NCCER Core Module 1 Exam Questions and Answers 100% Correct Graded A+ 2026/27
Companies with strong safety cultures usually have lower? - Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of -
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step
for
potential hazards is called a _____. - Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as
_____. - Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls
is to _____. - Cover and mark it
The D-ring or support point on a safety harness should be placed _____. - Between the
shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. - Competent person
Lanyards that have no shock-absorbing features are used for _____. - Positioning
Companies with strong safety cultures usually have lower? - Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of -
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step
for
potential hazards is called a _____. - Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as
_____. - Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls
is to _____. - Cover and mark it
The D-ring or support point on a safety harness should be placed _____. - Between the
shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. - Competent person
Lanyards that have no shock-absorbing features are used for _____. - Positioning
