NYC SIGN HANGER LICENSE EXAM QUESTIONS
AND CORRECT ANSWERS (VERIFIED ANSWERS)
PLUS RATIONALES 2026 Q&A | INSTANT
DOWNLOAD PDF. The New York City Sign Hanger
License examination assesses the knowledge,
skills and judgment required to safely hoist,
lower, hang and attach exterior signs within the
five borough
Core Domains
Licensing Authority, Scope and Exemptions
Special and Master Sign Hanger Qualifications
Sign Classification, Measurement and Permit Requirements
Plans, Specifications and Structural Supports
Rigging, Hoisting, Loads and Critical Operations
Site Safety, Fall Protection and Public Protection
Regulatory Compliance and Administrative Requirements
Inspection, Defective Conditions and Professional Judgment
Introduction
The New York City Sign Hanger License examination assesses the knowledge,
skills and judgment required to safely hoist, lower, hang and attach exterior
signs within the five boroughs. Candidates must demonstrate mastery of
licensing scope, structural principles, rigging operations, safety protocols,
permit procedures and regulatory compliance. The examination employs
multiple-choice and scenario-based questions that test real-world decision-
making rather than simple recall. Successful candidates must apply
professional judgment to complex job-site conditions while ensuring public
,safety and adherence to the New York City Construction Codes and
Administrative Code.
SECTION ONE: QUESTIONS 1–100
Question 1
Which New York City agency primarily regulates the licensing of sign hangers
and the installation of exterior signs?
A. New York City Department of Transportation
B. New York City Department of Buildings
C. New York City Fire Department
D. New York City Department of Consumer and Worker Protection
B. New York City Department of Buildings
RATIONALE: The New York City Department of Buildings administers
and enforces licensing, permitting, and safety requirements for sign hanger
contractors and sign installation work.
Question 2
A Special Sign Hanger license authorizes the licensee to hoist, lower, hang, or
attach an exterior sign that does not exceed which maximum face area?
A. 75 square feet
B. 100 square feet
C. 150 square feet
D. 200 square feet
C. 150 square feet
RATIONALE: The Special Sign Hanger scope is limited to exterior signs
not exceeding 150 square feet measured on one face and not exceeding 1,200
pounds.
Question 3
,A proposed sign measures 140 square feet on one face and weighs 1,150
pounds. No exemption applies. Which license classification is specifically
authorized to perform the sign-hanging work?
A. No sign hanger license is required because the sign is under 150 square feet
B. Special Sign Hanger
C. Master Sign Hanger only
D. Registered Filing Representative
B. Special Sign Hanger
RATIONALE: A Special Sign Hanger may perform sign-hanging work on
exterior signs not exceeding 150 square feet on one face and not exceeding
1,200 pounds. Both thresholds are satisfied in this scenario.
Question 4
A sign is 149 square feet on its face but weighs 1,250 pounds. The contractor
proposes to proceed under a Special Sign Hanger license because the area is
within the limit. What is the critical issue?
A. The weight exceeds the Special Sign Hanger limit of 1,200 pounds
B. The area is automatically considered two faces
C. Weight is irrelevant for Special Sign Hanger authorization
D. Only the sign's illumination determines the license category
A. The weight exceeds the Special Sign Hanger limit of 1,200 pounds
RATIONALE: The Special Sign Hanger limitation is conjunctive: the sign
must not exceed both 150 square feet and 1,200 pounds. Exceeding either
threshold places the work outside that license scope.
Question 5
Which of the following is an exemption from the NYC sign hanger licensing
requirement?
A. A 100-square-foot sign weighing 30 pounds
B. A 70-square-foot sign weighing 25 pounds
, C. A 90-square-foot sign weighing 15 pounds
D. A 100-square-foot sign weighing 25 pounds
B. A 70-square-foot sign weighing 25 pounds
RATIONALE: One exemption applies to signs not exceeding 75 square feet
measured on one face and not exceeding 25 pounds. The 70-square-foot, 25-
pound sign satisfies both limits.
Question 6
A sign measures 80 square feet and weighs 20 pounds. Is it exempt under the
size-and-weight exemption?
A. Yes, because it weighs less than 25 pounds
B. Yes, because it is less than 100 square feet
C. No, because it exceeds 75 square feet
D. Yes, if it is illuminated
C. No, because it exceeds 75 square feet
RATIONALE: Both limits must be satisfied for the exemption. Although
the sign is under 25 pounds, it exceeds 75 square feet and therefore does not
qualify.
Question 7
Which type of sign is exempt from the sign hanger licensing requirement
because of its method of support?
A. A wall-mounted sign
B. A roof-mounted sign
C. A sign supported directly on the ground
D. A projecting sign
C. A sign supported directly on the ground
RATIONALE: Signs supported directly on the ground are specifically
listed among the exemptions from sign hanger licensing requirements.
