Oklahoma Locksmith
Licensing Exam Ultimate
Test Bank | OK DOL,
NFPA, IBC & UL 294 (Elite
Q&A)
TABLE OF CONTENTS
● PART I: THE PREVIEW
● PART II: THE ELITE TEST BANK
○ Tier 1: Foundational Syntax & Application (Questions 1–18)
○ Tier 2: Complex Application & Simulation (Questions 19–37)
○ Tier 3: Grandmaster Synthesis (Questions 38–55)
PART I: THE PREVIEW
Mastering this test bank guarantees absolute fluency in life safety codes, physical security
integration, and state licensure compliance. The cognitive forging provided here directly
translates to flawless execution in elite locksmithing, access control architecture, and regulatory
navigation.
The Critical Axioms Cheat Sheet
Regulatory Framework Core Axiom Structural Limitation & Protocol
OAC 380:75 The 14/30 Manager Mandate A company must notify the DOL
within 14 days of a manager's
departure and designate a
licensed replacement within 30
days.
NFPA 80 Fire Door Tolerances Maximum 3/4 inch bottom
undercut; Maximum 1/8 inch
perimeter for wood, 3/16 inch
for steel.
,Regulatory Framework Core Axiom Structural Limitation & Protocol
NFPA 101 Delayed Egress Sequence Strictly 15 lbf of pressure
applied for 3 continuous
seconds initiates an irreversible
15-second unlocking delay.
UL 294 Line Security Hierarchy Level I: Shorts/Opens. Level II:
Substitution attacks. Level III:
Cryptographic encryption
(OSDP).
SFIC A2 The 23 Constant The stack total (Bottom +
Master + Control + Top) is 23.
The control shear line is
mathematically Base Cut + 10.
PART II: THE ELITE TEST BANK
Tier 1: Foundational Syntax & Application
Q1: An Oklahoma locksmith company hires four new apprentices to assist a single licensed
technician on a large commercial master keying project. Based on the principles of the
Oklahoma Administrative Code (OAC 380:75), which action is the FIRST compliance violation
occurring in this scenario?
A) The apprentices were not immediately registered with the OSBI prior to stepping on the job
site. B) The company failed to pay the $250 company licensing fee for the additional personnel.
C) The ratio of trainees to the licensed technician exceeds the statutory maximum limit. D) The
apprentices are prohibited from handling master key data without a manager present.
● Answer: C (The ratio of trainees to the licensed technician exceeds the statutory
maximum limit.)
● Distractor Analysis:
○ A is incorrect: Trainees have 15 business days to submit an application to the DOL
after being hired; immediate OSBI registration before stepping on site is a common
misunderstanding of the grace period.
○ B is incorrect: The $250 fee applies to the company license itself, not individual
trainee additions, which are $75 for a new application.
○ D is incorrect: While security protocol dictates restricted access to master key data,
the immediate regulatory violation is the physical ratio of personnel.
The Mentor's Analysis: OK DOL strictly caps supervision ratios to prevent the dilution of
oversight in critical security tasks. This mandate ensures that unlicensed apprentices receive
adequate instruction without compromising the integrity of the life safety systems they
manipulate. When facing personnel allocation, the immediate priority is maintaining the 3-to-1
maximum trainee-to-technician ratio per job site. By utilizing strict roster controls, you bypass
the common trap of accidental regulatory citations during rapid commercial expansion.
Professional Intuition: Never dispatch more than three trainees per licensed technician or
manager to any single job site.
Q2: A facility manager requests the installation of a delayed-egress magnetic lock on a
perimeter door. Based on the principles of NFPA 101 (Life Safety Code), which initiation
sequence is the ONLY permissible default configuration for the hardware?
, A) A 15 lbf applied for 1 second initiates an irreversible 30-second delay. B) A 15 lbf applied for
3 seconds initiates a reversible 15-second delay. C) A 15 lbf applied for 3 continuous seconds
initiates an irreversible 15-second delay. D) A 5 lbf applied for 3 seconds initiates an irreversible
15-second delay.
● Answer: C (A 15 lbf applied for 3 continuous seconds initiates an irreversible 15-second
delay.)
● Distractor Analysis:
○ A is incorrect: The 1-second initiation is a legacy rule from older codes, and a
30-second delay requires specific local AHJ approval rather than being the default
setting.
○ B is incorrect: The countdown sequence must be completely irreversible once the
3-second continuous force threshold is met.
○ D is incorrect: 5 lbf is the maximum force for standard ADA interior door operation,
not the force required to trigger a delayed egress mechanism, which demands 15
lbf.
The Mentor's Analysis: Life safety codes prioritize predictable, universal human factors during
panic events, balancing the need to prevent casual nuisance alarms against the absolute
necessity of egress during a crisis. When facing delayed egress deployment, the immediate
priority is ensuring the 15 lbf / 3-second / 15-second irreversible sequence is strictly
programmed. By utilizing current NFPA 101 parameters, you bypass the common trap of using
outdated 1-second nuisance delays that cause massive operational friction. Professional
Intuition: Delayed egress is always 15 pounds, 3 seconds, 15 seconds, and completely
irreversible.
