Florida Standard Modular Inspector Exam
Questions and Answers| Updated| Pass Guaranteed
1. Under Florida law, which statute establishes the requirements for
the construction of modular buildings?
A. Chapter 553, Part IV, Florida Statutes (Florida Manufactured
Buildings Act)
B. Chapter 468, Florida Statutes
C. Chapter 489, Florida Statutes
D. Chapter 633, Florida Statutes
Answer: A. Chapter 553, Part IV, Florida Statutes (Florida
Manufactured Buildings Act)
Rationale: Chapter 553, Part IV, F.S., the Florida Manufactured
Buildings Act, governs the construction and regulation of modular
(manufactured) buildings built to the Florida Building Code, separate
from licensing statutes such as Chapter 489 (contractors) or Chapter
633 (fire prevention).
2. Which state agency has historically administered the modular
building program and approved plans/inspection agencies under Rule
9B-1, F.A.C.?
A. The Department of Community Affairs (its successor functions now
under the Department of Business and Professional Regulation/Florida
Building Commission)
B. The Department of Transportation
C. The Department of Environmental Protection
D. The Department of Health
Answer: A. The Department of Community Affairs (its successor
functions now under the Department of Business and Professional
Regulation/Florida Building Commission)
Rationale: Oversight of the modular building program originated with
the Department of Community Affairs; those regulatory functions have
since been transferred to the Department of Business and Professional
Regulation and the Florida Building Commission.
Page 1
,3. To sit for the Standard Modular Inspector examination, a candidate
must generally show which of the following?
A. At least three years of qualifying inspection, plans review, or
supervisory construction experience
B. A bachelor's degree in architecture only
C. Membership in a local homebuilders association
D. Five years as a licensed real estate agent
Answer: A. At least three years of qualifying inspection, plans
review, or supervisory construction experience
Rationale: Eligibility is based on three years of experience as an
inspector with government, an independent inspection/plans review
agency under contract with the state, or as a certified
contractor/supervisor with operational control over building trades.
4. A Standard Modular Inspector license authorizes the holder to
inspect which of the following?
A. Any manufactured (modular) building and its incorporated systems for
compliance with the Florida Building Code
B. Only single-family site-built homes
C. Only HUD-code manufactured (mobile) homes
D. Only commercial high-rise structures
Answer: A. Any manufactured (modular) building and its
incorporated systems for compliance with the Florida Building
Code
Rationale: The modular inspector credential specifically authorizes
inspection of modular buildings and their incorporated building, electrical,
mechanical, and plumbing systems for code compliance.
5. Which credential allows an individual to inspect all modular
buildings across every discipline without holding the separate
Modular Inspector license?
A. A Standard Building Inspector certified in all four disciplines (building,
electrical, mechanical, plumbing)
B. A residential roofing contractor license
C. A real estate broker license
D. A notary public commission
Answer: A. A Standard Building Inspector certified in all four
disciplines (building, electrical, mechanical, plumbing)
Page 2
, Rationale: Florida rule recognizes that a Standard Building Inspector
who holds certification in all four trade disciplines has the qualifications
to also inspect modular buildings under Chapter 9B-1, F.A.C.
6. A one- and two-family dwelling inspector's authority regarding
modular units is generally limited to which scope?
A. One- and two-family modular residences regulated under the
applicable rule
B. High-rise modular hotels
C. Modular hospitals only
D. Modular buildings of any occupancy and size
Answer: A. One- and two-family modular residences regulated
under the applicable rule
Rationale: Persons certified as one- and two-family dwelling inspectors
may inspect one- and two-family modular residences, but their authority
does not extend to larger or more complex modular occupancies.
7. What is the primary purpose of requiring a standardized state
examination for the modular inspector credential?
A. To verify a minimum, consistent level of competency in code
knowledge before granting inspection authority
B. To generate licensing revenue only
C. To replace the need for any field experience
D. To satisfy federal HUD requirements
Answer: A. To verify a minimum, consistent level of competency in
code knowledge before granting inspection authority
Rationale: Standardized examinations ensure that certified inspectors
possess a validated baseline of code and trade knowledge, protecting
public safety through consistent enforcement.
8. A Modular Plans Examiner, as distinguished from a Modular
Inspector, is primarily responsible for which task?
A. Reviewing building construction plans for code compliance before
fabrication begins
B. Performing all in-plant welding
C. Selling modular units to consumers
D. Only inspecting completed site work
Answer: A. Reviewing building construction plans for code
compliance before fabrication begins
Page 3
, Rationale: The Plans Examiner reviews and approves plans for
compliance with applicable codes, while the Inspector verifies that
construction in the plant and field matches those approved plans.
9. Continuing education requirements for Florida building code
inspectors typically include mandatory hours in which topical areas?
A. Accessibility, Florida law and rules, and ethics, among general code
updates
B. Marketing and sales
C. Real estate finance
D. Foreign language proficiency
Answer: A. Accessibility, Florida law and rules, and ethics, among
general code updates
Rationale: Florida generally requires a minimum number of hours in
accessibility, law and rules, and ethics as part of the biennial continuing
education requirement for building-related licenses.
Section 2: Roles and Responsibilities of the Modular Inspector
10. What is a primary responsibility of the modular inspector when
visiting a manufacturing plant?
A. Verify that the state-approved plans are on-site in the factory and that
units are being built in accordance with them
B. Approve the plant's business license
C. Set the retail sales price of the units
D. Collect sales tax on behalf of the state
Answer: A. Verify that the state-approved plans are on-site in the
factory and that units are being built in accordance with them
Rationale: The modular inspector must confirm the approved plans are
present and being followed, since factory production must match the
plans that were reviewed and approved.
