Page 1 of 36
CFI-I – CERTIFIED FIRE INSPECTOR 1 EXAM
NEWEST 2026 ACTUAL EXAM QUESTIONS
AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) ALL ANSWERED
{100 Q & A} ALREADY GRADED A+ | BRAND
NEW! | 100% GUARANTEED PASS
1. Class K fires are primarily associated with:
A. Electrical equipment
B. Wood and paper
C. Flammable liquids
D. Cooking oils and fats
2. In which of the following situations should a fire inspector
issue a citation?
A. Minor housekeeping violations
B. Missing exit signs
C. Life safety hazards that endanger occupants
D. Non-critical maintenance issues
Rationale: Enforcement is focused on hazards that directly
affect life safety.
,Page 2 of 36
Rationale: Class K extinguishers are specifically designed
to handle kitchen grease fires safely.
3. Fire-resistive ratings for walls, floors, and ceilings are
expressed in:
A. Inches
B. PSI
C. Hours
D. Degrees Fahrenheit
Rationale: Fire-resistive ratings indicate how long a
construction assembly can withstand fire exposure.
4. Which of the following is an example of a combustible
metal?
A. Wood
B. Plastic
C. Magnesium
D. Paper
Rationale: Combustible metals like magnesium require
special extinguishing agents due to high reactivity.
5. During construction inspections, a fire inspector should
focus on:
A. Only aesthetics
B. Fire barriers, egress, and fire protection systems
C. Interior decorating
D. Landscaping
,Page 3 of 36
Rationale: Fire inspectors ensure that structural fire
protection and egress requirements are met before
occupancy.
6. The most common cause of fires in assembly
occupancies is:
A. Electrical panels
B. Human behavior such as smoking and cooking
C. Structural defects
D. Sprinkler malfunction
Rationale: Assembly fires are most often caused by human
actions rather than system failures.
7. Which type of inspection verifies that new fire
protection systems are installed according to code?
A. Annual inspection
B. Complaint inspection
C. Acceptance inspection
D. Follow-up inspection
Rationale: Acceptance inspections confirm that newly
installed systems meet code requirements before
occupancy.
8. Emergency lighting must provide illumination for a
minimum of:
A. 15 minutes
B. 90 minutes
C. 3 hours
, Page 4 of 36
D. 24 hours
Rationale: NFPA 101 requires 90 minutes of emergency
illumination to ensure safe egress.
9. Fire inspection checklists should be:
A. Written only once
B. Optional
C. Updated regularly to reflect current codes
D. Ignored in small buildings
Rationale: Regular updates ensure inspections reflect the
latest standards and code changes.
10. The NFPA standard that governs portable fire
extinguishers is:
A. NFPA 13
B. NFPA 10
C. NFPA 72
D. NFPA 101
Rationale: NFPA 10 provides requirements for selection,
placement, inspection, and maintenance of portable
extinguishers.
11. Flammable liquid storage must be:
A. Near electrical panels
B. In unlocked cabinets
C. In approved containers with proper ventilation
D. On open shelves
Rationale: Proper storage reduces fire hazards and ensures
CFI-I – CERTIFIED FIRE INSPECTOR 1 EXAM
NEWEST 2026 ACTUAL EXAM QUESTIONS
AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) ALL ANSWERED
{100 Q & A} ALREADY GRADED A+ | BRAND
NEW! | 100% GUARANTEED PASS
1. Class K fires are primarily associated with:
A. Electrical equipment
B. Wood and paper
C. Flammable liquids
D. Cooking oils and fats
2. In which of the following situations should a fire inspector
issue a citation?
A. Minor housekeeping violations
B. Missing exit signs
C. Life safety hazards that endanger occupants
D. Non-critical maintenance issues
Rationale: Enforcement is focused on hazards that directly
affect life safety.
,Page 2 of 36
Rationale: Class K extinguishers are specifically designed
to handle kitchen grease fires safely.
3. Fire-resistive ratings for walls, floors, and ceilings are
expressed in:
A. Inches
B. PSI
C. Hours
D. Degrees Fahrenheit
Rationale: Fire-resistive ratings indicate how long a
construction assembly can withstand fire exposure.
4. Which of the following is an example of a combustible
metal?
A. Wood
B. Plastic
C. Magnesium
D. Paper
Rationale: Combustible metals like magnesium require
special extinguishing agents due to high reactivity.
5. During construction inspections, a fire inspector should
focus on:
A. Only aesthetics
B. Fire barriers, egress, and fire protection systems
C. Interior decorating
D. Landscaping
,Page 3 of 36
Rationale: Fire inspectors ensure that structural fire
protection and egress requirements are met before
occupancy.
6. The most common cause of fires in assembly
occupancies is:
A. Electrical panels
B. Human behavior such as smoking and cooking
C. Structural defects
D. Sprinkler malfunction
Rationale: Assembly fires are most often caused by human
actions rather than system failures.
7. Which type of inspection verifies that new fire
protection systems are installed according to code?
A. Annual inspection
B. Complaint inspection
C. Acceptance inspection
D. Follow-up inspection
Rationale: Acceptance inspections confirm that newly
installed systems meet code requirements before
occupancy.
8. Emergency lighting must provide illumination for a
minimum of:
A. 15 minutes
B. 90 minutes
C. 3 hours
, Page 4 of 36
D. 24 hours
Rationale: NFPA 101 requires 90 minutes of emergency
illumination to ensure safe egress.
9. Fire inspection checklists should be:
A. Written only once
B. Optional
C. Updated regularly to reflect current codes
D. Ignored in small buildings
Rationale: Regular updates ensure inspections reflect the
latest standards and code changes.
10. The NFPA standard that governs portable fire
extinguishers is:
A. NFPA 13
B. NFPA 10
C. NFPA 72
D. NFPA 101
Rationale: NFPA 10 provides requirements for selection,
placement, inspection, and maintenance of portable
extinguishers.
11. Flammable liquid storage must be:
A. Near electrical panels
B. In unlocked cabinets
C. In approved containers with proper ventilation
D. On open shelves
Rationale: Proper storage reduces fire hazards and ensures
