Connecticut Architecture Corporation
Licensing Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationales 2027 Q&A | Instant
Download Pdf
1. What is the primary purpose of an architecture corporation license in
Connecticut?
A. To license individual architectural interns
B. To authorize a legal entity to practice or offer to practice architecture
C. To authorize construction contractors
D. To replace an individual architect's license
Answer: B. To authorize a legal entity to practice or offer to practice
architecture
Rationale: An architecture corporation license authorizes an eligible legal
entity to practice or offer to practice architecture in Connecticut. It does
not replace the individual professional license required of architects.
, 2. Before applying for an architecture corporation license, a legal entity
generally must be registered and active with which Connecticut
agency?
A. Department of Transportation
B. Department of Labor
C. Secretary of the State
D. State Building Inspector's Office
Answer: C. Secretary of the State
Rationale: The firm must be properly registered as a domestic or foreign
entity with the Connecticut Secretary of the State before applying for the
architecture firm authorization.
3. Which state agency administers professional architecture licensing
services in Connecticut?
A. Department of Consumer Protection
B. Department of Transportation
C. Department of Administrative Services
D. Department of Energy and Environmental Protection
Answer: A. Department of Consumer Protection
,Rationale: Connecticut's Department of Consumer Protection administers
architecture licensing and professional firm registration through its License
Services Division.
4. Which individual must be identified as chief executive officer for an
architecture corporation under Connecticut's current requirements?
A. Any shareholder
B. A Connecticut-licensed architect
C. Any construction manager
D. A licensed contractor
Answer: B. A Connecticut-licensed architect
Rationale: Connecticut requires the chief executive officer of an
architecture corporation covered by the applicable corporate-practice
provisions to be identified and licensed as an architect in Connecticut.
5. For a Connecticut professional corporation practicing architecture,
what minimum percentage of voting stock generally must be held by
Connecticut-licensed architects?
A. 25%
B. 50%
C. 60%
D. Two-thirds
, Answer: D. Two-thirds
Rationale: The professional-corporation ownership requirement is
generally at least two-thirds of the voting stock held by individuals licensed
under Connecticut's architecture law.
6. Which statement best describes the individual architect's professional
responsibility when working for a corporation?
A. The corporation completely eliminates individual responsibility
B. The architect remains responsible for architectural services performed by
the architect
C. Only the corporation can be disciplined
D. Responsibility automatically transfers to the contractor
Answer: B. The architect remains responsible for architectural services
performed by the architect
Rationale: Corporate organization does not relieve an individual architect
of professional responsibility for architectural services performed by that
architect.
7. Which document is associated with identifying the individual
responsible for signing and sealing architectural documents for a firm?
A. Licensee Responsible for Signing and Sealing Form
B. Contractor Affidavit
Licensing Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationales 2027 Q&A | Instant
Download Pdf
1. What is the primary purpose of an architecture corporation license in
Connecticut?
A. To license individual architectural interns
B. To authorize a legal entity to practice or offer to practice architecture
C. To authorize construction contractors
D. To replace an individual architect's license
Answer: B. To authorize a legal entity to practice or offer to practice
architecture
Rationale: An architecture corporation license authorizes an eligible legal
entity to practice or offer to practice architecture in Connecticut. It does
not replace the individual professional license required of architects.
, 2. Before applying for an architecture corporation license, a legal entity
generally must be registered and active with which Connecticut
agency?
A. Department of Transportation
B. Department of Labor
C. Secretary of the State
D. State Building Inspector's Office
Answer: C. Secretary of the State
Rationale: The firm must be properly registered as a domestic or foreign
entity with the Connecticut Secretary of the State before applying for the
architecture firm authorization.
3. Which state agency administers professional architecture licensing
services in Connecticut?
A. Department of Consumer Protection
B. Department of Transportation
C. Department of Administrative Services
D. Department of Energy and Environmental Protection
Answer: A. Department of Consumer Protection
,Rationale: Connecticut's Department of Consumer Protection administers
architecture licensing and professional firm registration through its License
Services Division.
4. Which individual must be identified as chief executive officer for an
architecture corporation under Connecticut's current requirements?
A. Any shareholder
B. A Connecticut-licensed architect
C. Any construction manager
D. A licensed contractor
Answer: B. A Connecticut-licensed architect
Rationale: Connecticut requires the chief executive officer of an
architecture corporation covered by the applicable corporate-practice
provisions to be identified and licensed as an architect in Connecticut.
5. For a Connecticut professional corporation practicing architecture,
what minimum percentage of voting stock generally must be held by
Connecticut-licensed architects?
A. 25%
B. 50%
C. 60%
D. Two-thirds
, Answer: D. Two-thirds
Rationale: The professional-corporation ownership requirement is
generally at least two-thirds of the voting stock held by individuals licensed
under Connecticut's architecture law.
6. Which statement best describes the individual architect's professional
responsibility when working for a corporation?
A. The corporation completely eliminates individual responsibility
B. The architect remains responsible for architectural services performed by
the architect
C. Only the corporation can be disciplined
D. Responsibility automatically transfers to the contractor
Answer: B. The architect remains responsible for architectural services
performed by the architect
Rationale: Corporate organization does not relieve an individual architect
of professional responsibility for architectural services performed by that
architect.
7. Which document is associated with identifying the individual
responsible for signing and sealing architectural documents for a firm?
A. Licensee Responsible for Signing and Sealing Form
B. Contractor Affidavit
