s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
Lecture Exams
1. What three elements are used in an autoclave to sterilize equipment?
heat, pressure, and steam
2. What is the minimum temperature an autoclave must be set at to achieve sterile condition?
125°C
3. If you are working in a lab in which an autoclave is not available, and you are pressed for time, which would you chose to
best sterilize your equipment? Hot steam or hot air? Explain why you chose your answer.
Hot steam is the best choice as you can achieve a sterile environment in a matter of minutes whereas hot air will
take several hours to achieve the same effect.
4. What type of incubator is pictured below?
Fixed incubator
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
,s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
,s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
Answer the following questions.
1. At what temperature is the fixed incubator set to, as presented in the lab video?
37°C
2. At what temperature should you refrigerate bacterial samples? Explain why this is beneficial.
4°C. This temperature slows bacterial growth and prolongs the life of the sample.
3. What are the FOUR types of gloves presented in the lab video?
Latex, Nitrile, Thermal cold, Thermal heat
4. What THREE rules were discussed in regards to lab safety that would protect you and others from contamination?
1. Never eat or drink in the lab
2. Always wear appropriate PPE
3. Never leave the lab wearing PPE
5. What are the main sections that should be found in a lab notebook? Name at least 4.
Objective, Procedure, Notes, Results and Deviations
Answer the following questions.
1. You are a lab instructor and Paul Smith has turned in his lab notebook for you to grade the lab experiment #2 on
microscopy. Based upon what was covered in the lab video, how should Paul have entitled his lab experiment?
PS02 Microscopy
2. You arrive to your first day of work at a new lab. You are taking over for someone who took a new job at another lab. Your
boss informs you that because of time restraints, this person did not exactly follow the experimental protocol. In order to
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
,s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
proceed, you must know what he did differently. (1) According to the lab lecture, under what section of his notebook would
you look to find the experimental steps? (2) As changes to the experimental steps were made, what are these differences
called and how should it appear in the lab notebook?
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
https://www.stuvia.com/user/allatopnotchPage
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
Lecture Exams
1. What three elements are used in an autoclave to sterilize equipment?
heat, pressure, and steam
2. What is the minimum temperature an autoclave must be set at to achieve sterile condition?
125°C
3. If you are working in a lab in which an autoclave is not available, and you are pressed for time, which would you chose to
best sterilize your equipment? Hot steam or hot air? Explain why you chose your answer.
Hot steam is the best choice as you can achieve a sterile environment in a matter of minutes whereas hot air will
take several hours to achieve the same effect.
4. What type of incubator is pictured below?
Fixed incubator
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
1 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
,s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
2 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
,s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
Answer the following questions.
1. At what temperature is the fixed incubator set to, as presented in the lab video?
37°C
2. At what temperature should you refrigerate bacterial samples? Explain why this is beneficial.
4°C. This temperature slows bacterial growth and prolongs the life of the sample.
3. What are the FOUR types of gloves presented in the lab video?
Latex, Nitrile, Thermal cold, Thermal heat
4. What THREE rules were discussed in regards to lab safety that would protect you and others from contamination?
1. Never eat or drink in the lab
2. Always wear appropriate PPE
3. Never leave the lab wearing PPE
5. What are the main sections that should be found in a lab notebook? Name at least 4.
Objective, Procedure, Notes, Results and Deviations
Answer the following questions.
1. You are a lab instructor and Paul Smith has turned in his lab notebook for you to grade the lab experiment #2 on
microscopy. Based upon what was covered in the lab video, how should Paul have entitled his lab experiment?
PS02 Microscopy
2. You arrive to your first day of work at a new lab. You are taking over for someone who took a new job at another lab. Your
boss informs you that because of time restraints, this person did not exactly follow the experimental protocol. In order to
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
3 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
,s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
BIOD 171 Lab Exams 1-8 Complete latest
BIOD 171 Lab Exams 1-8 Complete latest
BBIOD 171 Lab Exams 1-8 Complete latest
IOD 171 Lab Exams 1-8 Complete latest
proceed, you must know what he did differently. (1) According to the lab lecture, under what section of his notebook would
you look to find the experimental steps? (2) As changes to the experimental steps were made, what are these differences
called and how should it appear in the lab notebook?
s://www.stuvia.com/user/allatopnotchPage
https://www.stuvia.com/user/allatopnotchPage
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopnotch
4 of 32https://www.stuvia.com/user/allatopnotchhttps://www.stuvia.com/user/allatopn
