AVIXA CTS COMPLETE EXAMINATION TEST
QUESTIONS WITH VERIFIED SOLUTIONS
●● A client approaches an AV provider with a project requirement to set
up an audiovisual system for their newly constructed conference room.
The client emphasizes the importance of seamless video conferencing
capabilities and high-quality audio output. What would be the MOST
appropriate initial step for the AV provider to take based on the
information provided?
Answer: Conduct a needs analysis
●● Which term BEST describes the needs analysis process?
Answer: Defining user needs and desires
●● What is the term that describes comparing an existing installation
with a new project?
Answer: Benchmarking
●● What role does the AV professional typically play in conducting a
needs analysis?
Answer: Facilitator of design collaboration
●● Which statement BEST shows why a needs analysis is important for
an AV project?
,Answer: Needs analysis ensures that end-users' requirements are
accurately identified and addressed.
●● When establishing initial contact with a client, try to develop a
relationship early on with the _____.
Answer: stakeholders
●● On a tour of the facility during the preliminary site survey, it was
pointed out that the AV rack closet is 76 m (250 ft) from the room where
the multi-purpose room will be going. Why is that a concern for the AV
professional?
Answer: Cat cables have a distance limitation.
●● While evaluating a site environment, a room appears to suffer from
reverberation. What treatment could be recommended to improve the
acoustics in the room
Answer: Use soft furnishings and flooring
●● Prior to performing a site assessment and new system design the
______ should be identified.
Answer: client's needs and intended uses
●● During an initial site survey, it is noted that there are no window
treatments on the windows of the planned project room, potentially
causing excessive glare. What should be done to address this issue?
,Answer: Recommend installing window treatments to the client to
mitigate glare issues.
●● Common measurements used in AV for seated and standing eye and
ear heights are:
Answer: In AV system design, standard measurements are used as
reference points:
Seated eye/ear height: 1.2 m (48 inches)
Standing eye/ear height: 1.7 m (68 inches)
●● What is the primary purpose of conducting an initial site survey for
an AV project?
Answer: To gather information about the physical space and logistical
considerations.
●● Projectors may use different lamp technologies for different reasons.
For long life without changing the light source, which technology is
preferred?
Answer: LED lamp
●● During the stakeholder meeting to present the program report, the AV
Sales Manager realizes that some stakeholders have questions beyond
the scope of the report. What should the manager do?
Answer: Address the additional questions and assure stakeholders that
their concerns will be considered.
, ●● What distinguishes a section cut drawing from an elevation drawing?
Answer: A section cut shows the ceiling above and the floor below; an
elevation provides a view of the vertical surface (not a top-down view)
Section Cut Drawing: Shows a vertical slice through a building,
revealing the interior construction including ceiling, walls, and floor as
if the building were cut through. It's like looking at the building that has
been sliced vertically, showing what's inside the walls, ceiling
construction, and floor composition
●● What's an elevation drawing
Answer: Elevation Drawing: Shows the vertical face or façade of a wall
or surface (interior or exterior) as a 2D representation. It's a head-on
view of a vertical surface without showing what's inside or behind it.
●● After presenting a proposal to a client, confirming that all objections
are answered and that the final buying decision will be made at an
internal meeting, what is the next step?
Answer: Communicate regularly, until a decision is made
●● Which of the following statements accurately describes the purpose
of compiling information for an AV project scope?
Answer: To ensure the proposed system meets the needs of stakeholders.
QUESTIONS WITH VERIFIED SOLUTIONS
●● A client approaches an AV provider with a project requirement to set
up an audiovisual system for their newly constructed conference room.
The client emphasizes the importance of seamless video conferencing
capabilities and high-quality audio output. What would be the MOST
appropriate initial step for the AV provider to take based on the
information provided?
Answer: Conduct a needs analysis
●● Which term BEST describes the needs analysis process?
Answer: Defining user needs and desires
●● What is the term that describes comparing an existing installation
with a new project?
Answer: Benchmarking
●● What role does the AV professional typically play in conducting a
needs analysis?
Answer: Facilitator of design collaboration
●● Which statement BEST shows why a needs analysis is important for
an AV project?
,Answer: Needs analysis ensures that end-users' requirements are
accurately identified and addressed.
●● When establishing initial contact with a client, try to develop a
relationship early on with the _____.
Answer: stakeholders
●● On a tour of the facility during the preliminary site survey, it was
pointed out that the AV rack closet is 76 m (250 ft) from the room where
the multi-purpose room will be going. Why is that a concern for the AV
professional?
Answer: Cat cables have a distance limitation.
●● While evaluating a site environment, a room appears to suffer from
reverberation. What treatment could be recommended to improve the
acoustics in the room
Answer: Use soft furnishings and flooring
●● Prior to performing a site assessment and new system design the
______ should be identified.
Answer: client's needs and intended uses
●● During an initial site survey, it is noted that there are no window
treatments on the windows of the planned project room, potentially
causing excessive glare. What should be done to address this issue?
,Answer: Recommend installing window treatments to the client to
mitigate glare issues.
●● Common measurements used in AV for seated and standing eye and
ear heights are:
Answer: In AV system design, standard measurements are used as
reference points:
Seated eye/ear height: 1.2 m (48 inches)
Standing eye/ear height: 1.7 m (68 inches)
●● What is the primary purpose of conducting an initial site survey for
an AV project?
Answer: To gather information about the physical space and logistical
considerations.
●● Projectors may use different lamp technologies for different reasons.
For long life without changing the light source, which technology is
preferred?
Answer: LED lamp
●● During the stakeholder meeting to present the program report, the AV
Sales Manager realizes that some stakeholders have questions beyond
the scope of the report. What should the manager do?
Answer: Address the additional questions and assure stakeholders that
their concerns will be considered.
, ●● What distinguishes a section cut drawing from an elevation drawing?
Answer: A section cut shows the ceiling above and the floor below; an
elevation provides a view of the vertical surface (not a top-down view)
Section Cut Drawing: Shows a vertical slice through a building,
revealing the interior construction including ceiling, walls, and floor as
if the building were cut through. It's like looking at the building that has
been sliced vertically, showing what's inside the walls, ceiling
construction, and floor composition
●● What's an elevation drawing
Answer: Elevation Drawing: Shows the vertical face or façade of a wall
or surface (interior or exterior) as a 2D representation. It's a head-on
view of a vertical surface without showing what's inside or behind it.
●● After presenting a proposal to a client, confirming that all objections
are answered and that the final buying decision will be made at an
internal meeting, what is the next step?
Answer: Communicate regularly, until a decision is made
●● Which of the following statements accurately describes the purpose
of compiling information for an AV project scope?
Answer: To ensure the proposed system meets the needs of stakeholders.