Page 4
Questions and Answers| Updated| Pass Guaranteed
1. Under Florida law, which statute establishes the requirements for
the construction of modular buildings?
A. Chapter 553, Part IV, Florida Statutes (Florida Manufactured
Buildings Act)
B. Chapter 468, Florida Statutes
C. Chapter 489, Florida Statutes
D. Chapter 633, Florida Statutes
Answer: A. Chapter 553, Part IV, Florida Statutes (Florida
Manufactured Buildings Act)
Rationale: Chapter 553, Part IV, F.S., the Florida Manufactured
Buildings Act, governs the construction and regulation of modular
(manufactured) buildings built to the Florida Building Code, separate
from licensing statutes such as Chapter 489 (contractors) or Chapter
633 (fire prevention).
2. Which state agency has historically administered the modular
building program and approved plans/inspection agencies under Rule
9B-1, F.A.C.?
A. The Department of Community Affairs (its successor functions now
under the Department of Business and Professional Regulation/Florida
Building Commission)
B. The Department of Transportation
C. The Department of Environmental Protection
D. The Department of Health
Answer: A. The Department of Community Affairs (its successor
functions now under the Department of Business and Professional
Regulation/Florida Building Commission)
Rationale: Oversight of the modular building program originated with
the Department of Community Affairs; those regulatory functions have
since been transferred to the Department of Business and Professional
Regulation and the Florida Building Commission.
Page 1
,3. To sit for the Standard Modular Inspector examination, a candidate
must generally show which of the following?
A. At least three years of qualifying inspection, plans review, or
supervisory construction experience
B. A bachelor's degree in architecture only
C. Membership in a local homebuilders association
D. Five years as a licensed real estate agent
Answer: A. At least three years of qualifying inspection, plans
review, or supervisory construction experience
Rationale: Eligibility is based on three years of experience as an
inspector with government, an independent inspection/plans review
agency under contract with the state, or as a certified
contractor/supervisor with operational control over building trades.
4. A Standard Modular Inspector license authorizes the holder to
inspect which of the following?
A. Any manufactured (modular) building and its incorporated systems for
compliance with the Florida Building Code
B. Only single-family site-built homes
C. Only HUD-code manufactured (mobile) homes
D. Only commercial high-rise structures
Answer: A. Any manufactured (modular) building and its
incorporated systems for compliance with the Florida Building
Code
Rationale: The modular inspector credential specifically authorizes
inspection of modular buildings and their incorporated building, electrical,
mechanical, and plumbing systems for code compliance.
5. Which credential allows an individual to inspect all modular
buildings across every discipline without holding the separate
Modular Inspector license?
A. A Standard Building Inspector certified in all four disciplines (building,
electrical, mechanical, plumbing)
B. A residential roofing contractor license
C. A real estate broker license
D. A notary public commission
Answer: A. A Standard Building Inspector certified in all four
disciplines (building, electrical, mechanical, plumbing)
Page 2
, Rationale: Florida rule recognizes that a Standard Building Inspector
who holds certification in all four trade disciplines has the qualifications
to also inspect modular buildings under Chapter 9B-1, F.A.C.
6. A one- and two-family dwelling inspector's authority regarding
modular units is generally limited to which scope?
A. One- and two-family modular residences regulated under the
applicable rule
B. High-rise modular hotels
C. Modular hospitals only
D. Modular buildings of any occupancy and size
Answer: A. One- and two-family modular residences regulated
under the applicable rule
Rationale: Persons certified as one- and two-family dwelling inspectors
may inspect one- and two-family modular residences, but their authority
does not extend to larger or more complex modular occupancies.
7. What is the primary purpose of requiring a standardized state
examination for the modular inspector credential?
A. To verify a minimum, consistent level of competency in code
knowledge before granting inspection authority
B. To generate licensing revenue only
C. To replace the need for any field experience
D. To satisfy federal HUD requirements
Answer: A. To verify a minimum, consistent level of competency in
code knowledge before granting inspection authority
Rationale: Standardized examinations ensure that certified inspectors
possess a validated baseline of code and trade knowledge, protecting
public safety through consistent enforcement.
8. A Modular Plans Examiner, as distinguished from a Modular
Inspector, is primarily responsible for which task?
A. Reviewing building construction plans for code compliance before
fabrication begins
B. Performing all in-plant welding
C. Selling modular units to consumers
D. Only inspecting completed site work
Answer: A. Reviewing building construction plans for code
compliance before fabrication begins
Page 3
, Rationale: The Plans Examiner reviews and approves plans for
compliance with applicable codes, while the Inspector verifies that
construction in the plant and field matches those approved plans.
9. Continuing education requirements for Florida building code
inspectors typically include mandatory hours in which topical areas?
A. Accessibility, Florida law and rules, and ethics, among general code
updates
B. Marketing and sales
C. Real estate finance
D. Foreign language proficiency
Answer: A. Accessibility, Florida law and rules, and ethics, among
general code updates
Rationale: Florida generally requires a minimum number of hours in
accessibility, law and rules, and ethics as part of the biennial continuing
education requirement for building-related licenses.
Section 2: Roles and Responsibilities of the Modular Inspector
10. What is a primary responsibility of the modular inspector when
visiting a manufacturing plant?
A. Verify that the state-approved plans are on-site in the factory and that
units are being built in accordance with them
B. Approve the plant's business license
C. Set the retail sales price of the units
D. Collect sales tax on behalf of the state
Answer: A. Verify that the state-approved plans are on-site in the
factory and that units are being built in accordance with them
Rationale: The modular inspector must confirm the approved plans are
present and being followed, since factory production must match the
plans that were reviewed and approved.
Page 4
