State Farm Auto Adjuster FINAL
ASSESSMENT EXAM 2024-2026| 100%
ACCURATE ANSWERS!!
, ACV - correct ans:actual cash value
After Market Parts - correct ans:Parts produced by a 3rd party for use on
automobiles.
Betterment - correct ans:An improvement made to and automobile that
increases its value, rather than a repair that simply maintains its current
value
BL - correct ans:Blend
Blend - correct ans:This operation is equal to half the RF time on a panel.
Blend would be necessary if an adjacent panel required some paint so the
color would match. If damage is within 18" of an adjacent panel then blend.
Allow 36" if it is a metallic or gold paint, because the paints are hard to
match.
Bridge - correct ans:Bridging occurs between 2 surfaces painted at the same
time. A good example would be seen between a molding and the panel
Eventually the bridge will crack between the two and the integrity of the
paint will deteriorate. Bridging is most often related to R&I. If a shoes does
not strip a panel naked then bridging will most likely occur.
CEG - correct ans:Collision Estimating Guide
Collision Estimating Guide - correct ans:A reference for how much time the
average mechanic or painter will require performing a specific task.
Clean and Retape - correct ans:When an adhesive molding, nameplate, or
emblem is removed and reinstalled. The painter must clean the glue off and
apply a new coat.
ASSESSMENT EXAM 2024-2026| 100%
ACCURATE ANSWERS!!
, ACV - correct ans:actual cash value
After Market Parts - correct ans:Parts produced by a 3rd party for use on
automobiles.
Betterment - correct ans:An improvement made to and automobile that
increases its value, rather than a repair that simply maintains its current
value
BL - correct ans:Blend
Blend - correct ans:This operation is equal to half the RF time on a panel.
Blend would be necessary if an adjacent panel required some paint so the
color would match. If damage is within 18" of an adjacent panel then blend.
Allow 36" if it is a metallic or gold paint, because the paints are hard to
match.
Bridge - correct ans:Bridging occurs between 2 surfaces painted at the same
time. A good example would be seen between a molding and the panel
Eventually the bridge will crack between the two and the integrity of the
paint will deteriorate. Bridging is most often related to R&I. If a shoes does
not strip a panel naked then bridging will most likely occur.
CEG - correct ans:Collision Estimating Guide
Collision Estimating Guide - correct ans:A reference for how much time the
average mechanic or painter will require performing a specific task.
Clean and Retape - correct ans:When an adhesive molding, nameplate, or
emblem is removed and reinstalled. The painter must clean the glue off and
apply a new coat.
