CDCR MAJOR 3 ACTUAL FINALS ANSWERS AND
QUESTIONS SET A+
✔✔Objective 5: identify 6 safe practices for transporting inmates - ✔✔1) inmate position
in the vehicle- inmate behind driver seat in sedan
2) preferred lane of travel- fast lane
3) observe all traffic laws
4) use predetermined routes
5) safety zone- don't break inmate compartment w/o authorization
6) notify upon arrival & departure
✔✔Objective 6: identify the 3 roles a CO may assume when transporting an inmate to a
hospital by ambulance - ✔✔1) ambulance escort officer
2) the chase vehicle officer
3) hospital coverage officer
✔✔Objective 7: identify your responsibilities if an inmate needs to use the restroom
during a transport - ✔✔-Contact officer: search restroom, escort and maintain constant
and direct observation of the inmate at all times
-Cover officer: keeps public away, maintains security of the vehicle
✔✔Objective 8: identify responsibilities you will have when an inmate your transporting
escapes - ✔✔- initiate a reasonable pursuit procedure w/o loosing custody of any
remaining inmates or endangering civilians.
- utilize the cell phone or CMARS to:
Contact nearest local law enforcement
Contact your institution, the nearest institution or dial 911
✔✔Objective 1: 4 safety rules for handling less lethal impact weapons at all times -
✔✔1) Treat all weapons as if they were loaded
2) Never point a weapon at anything you are not willing to shoot or destroy
3) Never place your finger on the trigger until your sights are on the target and you have
made the decision to fire
, 4) Always be aware of your target, it's backstop and what is beyond it, before firing the
weapon.
✔✔Objective 2: Given a graphic of a 40mm single shot launcher you will identify it's
primary components - ✔✔1) Butt
2) Stock
3) Catch lever
4) Rear Sight
5) Front Sight
6) Barrell
7)Muzzle
8) Fore grip
9) Trigger
10) Pistol Grip
✔✔Penn Arms Launcher Nomenclature - ✔✔1) Butt
2) Stock
3) Catch Lever
4) Rear sight
5) Front sight
6) Barrel
7) Muzzle
8) Fire Grip
9) Trigger
10) Pistol Grip
✔✔Objective 3: identify 3 authorized safe holding carrying positions of the CDCR
approved impact munitions launchers - ✔✔1) Low Ready
2) Indoor Ready
3) Contact Ready
✔✔Indoor ready - ✔✔Launcher quants the torso pointing down at an angle with the
trigger finger indexed, Response stage
✔✔Low ready - ✔✔Forward at 45° low to see adversary
Finger indexed
Feet shoulder width apart knees bent
Upper body lean slightly
Strong hand pulls butt into the pocket of the shoulder
Head up eyes scanning
✔✔Contact Ready - ✔✔Raising the muzzle of the launcher and pulling the butt of the
weapon firmly into the strong side shoulder
Cheek on the comb
Toes facing adversary
QUESTIONS SET A+
✔✔Objective 5: identify 6 safe practices for transporting inmates - ✔✔1) inmate position
in the vehicle- inmate behind driver seat in sedan
2) preferred lane of travel- fast lane
3) observe all traffic laws
4) use predetermined routes
5) safety zone- don't break inmate compartment w/o authorization
6) notify upon arrival & departure
✔✔Objective 6: identify the 3 roles a CO may assume when transporting an inmate to a
hospital by ambulance - ✔✔1) ambulance escort officer
2) the chase vehicle officer
3) hospital coverage officer
✔✔Objective 7: identify your responsibilities if an inmate needs to use the restroom
during a transport - ✔✔-Contact officer: search restroom, escort and maintain constant
and direct observation of the inmate at all times
-Cover officer: keeps public away, maintains security of the vehicle
✔✔Objective 8: identify responsibilities you will have when an inmate your transporting
escapes - ✔✔- initiate a reasonable pursuit procedure w/o loosing custody of any
remaining inmates or endangering civilians.
- utilize the cell phone or CMARS to:
Contact nearest local law enforcement
Contact your institution, the nearest institution or dial 911
✔✔Objective 1: 4 safety rules for handling less lethal impact weapons at all times -
✔✔1) Treat all weapons as if they were loaded
2) Never point a weapon at anything you are not willing to shoot or destroy
3) Never place your finger on the trigger until your sights are on the target and you have
made the decision to fire
, 4) Always be aware of your target, it's backstop and what is beyond it, before firing the
weapon.
✔✔Objective 2: Given a graphic of a 40mm single shot launcher you will identify it's
primary components - ✔✔1) Butt
2) Stock
3) Catch lever
4) Rear Sight
5) Front Sight
6) Barrell
7)Muzzle
8) Fore grip
9) Trigger
10) Pistol Grip
✔✔Penn Arms Launcher Nomenclature - ✔✔1) Butt
2) Stock
3) Catch Lever
4) Rear sight
5) Front sight
6) Barrel
7) Muzzle
8) Fire Grip
9) Trigger
10) Pistol Grip
✔✔Objective 3: identify 3 authorized safe holding carrying positions of the CDCR
approved impact munitions launchers - ✔✔1) Low Ready
2) Indoor Ready
3) Contact Ready
✔✔Indoor ready - ✔✔Launcher quants the torso pointing down at an angle with the
trigger finger indexed, Response stage
✔✔Low ready - ✔✔Forward at 45° low to see adversary
Finger indexed
Feet shoulder width apart knees bent
Upper body lean slightly
Strong hand pulls butt into the pocket of the shoulder
Head up eyes scanning
✔✔Contact Ready - ✔✔Raising the muzzle of the launcher and pulling the butt of the
weapon firmly into the strong side shoulder
Cheek on the comb
Toes facing adversary
