SACA CERTIFICATION C-101 2027 UPDATE WITH COMPLETE
SOLUTIONS
Question 1.
The three Fs of product design are form, fit and __________.
Correct Answer: Function
Question 2.
High product quality, the primary goals
Correct Answer: quick delivery, low costs are Lean Manufacturing of what
system?
Question 3.
Which 5S step involves formatting 5S work instructions so that they look and read alike?
Correct Answer: Standardize
Question 4.
How does the 5S method aid in the goal of lean manufacturing?
Correct Answer: Reduces the waste of excess motion, helps improve morale, and
enables other lean methods to be more successful
Question 5.
What is the interface load and monitor
Correct Answer: used with CNC machines to HMI programs?
Question 6.
The automation of processes is done puter called a __________.
Correct Answer: many different manufacturing PLC through the use of a small
com-
Question 7.
When a machine stops due to an problem, what would the machine's HMI typically display?
Correct Answer: An error message.
Question 8.
Smart sensors connected to manufacturing net-works creates what level of Industry?
,Correct Answer: Industry 4.0
Question 9.
What standard introduced in the early 1980s established a method to physically connect
machines from different manufacturers enabling them to communicate to one another?
Correct Answer: Ethernet
Question 10.
Which IIoT application ing normal operation equipment?
Correct Answer: Predictive maintenance monitors equipment dur-to prevent
failures to the
Question 11.
Occupational Safety and Health Administration(OSHA) develops __________ for safety retail
and service industries to construction and manufacturing.
Correct Answer: Standards
Question 12.
The regulation that requires manufacturers to document and report information on the
types of chemicals they use, store, release into the environment, or dispose of is known as
EPCRA. Is this statement TRUE or FALSE?
Correct Answer: True
Question 13.
The use of ___________________marked the advent of the third industrial revolution?
Correct Answer: Computers
Question 14.
If an operator knows a machine, the operator
Correct Answer: a safety problem exists with Notify a supervisor immediately
should __________.
Question 15.
A(n) __________ is a device or system that shuts down a machine immediately if the
operator is in danger.
Correct Answer: Emergency stop
, Question 16.
If the energy sources this mean for a pneumatic
Correct Answer: are shut down, what would It is closed valve?
Question 17.
What are the 5 steps
Correct Answer: of electrical Lockout/tagout 1. Shut down the equipment
2.Connect Hasp 3. Attach Lock 4. Add Tag 5. Test Start Equipment
Question 18.
Which of the following is a common cause of workplace death?
Correct Answer: Falls
Question 19.
The process of identifying workplace is known
Correct Answer: potential hazards in the Hazard assessment as a __________.
Question 20.
An injury is defined that happens as a form of energy that Is this statement
Correct Answer: as physical harm to the body TRUE result of exposure to some
exceeds the body's tolerance. TRUE or FALSE?
Question 21.
In the event of an evacuation alarm, employees should __________.
Correct Answer: Shut down their machines and leave the building
Question 22.
After exposure to be flushed continuously
Correct Answer: most chemicals the eyes should 15 for __________ minutes.
Question 23.
Grease is made from added to it to make
Correct Answer: a liquid lubricant with what Thickeners it semi-solid?
SOLUTIONS
Question 1.
The three Fs of product design are form, fit and __________.
Correct Answer: Function
Question 2.
High product quality, the primary goals
Correct Answer: quick delivery, low costs are Lean Manufacturing of what
system?
Question 3.
Which 5S step involves formatting 5S work instructions so that they look and read alike?
Correct Answer: Standardize
Question 4.
How does the 5S method aid in the goal of lean manufacturing?
Correct Answer: Reduces the waste of excess motion, helps improve morale, and
enables other lean methods to be more successful
Question 5.
What is the interface load and monitor
Correct Answer: used with CNC machines to HMI programs?
Question 6.
The automation of processes is done puter called a __________.
Correct Answer: many different manufacturing PLC through the use of a small
com-
Question 7.
When a machine stops due to an problem, what would the machine's HMI typically display?
Correct Answer: An error message.
Question 8.
Smart sensors connected to manufacturing net-works creates what level of Industry?
,Correct Answer: Industry 4.0
Question 9.
What standard introduced in the early 1980s established a method to physically connect
machines from different manufacturers enabling them to communicate to one another?
Correct Answer: Ethernet
Question 10.
Which IIoT application ing normal operation equipment?
Correct Answer: Predictive maintenance monitors equipment dur-to prevent
failures to the
Question 11.
Occupational Safety and Health Administration(OSHA) develops __________ for safety retail
and service industries to construction and manufacturing.
Correct Answer: Standards
Question 12.
The regulation that requires manufacturers to document and report information on the
types of chemicals they use, store, release into the environment, or dispose of is known as
EPCRA. Is this statement TRUE or FALSE?
Correct Answer: True
Question 13.
The use of ___________________marked the advent of the third industrial revolution?
Correct Answer: Computers
Question 14.
If an operator knows a machine, the operator
Correct Answer: a safety problem exists with Notify a supervisor immediately
should __________.
Question 15.
A(n) __________ is a device or system that shuts down a machine immediately if the
operator is in danger.
Correct Answer: Emergency stop
, Question 16.
If the energy sources this mean for a pneumatic
Correct Answer: are shut down, what would It is closed valve?
Question 17.
What are the 5 steps
Correct Answer: of electrical Lockout/tagout 1. Shut down the equipment
2.Connect Hasp 3. Attach Lock 4. Add Tag 5. Test Start Equipment
Question 18.
Which of the following is a common cause of workplace death?
Correct Answer: Falls
Question 19.
The process of identifying workplace is known
Correct Answer: potential hazards in the Hazard assessment as a __________.
Question 20.
An injury is defined that happens as a form of energy that Is this statement
Correct Answer: as physical harm to the body TRUE result of exposure to some
exceeds the body's tolerance. TRUE or FALSE?
Question 21.
In the event of an evacuation alarm, employees should __________.
Correct Answer: Shut down their machines and leave the building
Question 22.
After exposure to be flushed continuously
Correct Answer: most chemicals the eyes should 15 for __________ minutes.
Question 23.
Grease is made from added to it to make
Correct Answer: a liquid lubricant with what Thickeners it semi-solid?
