STATE FARM ESTIMATICS ACTUAL QUESTIONS
WITH VERIFIED SOLUTIONS
◉ Which of the following components is not a part of a roof truss?
Select the single best answer:
A. Top Chord
B. Bottom Chord
C. Web
D. Bird's Mouth
E. Gussets.
Answer: Birds Mouth
◉ Spaced (open) sheathing is normally used with composition
shingles.
TrueFalse.
Answer:
◉ Composition shingles can be purchased in bundles which could be
⅓ square or ¼ square.
TrueFalse.
Answer: True
, ◉ Blanket insulation is an uncut roll of insulation cut to length at the
job site. It is used in walls and attics, and may or may not have a
backing material.
TrueFalse.
Answer: True
◉ Select the false statement.
Select the single best answer:
A. Composition shingle weights range from 120 lb. to 480 lb. per
square.
B. Composition shingles are made of fiberglass or asphalt saturated
roofing material embedded with mineral granules.
C. Wood roofing is generally divided into two categories, wood
shingles and wood shakes.
D. Rigid roofing materials include clay, concrete, metal, and slate.
E. All of the above are true..
Answer: Composition shingle weights range from 120 lb. to 480 lb.
per square.
◉ Non-masonry siding products such as wood, aluminum, vinyl,
steel, and vinyl clad siding are usually measured by the square foot,
but the materials are typically sold by the square (100 SF) or by the
piece.
WITH VERIFIED SOLUTIONS
◉ Which of the following components is not a part of a roof truss?
Select the single best answer:
A. Top Chord
B. Bottom Chord
C. Web
D. Bird's Mouth
E. Gussets.
Answer: Birds Mouth
◉ Spaced (open) sheathing is normally used with composition
shingles.
TrueFalse.
Answer:
◉ Composition shingles can be purchased in bundles which could be
⅓ square or ¼ square.
TrueFalse.
Answer: True
, ◉ Blanket insulation is an uncut roll of insulation cut to length at the
job site. It is used in walls and attics, and may or may not have a
backing material.
TrueFalse.
Answer: True
◉ Select the false statement.
Select the single best answer:
A. Composition shingle weights range from 120 lb. to 480 lb. per
square.
B. Composition shingles are made of fiberglass or asphalt saturated
roofing material embedded with mineral granules.
C. Wood roofing is generally divided into two categories, wood
shingles and wood shakes.
D. Rigid roofing materials include clay, concrete, metal, and slate.
E. All of the above are true..
Answer: Composition shingle weights range from 120 lb. to 480 lb.
per square.
◉ Non-masonry siding products such as wood, aluminum, vinyl,
steel, and vinyl clad siding are usually measured by the square foot,
but the materials are typically sold by the square (100 SF) or by the
piece.