Georgia Elevator Mechanic Licensure Exam
2026 | Practice Questions, Correct Answers
& Detailed Rationales | Elevator Mechanic
Certification Prep
GEORGIA ELEVATOR MECHANIC LICENSURE EXAM 2026 | PRACTICE QUESTIONS,
CORRECT ANSWERS & DETAILED RATIONALES | ELEVATOR MECHANIC
CERTIFICATION PREP
═══════════════════════════════════════════════════════
════════════════════════
STUDY MATERIAL OVERVIEW
• This comprehensive practice exam contains 200 questions mirroring the difficulty
and scope of the actual Georgia Elevator Mechanic Licensure exam, allowing you to
assess readiness and identify knowledge gaps across all tested domains.
• Work through these questions systematically by topic area, review rationales
carefully for both correct and incorrect options, and use performance patterns to
guide focused study before attempting the official examination.
═══════════════════════════════════════════════════════
════════════════════════
SECTION 1: ELEVATOR CODES AND SAFETY REGULATIONS
1. What is the primary purpose of ASME A17.1 code in elevator installations?
A) To establish aesthetic standards for elevator car design
B) To provide safety requirements for the design, installation, and maintenance of
elevators
C) To regulate the cost of elevator maintenance contracts
D) To determine the maximum speed elevators can operate
E) To specify the color requirements for safety signage
CORRECT ANSWER: B) To provide safety requirements for the design,
installation, and maintenance of elevators
,RATIONALE: ASME A17.1 is the primary American safety standard for elevators. It
establishes comprehensive safety requirements covering design, installation,
inspection, testing, maintenance, and operation of elevators and escalators.
Options A, C, D, and E address topics either not covered by ASME A17.1 or are
secondary concerns. Georgia elevator mechanics must understand that ASME A17.1
forms the foundation of safe elevator practice and is referenced extensively in state
regulations.
2. Which authority has jurisdiction over elevator safety in Georgia?
A) The Georgia Department of Agriculture
B) The Georgia Safety and Fire Inspector Board
C) The Georgia Department of Labor
D) The Environmental Protection Agency
E) The local city planning department
CORRECT ANSWER: C) The Georgia Department of Labor
RATIONALE: Georgia's elevator safety regulations fall under the jurisdiction of the
Georgia Department of Labor, specifically through its Elevator Safety Division. This
agency develops rules, conducts inspections, issues licenses to mechanics and
contractors, and enforces compliance with state and federal elevator safety codes.
Understanding the regulatory authority is essential for licensed mechanics who
must work within this framework.
3. How frequently must an in-service elevator undergo a full inspection in
Georgia?
A) Once per year
B) Once every two years
C) Once every three years
D) Once every four years
E) Only when a malfunction occurs
CORRECT ANSWER: A) Once per year
,RATIONALE: Georgia regulations require that all in-service elevators undergo at
least one complete inspection per calendar year. This annual inspection is
mandatory regardless of the elevator's condition. The frequency ensures ongoing
compliance with safety codes and helps identify emerging issues before they
become hazards. More frequent inspections may be required for high-use
installations or those with identified deficiencies.
4. What does the term "competent person" mean in elevator safety
regulations?
A) Any person with a high school diploma
B) A person who has received on-the-job training for at least one week
C) A person capable of identifying existing and predictable hazards and authorized
to take corrective action
D) Someone who has read the elevator manual
E) Any licensed electrician
CORRECT ANSWER: C) A person capable of identifying existing and predictable
hazards and authorized to take corrective action
RATIONALE: The definition of "competent person" in OSHA and ASME standards
requires both the ability to recognize hazards and the authority to implement
corrections. This goes beyond simple experience or training—it requires
demonstrated competency in hazard recognition and decision-making authority.
Licensed elevator mechanics must function as competent persons on their jobsites.
5. Which organization establishes the model code that Georgia's elevator
regulations are based upon?
A) The American Society of Mechanical Engineers (ASME)
B) The International Code Council (ICC)
C) The National Fire Protection Association (NFPA)
D) The American National Standards Institute (ANSI)
E) The Building Officials and Code Administrators (BOCA)
, CORRECT ANSWER: A) The American Society of Mechanical Engineers (ASME)
RATIONALE: ASME A17.1 serves as the foundational model code for elevator safety
across the United States, including Georgia. While other organizations like ICC and
NFPA publish related codes (such as fire safety requirements), ASME A17.1 is the
primary standard specifically governing elevator design, installation, and
maintenance. Georgia's regulations directly reference and adopt provisions from
ASME A17.1.
6. What is the maximum load capacity that must be clearly posted in every
elevator car?
A) Only the manufacturer's stated capacity
B) The rated load capacity and maximum number of occupants
C) The weight of the heaviest passenger ever transported
D) No posting is required; operators must know from training
E) The capacity is optional information
CORRECT ANSWER: B) The rated load capacity and maximum number of
occupants
RATIONALE: ASME A17.1 and Georgia regulations require that every elevator car
display the rated load capacity (in pounds and kilograms) and the maximum
number of occupants. This information must be posted on a permanent, durable
sign inside the car. This requirement ensures all users understand the limitations
and prevents overloading, which is a critical safety issue.
7. Which emergency is most frequently cited as a reason for immediate
elevator shutdown?
