Texas Fire Alarm Test Questions with
Accurate Answers
A licensee must carry a pocket license for identification while engaged in the activities of
the business. - ANSWERSTrue
According to NFPA, how often should homeowners replace smoke alarms in 1-2 family
dwellings? - ANSWERS10 years
All fire warning equipment shall be mounted so as to be supported independently of its
attachment to_______. - ANSWERSThe Wires
As a licensed Residential Fire Alarm Technician, you may conduct any of the following
tasks except which? - ANSWERSPlan
Cable used in the fire alarm circuits to ensure continued operation of critical circuits
during a specified time under fire condition is called ______ cable. - ANSWERSCircuit
integrity
Equipment shall be installed in locations where conditions do not exceed the voltage,
temperature, and _______ limits specific in the manufacturer's published instructions. -
ANSWERSHumidity
Fire detection system wiring should be permanent and without a disconnecting switch
other than those required for _______ protection. - ANSWERSOvercurrent
Heat detectors shall have a listed spacing of not less than _____ feet. - ANSWERS50
Heat detectors that have a white color code have a temperature rating of what? -
ANSWERS175-249 degrees Fahrenheit (Intermediate)
Household fire alarm systems shall be programmed by the manufacturer to generate at
least a monthly test of the communication or transmission means. - ANSWERSFalse
If after any service, inspection, or test, a system does not comply with the applicable
codes and standards at the time the system was installed, a completed red label must
be attached to the outside of the control panel cover or, if the system has no panel, in a
permanent location to indicate that corrective action is necessary. - ANSWERSFalse
Notification appliances shall have a sound level at least 15db above the average
ambient sound level or 5db above the maximum sound level. - ANSWERSTrue
Accurate Answers
A licensee must carry a pocket license for identification while engaged in the activities of
the business. - ANSWERSTrue
According to NFPA, how often should homeowners replace smoke alarms in 1-2 family
dwellings? - ANSWERS10 years
All fire warning equipment shall be mounted so as to be supported independently of its
attachment to_______. - ANSWERSThe Wires
As a licensed Residential Fire Alarm Technician, you may conduct any of the following
tasks except which? - ANSWERSPlan
Cable used in the fire alarm circuits to ensure continued operation of critical circuits
during a specified time under fire condition is called ______ cable. - ANSWERSCircuit
integrity
Equipment shall be installed in locations where conditions do not exceed the voltage,
temperature, and _______ limits specific in the manufacturer's published instructions. -
ANSWERSHumidity
Fire detection system wiring should be permanent and without a disconnecting switch
other than those required for _______ protection. - ANSWERSOvercurrent
Heat detectors shall have a listed spacing of not less than _____ feet. - ANSWERS50
Heat detectors that have a white color code have a temperature rating of what? -
ANSWERS175-249 degrees Fahrenheit (Intermediate)
Household fire alarm systems shall be programmed by the manufacturer to generate at
least a monthly test of the communication or transmission means. - ANSWERSFalse
If after any service, inspection, or test, a system does not comply with the applicable
codes and standards at the time the system was installed, a completed red label must
be attached to the outside of the control panel cover or, if the system has no panel, in a
permanent location to indicate that corrective action is necessary. - ANSWERSFalse
Notification appliances shall have a sound level at least 15db above the average
ambient sound level or 5db above the maximum sound level. - ANSWERSTrue
