M-100 The Essentials of Community Association Management Exam Questions and
Verified Answers 2026/27 Graded A+
Army Force Generation - -One of three military force operations
-Directs the development of Army capabilities
-Designed to efficiently generate Army Forces
over time
-Provides ready and responsive forces to the
Joint Force Commander
ReARMM- Principles and priorities - Predictability, Stability, and Synchronization
ReARMM - designed to optimize our ability to modernize and train the Total Army to
meet SECDEF directed mission requirements while maintaining our commitment to Soldiers
Allow the Army to prioritize People and Deliberate Modernization
Allows the Force to see two years in detail, three years in concept
A disciplined life cycle approach enables the Army to minimize OPTEMPO and PERSTEMPO
turbulence
ReARMM - primary phases of Unit Life Cycle Model - Modernize
,Train
Mission
Assigned Modernization (AMOD) Level One - Unit equipped with the most recent and
capable variant available
Assigned Modernization (AMOD) Level Two - Unit equipped with the next most recent
and capable variant containing some advanced capabilities to ensure interoperability
Assigned Modernization (AMOD) Level Three - Unit equipped with fully capable
equipment to meet ReARMM mission line requirements containing some advanced capabilities
to ensure interoperability.
ReARMM - Unit Life Cycles - 8 month cycles
ReARMM requirement - organizational leaders need to have have a deep understanding of
the importance of four measured areas of the
Commander's Unit Status Report (CUSR)
‒ Personnel (P-Rating)
‒ Equipment on Hand (S-Rating)
‒ Equipment Readiness (R-Rating)
‒ Training Readiness (T-Rating)
,C-Level Rating (lower is better) - Overall Readiness Assessment
Personnel (P-Level) - measures personnel readiness using three metrics for personnel fill
percentages that are based on required strength established in the unit's formal requirements and
authorizations document (MTOE or TDA)
‒ Available Personnel Strength
‒ Available MOS Strength by Duty Position
‒ Available Senior Grade Strength
Equipment on Hand (S-level) - is calculated by separately comparing the approved
authorizations document (MTOE) quantities of mission essential equipment items (ERC-P or
ERC-A) that are in the unit's possession or available within 72 hours.
ot based solely on property accountability records and it does not consider the operational
readiness or serviceability of the items.
Equipment Readiness (R-level) - indicates how well the unit or organization is
maintaining its on-hand equipment
‒ R-level is determined by calculating an aggregate R-level
‒ One R-level considers all maintenance reportable equipment
‒ One R-level considers only pacing items (ERC P) LIN
‒ The overall R-level is determined by comparing the aggregate R-level and the R-levels for
pacing items
, ‒ The overall R-level is equal to the lowest of these two R-levels.
Training (T-level) - reflects the commander's assessment of unit proficiency in the
METs associated with its core functions/designed capabilities
‒ T-METL percentage is auto-calculated by NetUSR using data obtained from DTMS
‒ T assessed METs are multiplied by 3
‒ P assessed METs are multiplied by 2
‒ U assessed METs are multiplied by 1
‒ Total number of Unit METs are multiplied by 3
‒ The T-METL percentage = sum of the assessed METs divided by the sum of Total # METs
multiplied by 100
Training Days (T-Days) - reflect the number of training days the commander estimates is
required for the unit to become fully trained (T1) on its standardized METs
ADCON - Training is___authority of the Army under Title 10
Mission Essential Task (MET) proficiency - ‒ Achieved by the unit's ability to perform
METs to standard
‒ Measured by training proficiency ratings
Weapons Qualification - ‒ Individual/crew-served/special purpose/platform weapon
qualification proficiency is achieved by unit's qualifying on its organic weapons
Verified Answers 2026/27 Graded A+
Army Force Generation - -One of three military force operations
-Directs the development of Army capabilities
-Designed to efficiently generate Army Forces
over time
-Provides ready and responsive forces to the
Joint Force Commander
ReARMM- Principles and priorities - Predictability, Stability, and Synchronization
ReARMM - designed to optimize our ability to modernize and train the Total Army to
meet SECDEF directed mission requirements while maintaining our commitment to Soldiers
Allow the Army to prioritize People and Deliberate Modernization
Allows the Force to see two years in detail, three years in concept
A disciplined life cycle approach enables the Army to minimize OPTEMPO and PERSTEMPO
turbulence
ReARMM - primary phases of Unit Life Cycle Model - Modernize
,Train
Mission
Assigned Modernization (AMOD) Level One - Unit equipped with the most recent and
capable variant available
Assigned Modernization (AMOD) Level Two - Unit equipped with the next most recent
and capable variant containing some advanced capabilities to ensure interoperability
Assigned Modernization (AMOD) Level Three - Unit equipped with fully capable
equipment to meet ReARMM mission line requirements containing some advanced capabilities
to ensure interoperability.
ReARMM - Unit Life Cycles - 8 month cycles
ReARMM requirement - organizational leaders need to have have a deep understanding of
the importance of four measured areas of the
Commander's Unit Status Report (CUSR)
‒ Personnel (P-Rating)
‒ Equipment on Hand (S-Rating)
‒ Equipment Readiness (R-Rating)
‒ Training Readiness (T-Rating)
,C-Level Rating (lower is better) - Overall Readiness Assessment
Personnel (P-Level) - measures personnel readiness using three metrics for personnel fill
percentages that are based on required strength established in the unit's formal requirements and
authorizations document (MTOE or TDA)
‒ Available Personnel Strength
‒ Available MOS Strength by Duty Position
‒ Available Senior Grade Strength
Equipment on Hand (S-level) - is calculated by separately comparing the approved
authorizations document (MTOE) quantities of mission essential equipment items (ERC-P or
ERC-A) that are in the unit's possession or available within 72 hours.
ot based solely on property accountability records and it does not consider the operational
readiness or serviceability of the items.
Equipment Readiness (R-level) - indicates how well the unit or organization is
maintaining its on-hand equipment
‒ R-level is determined by calculating an aggregate R-level
‒ One R-level considers all maintenance reportable equipment
‒ One R-level considers only pacing items (ERC P) LIN
‒ The overall R-level is determined by comparing the aggregate R-level and the R-levels for
pacing items
, ‒ The overall R-level is equal to the lowest of these two R-levels.
Training (T-level) - reflects the commander's assessment of unit proficiency in the
METs associated with its core functions/designed capabilities
‒ T-METL percentage is auto-calculated by NetUSR using data obtained from DTMS
‒ T assessed METs are multiplied by 3
‒ P assessed METs are multiplied by 2
‒ U assessed METs are multiplied by 1
‒ Total number of Unit METs are multiplied by 3
‒ The T-METL percentage = sum of the assessed METs divided by the sum of Total # METs
multiplied by 100
Training Days (T-Days) - reflect the number of training days the commander estimates is
required for the unit to become fully trained (T1) on its standardized METs
ADCON - Training is___authority of the Army under Title 10
Mission Essential Task (MET) proficiency - ‒ Achieved by the unit's ability to perform
METs to standard
‒ Measured by training proficiency ratings
Weapons Qualification - ‒ Individual/crew-served/special purpose/platform weapon
qualification proficiency is achieved by unit's qualifying on its organic weapons
