Comprehensive Coating Inspection: NACE-CIP1- 001 Exam Guide
Questions with Verified Answers (Correct Update)
Question 1: Comprehensive Coating Inspection: NACE-CIP1-
Answer:
Question 2: What is the first preferred course of action if small blisters are noticed in a tank
lining?
Answer: Document the problem and advise the Contractor and Owner's representative.
Question 3: What is dew point?
Answer: The temperature at which condensation occurs.
Question 4: What should a coating inspector perform if a poorly maintained compressor is
used?
Answer: A blotter test for the presence of oil and water.
Question 5: What should an inspector do upon arrival of coating materials?
Answer: Observe and document the amount of material and batch numbers.
Question 6: What is relative humidity?
Answer: A measure of the amount of moisture in the air compared to saturation level.
Question 7: Galvanic corrosion occurs on which substrate?
Answer: Metal.
Question 8: Which specification is most likely referenced when applying Thermal Spray
Coatings?
Answer: SSPC-CS 23.00/AWS C2.23/NACE No. 12.
Question 9: What is the minimum recommended distance for taking a DFT gauge measurement
from an edge?
Answer: 2.5 cm (1 inch).
Page 1
, Question 10: What is polymerization?
Answer: The process of monomers joining together.
Question 11: What is an exposed area of the substrate or previous coat of a conductive coating
material called?
Answer: Holiday.
Question 12: What is checking in coatings?
Answer: A fine crack in the surface of a coating that rarely reaches the substrate.
Question 13: Why is inspection documentation important?
Answer: Owners use the documentation for a variety of purposes.
Question 14: What should an inspector's personal log book contain?
Answer: No comments regarding the application team.
Question 15: What should you do if asked to supervise uncertified inspectors after receiving
NACE CIP Level 1 certification?
Answer: Meet with the prospective employer to determine the scope of your role.
Question 16: What information can good records provide maintenance departments?
Answer: What items were coated.
Question 17: When are Non Conformance Reports completed by the Inspector?
Answer: When the Inspector and Contractor deem it to be a significant non-conforming item.
Question 18: Why is the initial steel condition important to the NACE Inspector?
Answer: The Inspector may have to reject the Steel.
Question 19: What form of corrosion has the largest potential for unexpected catastrophic
failure?
Answer: Localized Corrosion.
Page 2
Questions with Verified Answers (Correct Update)
Question 1: Comprehensive Coating Inspection: NACE-CIP1-
Answer:
Question 2: What is the first preferred course of action if small blisters are noticed in a tank
lining?
Answer: Document the problem and advise the Contractor and Owner's representative.
Question 3: What is dew point?
Answer: The temperature at which condensation occurs.
Question 4: What should a coating inspector perform if a poorly maintained compressor is
used?
Answer: A blotter test for the presence of oil and water.
Question 5: What should an inspector do upon arrival of coating materials?
Answer: Observe and document the amount of material and batch numbers.
Question 6: What is relative humidity?
Answer: A measure of the amount of moisture in the air compared to saturation level.
Question 7: Galvanic corrosion occurs on which substrate?
Answer: Metal.
Question 8: Which specification is most likely referenced when applying Thermal Spray
Coatings?
Answer: SSPC-CS 23.00/AWS C2.23/NACE No. 12.
Question 9: What is the minimum recommended distance for taking a DFT gauge measurement
from an edge?
Answer: 2.5 cm (1 inch).
Page 1
, Question 10: What is polymerization?
Answer: The process of monomers joining together.
Question 11: What is an exposed area of the substrate or previous coat of a conductive coating
material called?
Answer: Holiday.
Question 12: What is checking in coatings?
Answer: A fine crack in the surface of a coating that rarely reaches the substrate.
Question 13: Why is inspection documentation important?
Answer: Owners use the documentation for a variety of purposes.
Question 14: What should an inspector's personal log book contain?
Answer: No comments regarding the application team.
Question 15: What should you do if asked to supervise uncertified inspectors after receiving
NACE CIP Level 1 certification?
Answer: Meet with the prospective employer to determine the scope of your role.
Question 16: What information can good records provide maintenance departments?
Answer: What items were coated.
Question 17: When are Non Conformance Reports completed by the Inspector?
Answer: When the Inspector and Contractor deem it to be a significant non-conforming item.
Question 18: Why is the initial steel condition important to the NACE Inspector?
Answer: The Inspector may have to reject the Steel.
Question 19: What form of corrosion has the largest potential for unexpected catastrophic
failure?
Answer: Localized Corrosion.
Page 2