A) Lack of perfume smell in the car
B) Fire in the hoistway or building affecting the elevator system
C) Faded paint on the elevator shaft
D) Slight variations in door operation
E) Noise from the machine room during operation
2026 | Practice Questions, Correct Answers
& Detailed Rationales | Elevator Mechanic
Certification Prep
GEORGIA ELEVATOR MECHANIC LICENSURE EXAM 2026 | PRACTICE QUESTIONS,
CORRECT ANSWERS & DETAILED RATIONALES | ELEVATOR MECHANIC
CERTIFICATION PREP
═══════════════════════════════════════════════════════
════════════════════════
STUDY MATERIAL OVERVIEW
• This comprehensive practice exam contains 200 questions mirroring the difficulty
and scope of the actual Georgia Elevator Mechanic Licensure exam, allowing you to
assess readiness and identify knowledge gaps across all tested domains.
• Work through these questions systematically by topic area, review rationales
carefully for both correct and incorrect options, and use performance patterns to
guide focused study before attempting the official examination.
═══════════════════════════════════════════════════════
════════════════════════
SECTION 1: ELEVATOR CODES AND SAFETY REGULATIONS
1. What is the primary purpose of ASME A17.1 code in elevator installations?
A) To establish aesthetic standards for elevator car design
B) To provide safety requirements for the design, installation, and maintenance of
elevators
C) To regulate the cost of elevator maintenance contracts
D) To determine the maximum speed elevators can operate
E) To specify the color requirements for safety signage
CORRECT ANSWER: B) To provide safety requirements for the design,
installation, and maintenance of elevators
,RATIONALE: ASME A17.1 is the primary American safety standard for elevators. It
establishes comprehensive safety requirements covering design, installation,
inspection, testing, maintenance, and operation of elevators and escalators.
Options A, C, D, and E address topics either not covered by ASME A17.1 or are
secondary concerns. Georgia elevator mechanics must understand that ASME A17.1
forms the foundation of safe elevator practice and is referenced extensively in state
regulations.
2. Which authority has jurisdiction over elevator safety in Georgia?
A) The Georgia Department of Agriculture
B) The Georgia Safety and Fire Inspector Board
C) The Georgia Department of Labor
D) The Environmental Protection Agency
E) The local city planning department
CORRECT ANSWER: C) The Georgia Department of Labor
RATIONALE: Georgia's elevator safety regulations fall under the jurisdiction of the
Georgia Department of Labor, specifically through its Elevator Safety Division. This
agency develops rules, conducts inspections, issues licenses to mechanics and
contractors, and enforces compliance with state and federal elevator safety codes.
Understanding the regulatory authority is essential for licensed mechanics who
must work within this framework.
3. How frequently must an in-service elevator undergo a full inspection in
Georgia?
A) Once per year
B) Once every two years
C) Once every three years
D) Once every four years
E) Only when a malfunction occurs
CORRECT ANSWER: A) Once per year
,RATIONALE: Georgia regulations require that all in-service elevators undergo at
least one complete inspection per calendar year. This annual inspection is
mandatory regardless of the elevator's condition. The frequency ensures ongoing
compliance with safety codes and helps identify emerging issues before they
become hazards. More frequent inspections may be required for high-use
installations or those with identified deficiencies.
4. What does the term "competent person" mean in elevator safety
regulations?
A) Any person with a high school diploma
B) A person who has received on-the-job training for at least one week
C) A person capable of identifying existing and predictable hazards and authorized
to take corrective action
D) Someone who has read the elevator manual
E) Any licensed electrician
CORRECT ANSWER: C) A person capable of identifying existing and predictable
hazards and authorized to take corrective action
RATIONALE: The definition of "competent person" in OSHA and ASME standards
requires both the ability to recognize hazards and the authority to implement
corrections. This goes beyond simple experience or training—it requires
demonstrated competency in hazard recognition and decision-making authority.
Licensed elevator mechanics must function as competent persons on their jobsites.
5. Which organization establishes the model code that Georgia's elevator
regulations are based upon?
A) The American Society of Mechanical Engineers (ASME)
B) The International Code Council (ICC)
C) The National Fire Protection Association (NFPA)
D) The American National Standards Institute (ANSI)
E) The Building Officials and Code Administrators (BOCA)
, CORRECT ANSWER: A) The American Society of Mechanical Engineers (ASME)
RATIONALE: ASME A17.1 serves as the foundational model code for elevator safety
across the United States, including Georgia. While other organizations like ICC and
NFPA publish related codes (such as fire safety requirements), ASME A17.1 is the
primary standard specifically governing elevator design, installation, and
maintenance. Georgia's regulations directly reference and adopt provisions from
ASME A17.1.
6. What is the maximum load capacity that must be clearly posted in every
elevator car?
A) Only the manufacturer's stated capacity
B) The rated load capacity and maximum number of occupants
C) The weight of the heaviest passenger ever transported
D) No posting is required; operators must know from training
E) The capacity is optional information
CORRECT ANSWER: B) The rated load capacity and maximum number of
occupants
RATIONALE: ASME A17.1 and Georgia regulations require that every elevator car
display the rated load capacity (in pounds and kilograms) and the maximum
number of occupants. This information must be posted on a permanent, durable
sign inside the car. This requirement ensures all users understand the limitations
and prevents overloading, which is a critical safety issue.
7. Which emergency is most frequently cited as a reason for immediate
elevator shutdown?
A) Lack of perfume smell in the car
B) Fire in the hoistway or building affecting the elevator system
C) Faded paint on the elevator shaft
D) Slight variations in door operation
E) Noise from the machine room during operation
