Nevada C-3 Carpentry Contractor Exam
– Complete 200+ Question Test Bank
Verified Answers & Detailed Rationales
2026/2027 Edition
EXAM OVERVIEW
This comprehensive guide provides 200+ practice
questions covering all topics for the Nevada C-3
Carpentry Contractor licensing exam, aligned with
the latest 2026 Nevada State Contractors Board
(NSCB) standards.
License Classification: C-3 (Carpentry, Maintenance
& Minor Repairs) with five subclassifications:
- C-3a: Carpentry and Repairs (rough framing, form
work, siding, roof decking, cabinets)
- C-3b: Finish Carpentry (cabinets, trim, baseboards,
countertops, wood flooring, millwork)
1
,- C-3c: Insulation and Weather Stripping
- C-3d: Overhead Doors (guides, tracks,
counterweights, controls, equipment)
- C-3e: Drywall (installation, taping, finishing, metal
stud framing for non-structural partitions)
Experience Requirement: Minimum 4 years of
journey-level experience within the past 10 years
Two Exams Required:
- Contractor Management Survey (Business & Law):
60 questions, 2 hours, passing score 75%
- C-3 Trade Exam: 56 questions, 2 hours, passing
score approximately 70%
Open Book: Both exams are open-book
2
,Primary Reference Materials: 2018 International
Building Code (IBC), 29 CFR OSHA 1926,
Carpentry & Building Construction, Gypsum
Construction Handbook, BCSI Guide, Finish
Carpenter's Manual
SECTION 1: LICENSING, REGULATIONS &
BUSINESS LAW (Questions 1–55)
Question 1
Which agency is primarily responsible for licensing
and regulating contractors in Nevada?
A) Nevada Department of Business and Industry
B) Nevada State Contractors Board (NSCB)
3
, C) Nevada Department of Labor
D) Nevada Building Commission
Answer: B
Rationale: The Nevada State Contractors Board
(NSCB) oversees licensing, regulation, and
discipline of contractors in Nevada, ensuring
compliance with state laws and regulations.
Question 2
What is the primary scope of work for a C-3 license
classification in Nevada?
A) Plumbing and piping
4
– Complete 200+ Question Test Bank
Verified Answers & Detailed Rationales
2026/2027 Edition
EXAM OVERVIEW
This comprehensive guide provides 200+ practice
questions covering all topics for the Nevada C-3
Carpentry Contractor licensing exam, aligned with
the latest 2026 Nevada State Contractors Board
(NSCB) standards.
License Classification: C-3 (Carpentry, Maintenance
& Minor Repairs) with five subclassifications:
- C-3a: Carpentry and Repairs (rough framing, form
work, siding, roof decking, cabinets)
- C-3b: Finish Carpentry (cabinets, trim, baseboards,
countertops, wood flooring, millwork)
1
,- C-3c: Insulation and Weather Stripping
- C-3d: Overhead Doors (guides, tracks,
counterweights, controls, equipment)
- C-3e: Drywall (installation, taping, finishing, metal
stud framing for non-structural partitions)
Experience Requirement: Minimum 4 years of
journey-level experience within the past 10 years
Two Exams Required:
- Contractor Management Survey (Business & Law):
60 questions, 2 hours, passing score 75%
- C-3 Trade Exam: 56 questions, 2 hours, passing
score approximately 70%
Open Book: Both exams are open-book
2
,Primary Reference Materials: 2018 International
Building Code (IBC), 29 CFR OSHA 1926,
Carpentry & Building Construction, Gypsum
Construction Handbook, BCSI Guide, Finish
Carpenter's Manual
SECTION 1: LICENSING, REGULATIONS &
BUSINESS LAW (Questions 1–55)
Question 1
Which agency is primarily responsible for licensing
and regulating contractors in Nevada?
A) Nevada Department of Business and Industry
B) Nevada State Contractors Board (NSCB)
3
, C) Nevada Department of Labor
D) Nevada Building Commission
Answer: B
Rationale: The Nevada State Contractors Board
(NSCB) oversees licensing, regulation, and
discipline of contractors in Nevada, ensuring
compliance with state laws and regulations.
Question 2
What is the primary scope of work for a C-3 license
classification in Nevada?
A) Plumbing and piping
4
