattering
Questions for SPI latest updates!!!
2026-2027 | correct solutions with
quiz & answers | verified | highly
graded a+
Which of the following transducers will have the worst axial resolution?
a. Vector array, 3 MHz
b. Linear Sequential Array, 6 MHZ
c. Linear Phased Array 7.5 MHZ
d. Annular Array, 6 MHz - CORRECT ANSWERS-Vector array, 3 MHz
A sound wave is traveling in the body and propagates from muscle to air. What
percentage of the sound wave is most likely reflected at the muscle-air boundary?
a. 0.5%
b. 75%
c. 25%
d. 5%
e. 99% - CORRECT ANSWERS-75%
Which of the following lists is in decreasing order?
a. mega, kilo, deca, milli, nano
b. centi, mill, kilo, mega, nano
c. micro, milli, deci, kilo, mega
d. micro, kilo, mega, deci, milli
e. mega, micro, deci, milli, hecto - CORRECT ANSWERS-mega, kilo, deca, milk, nano
During a diagnostic exam, which of these statements is most correct when describing
the pulsed echo characteristics of an ultrasound system.
a. The listening time may be one-thousand times longer than the pulse duration.
b. the pulse duration is longer than the pulse repetition period.
c. The pulse duration is similar to the listening time.
d. The duty factor has a value close to 1
e. The pulse repitition period is similar to the period. - CORRECT ANSWERS-The
listening time may be one-thousand times longer than the pulse duration.
,Which of the following parameters is determined by both the ultrasound system and the
medium through which the sound travels?
a. period
b. frequency
c. temperature
d. wavelength
e. velocity of the sound - CORRECT ANSWERS-wavelength
You should be familiar with the formula L= C/F.
What does "C" stand for in this equation?
a. characteristic impedence
b. density
c. compliance
d. compressability
e. propagation speed - CORRECT ANSWERS-propagation speed
Which of the following lists is in increasing order?
a. mega, kilo, milli, nano, centi
b. centi, milli, kilo, mega, nano
c. micro, kilo, milli, deci, mega
d. micro, milli, deci, kilo, mega
e. mega, micro, deci, mill, hecto - CORRECT ANSWERS-micro, milli, deci, kilo, mega
Which of the following statements about speed and attenuation are true?
a. Attenuation through and propagation speed in a particular medium are unrelated to
each other.
b. When a sound beam travels faster in a medium, the attenuation is less.
c. When a sound beam travels slower in a medium, the attenuation is more. -
CORRECT ANSWERS-Attenuation through and propagation speed in a particular
medium are unrelated to each other.
A sonographer is scanning a patient with a 3 MHz probe and replaces it with a 6 MHz
probe. All of the following statements are FALSE, except:
a. The 6 MHz beam will travel at a lower speed than the 3 MHz beam
b. The 6 MHz beam will travel faster than the 3 MHz beam
c. The 3 MHz beam will have a higher frequency than the 6 MHz beam
d. The 6 MHZ beam will have a longer period than the 3 MHz beam
e. The 3 MHz beam will have a longer wavelength than the 6 MHz beam - CORRECT
ANSWERS-The 3 MHz beam will have a longer wavelength than the 6 MHz beam
Rank the following media in increasing order of propagation speed.
a. muscle, liver, fat, bone, lung
b. air, lung, fat, soft tissue, bone
c. bone, muscle, fat, lung, air
d. air, fat, bone, blood, water
, e. liver, kidney, fat, muscle, brain - CORRECT ANSWERS-air, lung, fat, soft tissue,
bone
Which of the following intensities is most significant with regard to the study of
bioeffects?
a. SATP
b. SATA
c. SAPA
d. SPTA
e. SPTP - CORRECT ANSWERS-SPTA
Which of the following terms does not belong with the others?
a. decreased depth of view
b. increased pulse duration
c. increased pulse repitition frequency
d. decreased pulse repitition period
e. high duty factor - CORRECT ANSWERS-increased pulse duration
What is a cyclical region of low density called?
a. compression
b. Pascal
c. rarefaction
d. density
e. impedence - CORRECT ANSWERS-rarefaction
A sonographer adjusts the outout of an ultrasound system by increasing the amplitude
by a factor of three. Which of the following statements is true?
a. power is increased by a factor of three
b. wavelength is increased by a factor of nine
c. power is increased by a factor of nine
d. frequency in increased by a factor of three
e. period is decreased by a factor of three - CORRECT ANSWERS-power is increased
by a factor of nine
Sound travels at the same velocity in two different media. The density of Medium A is
half that of Medium B. Which of the following statements is true:
a. The impedence of Medium A is four times that of Medium B
b. The Reynold's number of Medium A is twice that of Medium B
c. The impedence of Medium A is twice that of Medium B
d. The resistive index of Medium A is twice that of Medium B
e. The impedence of Medium A is half that of Medium B - CORRECT ANSWERS-The
impedance of Medium A is half that of Medium B
Which of the following mechanisms are not related to attenuation?
a. reflection
b. scattering
