CERTIFICATION EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ASWERS) Q&A 2027
|INSTANT DOWNLOAD PDF
1. What is the primary purpose of a water distribution
system?
A. To collect wastewater
B. To deliver potable water to consumers
C. To treat industrial waste
D. To generate electricity
Rationale: A distribution system conveys treated potable water
from the treatment facility or storage facilities to customers.
Correct answer: B. To deliver potable water to consumers
2. Which component is primarily used to store treated water
in a distribution system?
A. Manhole
B. Reservoir or storage tank
C. Sewer lateral
D. Catch basin
Rationale: Storage tanks and reservoirs provide water storage
and help maintain adequate pressure and supply.
Correct answer: B. Reservoir or storage tank
3. What is the main purpose of maintaining adequate water
pressure?
,A. To increase pipe corrosion
B. To ensure water reaches customers and prevent intrusion
C. To reduce chlorine residual
D. To eliminate all leaks
Rationale: Adequate pressure allows water to reach customers
and helps prevent contaminated water from entering the
system through leaks or openings.
Correct answer: B. To ensure water reaches customers and
prevent intrusion
4. Which device is commonly used to isolate a section of
water main?
A. Gate valve
B. Air compressor
C. Flow meter
D. Pressure gauge
Rationale: Isolation valves such as gate valves allow operators
to shut off specific sections for maintenance or repair.
Correct answer: A. Gate valve
5. What is the primary purpose of a water main?
A. To transport potable water through the distribution system
B. To collect stormwater
C. To transport sewage
D. To dispose of sludge
Rationale: Water mains are the principal pipelines used to
convey potable water through distribution systems.
,Correct answer: A. To transport potable water through the
distribution system
6. Which fitting is used to change the direction of a water
pipeline?
A. Tee
B. Elbow
C. Coupling
D. Reducer
Rationale: An elbow changes the direction of flow in a pipeline.
Correct answer: B. Elbow
7. What is the purpose of a water meter?
A. To measure water consumption
B. To remove bacteria
C. To increase chlorine concentration
D. To reduce pipe pressure
Rationale: Water meters measure the volume of water used by
customers.
Correct answer: A. To measure water consumption
8. Which valve is commonly used to regulate flow?
A. Control valve
B. Check valve
C. Air-release valve
D. Drain valve
, Rationale: Control valves can be adjusted to regulate flow or
pressure within a distribution system.
Correct answer: A. Control valve
9. What is the purpose of a check valve?
A. To increase flow
B. To prevent reverse flow
C. To measure pressure
D. To remove sediment
Rationale: Check valves permit flow in one direction and
prevent backflow.
Correct answer: B. To prevent reverse flow
10. What is water hammer?
A. A chemical treatment process
B. A pressure surge caused by a sudden change in flow
C. A method of pipe cleaning
D. A type of pump
Rationale: Rapidly closing valves or suddenly stopping flow can
create pressure waves known as water hammer.
Correct answer: B. A pressure surge caused by a sudden change
in flow
11. Which action can help reduce water hammer?
A. Closing valves rapidly
B. Closing valves gradually
C. Increasing pipe restrictions
D. Removing all air valves