AND CORRECT ANSWERS (VERIFIED ANSWERS)
PLUS RATIONALES 2026 Q&A | INSTANT
DOWNLOAD PDF. The New York City Sign Hanger
License examination assesses the knowledge,
skills and judgment required to safely hoist,
lower, hang and attach exterior signs within the
five borough
Core Domains
Licensing Authority, Scope and Exemptions
Special and Master Sign Hanger Qualifications
Sign Classification, Measurement and Permit Requirements
Plans, Specifications and Structural Supports
Rigging, Hoisting, Loads and Critical Operations
Site Safety, Fall Protection and Public Protection
Regulatory Compliance and Administrative Requirements
Inspection, Defective Conditions and Professional Judgment
Introduction
The New York City Sign Hanger License examination assesses the knowledge,
skills and judgment required to safely hoist, lower, hang and attach exterior
signs within the five boroughs. Candidates must demonstrate mastery of
licensing scope, structural principles, rigging operations, safety protocols,
permit procedures and regulatory compliance. The examination employs
multiple-choice and scenario-based questions that test real-world decision-
making rather than simple recall. Successful candidates must apply
professional judgment to complex job-site conditions while ensuring public
,safety and adherence to the New York City Construction Codes and
Administrative Code.
SECTION ONE: QUESTIONS 1–100
Question 1
Which New York City agency primarily regulates the licensing of sign hangers
and the installation of exterior signs?
A. New York City Department of Transportation
B. New York City Department of Buildings
C. New York City Fire Department
D. New York City Department of Consumer and Worker Protection
B. New York City Department of Buildings
RATIONALE: The New York City Department of Buildings administers
and enforces licensing, permitting, and safety requirements for sign hanger
contractors and sign installation work.
Question 2
A Special Sign Hanger license authorizes the licensee to hoist, lower, hang, or
attach an exterior sign that does not exceed which maximum face area?
A. 75 square feet
B. 100 square feet
C. 150 square feet
D. 200 square feet
C. 150 square feet
RATIONALE: The Special Sign Hanger scope is limited to exterior signs
not exceeding 150 square feet measured on one face and not exceeding 1,200
pounds.
Question 3
,A proposed sign measures 140 square feet on one face and weighs 1,150
pounds. No exemption applies. Which license classification is specifically
authorized to perform the sign-hanging work?
A. No sign hanger license is required because the sign is under 150 square feet
B. Special Sign Hanger
C. Master Sign Hanger only
D. Registered Filing Representative
B. Special Sign Hanger
RATIONALE: A Special Sign Hanger may perform sign-hanging work on
exterior signs not exceeding 150 square feet on one face and not exceeding
1,200 pounds. Both thresholds are satisfied in this scenario.
Question 4
A sign is 149 square feet on its face but weighs 1,250 pounds. The contractor
proposes to proceed under a Special Sign Hanger license because the area is
within the limit. What is the critical issue?
A. The weight exceeds the Special Sign Hanger limit of 1,200 pounds
B. The area is automatically considered two faces
C. Weight is irrelevant for Special Sign Hanger authorization
D. Only the sign's illumination determines the license category
A. The weight exceeds the Special Sign Hanger limit of 1,200 pounds
RATIONALE: The Special Sign Hanger limitation is conjunctive: the sign
must not exceed both 150 square feet and 1,200 pounds. Exceeding either
threshold places the work outside that license scope.
Question 5
Which of the following is an exemption from the NYC sign hanger licensing
requirement?
A. A 100-square-foot sign weighing 30 pounds
B. A 70-square-foot sign weighing 25 pounds
, C. A 90-square-foot sign weighing 15 pounds
D. A 100-square-foot sign weighing 25 pounds
B. A 70-square-foot sign weighing 25 pounds
RATIONALE: One exemption applies to signs not exceeding 75 square feet
measured on one face and not exceeding 25 pounds. The 70-square-foot, 25-
pound sign satisfies both limits.
Question 6
A sign measures 80 square feet and weighs 20 pounds. Is it exempt under the
size-and-weight exemption?
A. Yes, because it weighs less than 25 pounds
B. Yes, because it is less than 100 square feet
C. No, because it exceeds 75 square feet
D. Yes, if it is illuminated
C. No, because it exceeds 75 square feet
RATIONALE: Both limits must be satisfied for the exemption. Although
the sign is under 25 pounds, it exceeds 75 square feet and therefore does not
qualify.
Question 7
Which type of sign is exempt from the sign hanger licensing requirement
because of its method of support?
A. A wall-mounted sign
B. A roof-mounted sign
C. A sign supported directly on the ground
D. A projecting sign
C. A sign supported directly on the ground
RATIONALE: Signs supported directly on the ground are specifically
listed among the exemptions from sign hanger licensing requirements.
