FDOT Concrete Batch Plant Operator Exam 2026–2027
Practice Test Bank with Verified Answers & Detailed
Rationales
Section 1: General Production Requirements & Plant
Approval (Questions 1–25)
1. What is the primary function of a concrete batch plant?
A) To transport concrete to the job site
B) To mix and produce concrete in controlled quantities according
to approved mix designs and specifications
C) To test the compressive strength of concrete
D) To cure concrete after placement
,Answer B: — To mix and produce concrete in controlled
quantities according to approved mix designs and
specifications
Rationale: The primary function of a concrete batch plant is to
mix and produce concrete in controlled quantities according to
approved mix designs and specifications. Transportation, testing,
and curing are separate operations performed after batching. ---
2. Which FDOT document lists the concrete plants that are
authorized to produce concrete for state projects?
A) FDOT Concrete Mix Design Manual
B) FDOT Production Facility Listing
C) FDOT Quality Control Handbook
D) FDOT Materials Manual Volume I
Answer B: — FDOT Production Facility Listing
Rationale: The FDOT Production Facility Listing is the official
document that lists all concrete plants authorized to produce
concrete for state projects. Only plants on this list may supply
concrete to FDOT projects. ---
,3. A plant must submit a proposed quality control plan to
which office for initial approval?
A) State Materials Office (SMO)
B) District Materials Office (DMO)
C) Federal Highway Administration (FHWA)
D) Florida Department of Environmental Protection (DEP)
Answer B: — District Materials Office (DMO)
Rationale: A plant must submit a proposed quality control plan to
the District Materials Office (DMO) in accordance with the
specifications. Upon submittal, the DMO will review the plan and
make arrangements for the initial plant qualification review and
inspection. ---
4. How often is an actively producing concrete batch plant re-
inspected by Department personnel?
A) Every month
B) Every three months or as approved
C) Every six months
D) Every year
Answer B: — Every three months or as approved
, Rationale: While the plant is actively supplying concrete to
Department projects, it will be re-inspected by Department
personnel every three months or as approved. If discrepancies are
found during the inspection, the plant may be removed from
approved status and placed in a suspended status. ---
5. What is the purpose of the FDOT Production Facility
Listing?
A) To list all concrete plants in Florida
B) To list plants authorized to produce concrete for FDOT projects
C) To list all concrete mix designs
D) To list all concrete testing laboratories
Answer B: — To list plants authorized to produce concrete for
FDOT projects
Rationale: The FDOT Production Facility Listing identifies plants
that have met the Department's requirements and are authorized
to produce concrete for state projects. ---
6. What does CTQP stand for?
A) Concrete Testing and Qualification Program
Practice Test Bank with Verified Answers & Detailed
Rationales
Section 1: General Production Requirements & Plant
Approval (Questions 1–25)
1. What is the primary function of a concrete batch plant?
A) To transport concrete to the job site
B) To mix and produce concrete in controlled quantities according
to approved mix designs and specifications
C) To test the compressive strength of concrete
D) To cure concrete after placement
,Answer B: — To mix and produce concrete in controlled
quantities according to approved mix designs and
specifications
Rationale: The primary function of a concrete batch plant is to
mix and produce concrete in controlled quantities according to
approved mix designs and specifications. Transportation, testing,
and curing are separate operations performed after batching. ---
2. Which FDOT document lists the concrete plants that are
authorized to produce concrete for state projects?
A) FDOT Concrete Mix Design Manual
B) FDOT Production Facility Listing
C) FDOT Quality Control Handbook
D) FDOT Materials Manual Volume I
Answer B: — FDOT Production Facility Listing
Rationale: The FDOT Production Facility Listing is the official
document that lists all concrete plants authorized to produce
concrete for state projects. Only plants on this list may supply
concrete to FDOT projects. ---
,3. A plant must submit a proposed quality control plan to
which office for initial approval?
A) State Materials Office (SMO)
B) District Materials Office (DMO)
C) Federal Highway Administration (FHWA)
D) Florida Department of Environmental Protection (DEP)
Answer B: — District Materials Office (DMO)
Rationale: A plant must submit a proposed quality control plan to
the District Materials Office (DMO) in accordance with the
specifications. Upon submittal, the DMO will review the plan and
make arrangements for the initial plant qualification review and
inspection. ---
4. How often is an actively producing concrete batch plant re-
inspected by Department personnel?
A) Every month
B) Every three months or as approved
C) Every six months
D) Every year
Answer B: — Every three months or as approved
, Rationale: While the plant is actively supplying concrete to
Department projects, it will be re-inspected by Department
personnel every three months or as approved. If discrepancies are
found during the inspection, the plant may be removed from
approved status and placed in a suspended status. ---
5. What is the purpose of the FDOT Production Facility
Listing?
A) To list all concrete plants in Florida
B) To list plants authorized to produce concrete for FDOT projects
C) To list all concrete mix designs
D) To list all concrete testing laboratories
Answer B: — To list plants authorized to produce concrete for
FDOT projects
Rationale: The FDOT Production Facility Listing identifies plants
that have met the Department's requirements and are authorized
to produce concrete for state projects. ---
6. What does CTQP stand for?
A) Concrete Testing and Qualification Program
