Microsoft AZ-700 QUESTIONS AND ANSWERS |
VERIFIED AND WELL DETAILED ANSWERS | PLUS
RATIONALES | GUARANTEED PASS | LATEST EXAM
UPDATE | EXAM PREP | STUDY GUIDE | PRACTICE
TEST
Domain 1: Design, Implement, and Manage Hybrid Networking (20 Questions)
,1. You need to connect an on-premises network to Azure using a dedicated private connection that does not
traverse the public internet. What should you use?
- A) Site-to-Site VPN
- B) Point-to-Site VPN
- C) Azure ExpressRoute
- D) Azure Virtual WAN
Answer: C
Rationale: ExpressRoute provides a private, dedicated connection between on-premises networks and Azure
that does not go over the public internet. Site-to-Site and Point-to-Site VPNs use encrypted tunnels over the
public internet. Virtual WAN is a networking service that can use both VPN and ExpressRoute.
2. Which VPN type allows individual clients to connect to an Azure Virtual Network from remote locations?
- A) Site-to-Site (S2S)
- B) Point-to-Site (P2S)
- C) VNet-to-VNet
- D) ExpressRoute
Answer: B
,Rationale: Point-to-Site VPN enables individual client computers to connect to an Azure VNet. Site-to-Site
connects entire on-premises networks. VNet-to-VNet connects Azure VNets to each other. ExpressRoute is a
private dedicated connection.
3. What is the maximum number of ExpressRoute circuits a single ExpressRoute Gateway can support
(UltraPerformance SKU)?
- A) 4
- B) 10
- C) 16
- D) 32
Answer: B
Rationale: The UltraPerformance ExpressRoute gateway SKU supports up to 10 ExpressRoute circuits. Other
SKUs support fewer circuits.
4. Which protocol does ExpressRoute use for route exchange between on-premises and Azure?
- A) OSPF
- B) BGP
- C) RIP
, - D) EIGRP
Answer: B
Rationale: ExpressRoute uses Border Gateway Protocol (BGP) to exchange routes between on-premises
networks and Azure. BGP is the standard routing protocol for ExpressRoute private and Microsoft peering.
5. You need to provide redundancy for an ExpressRoute connection. What should you configure?
- A) Two ExpressRoute circuits in the same peering location
- B) Two ExpressRoute circuits in different peering locations
- C) A Site-to-Site VPN as a backup
- D) All of the above
Answer: D
Rationale: For maximum redundancy, you can use multiple ExpressRoute circuits in different peering locations
and/or a Site-to-Site VPN as a backup path. All options provide redundancy.
6. What is the purpose of ExpressRoute Global Reach?
- A) Connect multiple Azure VNets together
VERIFIED AND WELL DETAILED ANSWERS | PLUS
RATIONALES | GUARANTEED PASS | LATEST EXAM
UPDATE | EXAM PREP | STUDY GUIDE | PRACTICE
TEST
Domain 1: Design, Implement, and Manage Hybrid Networking (20 Questions)
,1. You need to connect an on-premises network to Azure using a dedicated private connection that does not
traverse the public internet. What should you use?
- A) Site-to-Site VPN
- B) Point-to-Site VPN
- C) Azure ExpressRoute
- D) Azure Virtual WAN
Answer: C
Rationale: ExpressRoute provides a private, dedicated connection between on-premises networks and Azure
that does not go over the public internet. Site-to-Site and Point-to-Site VPNs use encrypted tunnels over the
public internet. Virtual WAN is a networking service that can use both VPN and ExpressRoute.
2. Which VPN type allows individual clients to connect to an Azure Virtual Network from remote locations?
- A) Site-to-Site (S2S)
- B) Point-to-Site (P2S)
- C) VNet-to-VNet
- D) ExpressRoute
Answer: B
,Rationale: Point-to-Site VPN enables individual client computers to connect to an Azure VNet. Site-to-Site
connects entire on-premises networks. VNet-to-VNet connects Azure VNets to each other. ExpressRoute is a
private dedicated connection.
3. What is the maximum number of ExpressRoute circuits a single ExpressRoute Gateway can support
(UltraPerformance SKU)?
- A) 4
- B) 10
- C) 16
- D) 32
Answer: B
Rationale: The UltraPerformance ExpressRoute gateway SKU supports up to 10 ExpressRoute circuits. Other
SKUs support fewer circuits.
4. Which protocol does ExpressRoute use for route exchange between on-premises and Azure?
- A) OSPF
- B) BGP
- C) RIP
, - D) EIGRP
Answer: B
Rationale: ExpressRoute uses Border Gateway Protocol (BGP) to exchange routes between on-premises
networks and Azure. BGP is the standard routing protocol for ExpressRoute private and Microsoft peering.
5. You need to provide redundancy for an ExpressRoute connection. What should you configure?
- A) Two ExpressRoute circuits in the same peering location
- B) Two ExpressRoute circuits in different peering locations
- C) A Site-to-Site VPN as a backup
- D) All of the above
Answer: D
Rationale: For maximum redundancy, you can use multiple ExpressRoute circuits in different peering locations
and/or a Site-to-Site VPN as a backup path. All options provide redundancy.
6. What is the purpose of ExpressRoute Global Reach?
- A) Connect multiple Azure VNets together