Q3: You are calculating the pin stack for a Best SFIC A2 core. The control key cut is 4. The
operating key cut is 6. Based on the principles of A2 System Mathematics, what is the
REQUIRED size of the control pin?
A) 8 B) 10 C) 4 D) 14
● Answer: A (8)
● Distractor Analysis:
○ B is incorrect: 10 is the universal mathematical constant added to the control cut,
not the final calculated pin size.
○ C is incorrect: 4 is merely the control cut depth; it fails to account for the physical
bottom pin already occupying the chamber.
○ D is incorrect: 14 is the theoretical absolute control shear line (Control cut 4 + 10),
but this raw figure fails to subtract the bottom pin (6) that occupies the space below
it.
The Mentor's Analysis: SFIC mathematics rely on stacked, interconnected shear lines where
every pin relies on the dimensions of the pin beneath it. To find the control pin, you must isolate
the space between the operating shear line and the control shear line. When facing control pin
calculation, the immediate priority is the formula: (Control Cut + 10) - (Bottom Pin + Master Pin).
By utilizing the math (4 + 10 = 14; 14 - 6 = 8), you bypass the common trap of forgetting to
subtract the pins already sitting below the control shear line. Professional Intuition: The
control pin is always (Control Cut + 10) minus everything below it.
Q4: An Oklahoma locksmith technician arrives to rekey a commercial building and realizes they
left their physical OK DOL license card at home, though their state driver's license is in their
wallet. Based on the principles of OAC 380:75 Enforcement, what is the MOST LIKELY
administrative consequence if inspected?
A) Immediate revocation of the technician's license for negligence. B) A $50 fine for an
Licensing Exam Ultimate
Test Bank | OK DOL,
NFPA, IBC & UL 294 (Elite
Q&A)
TABLE OF CONTENTS
● PART I: THE PREVIEW
● PART II: THE ELITE TEST BANK
○ Tier 1: Foundational Syntax & Application (Questions 1–18)
○ Tier 2: Complex Application & Simulation (Questions 19–37)
○ Tier 3: Grandmaster Synthesis (Questions 38–55)
PART I: THE PREVIEW
Mastering this test bank guarantees absolute fluency in life safety codes, physical security
integration, and state licensure compliance. The cognitive forging provided here directly
translates to flawless execution in elite locksmithing, access control architecture, and regulatory
navigation.
The Critical Axioms Cheat Sheet
Regulatory Framework Core Axiom Structural Limitation & Protocol
OAC 380:75 The 14/30 Manager Mandate A company must notify the DOL
within 14 days of a manager's
departure and designate a
licensed replacement within 30
days.
NFPA 80 Fire Door Tolerances Maximum 3/4 inch bottom
undercut; Maximum 1/8 inch
perimeter for wood, 3/16 inch
for steel.
,Regulatory Framework Core Axiom Structural Limitation & Protocol
NFPA 101 Delayed Egress Sequence Strictly 15 lbf of pressure
applied for 3 continuous
seconds initiates an irreversible
15-second unlocking delay.
UL 294 Line Security Hierarchy Level I: Shorts/Opens. Level II:
Substitution attacks. Level III:
Cryptographic encryption
(OSDP).
SFIC A2 The 23 Constant The stack total (Bottom +
Master + Control + Top) is 23.
The control shear line is
mathematically Base Cut + 10.
PART II: THE ELITE TEST BANK
Tier 1: Foundational Syntax & Application
Q1: An Oklahoma locksmith company hires four new apprentices to assist a single licensed
technician on a large commercial master keying project. Based on the principles of the
Oklahoma Administrative Code (OAC 380:75), which action is the FIRST compliance violation
occurring in this scenario?
A) The apprentices were not immediately registered with the OSBI prior to stepping on the job
site. B) The company failed to pay the $250 company licensing fee for the additional personnel.
C) The ratio of trainees to the licensed technician exceeds the statutory maximum limit. D) The
apprentices are prohibited from handling master key data without a manager present.
● Answer: C (The ratio of trainees to the licensed technician exceeds the statutory
maximum limit.)
● Distractor Analysis:
○ A is incorrect: Trainees have 15 business days to submit an application to the DOL
after being hired; immediate OSBI registration before stepping on site is a common
misunderstanding of the grace period.
○ B is incorrect: The $250 fee applies to the company license itself, not individual
trainee additions, which are $75 for a new application.
○ D is incorrect: While security protocol dictates restricted access to master key data,
the immediate regulatory violation is the physical ratio of personnel.
The Mentor's Analysis: OK DOL strictly caps supervision ratios to prevent the dilution of
oversight in critical security tasks. This mandate ensures that unlicensed apprentices receive
adequate instruction without compromising the integrity of the life safety systems they
manipulate. When facing personnel allocation, the immediate priority is maintaining the 3-to-1
maximum trainee-to-technician ratio per job site. By utilizing strict roster controls, you bypass
the common trap of accidental regulatory citations during rapid commercial expansion.
Professional Intuition: Never dispatch more than three trainees per licensed technician or
manager to any single job site.
Q2: A facility manager requests the installation of a delayed-egress magnetic lock on a
perimeter door. Based on the principles of NFPA 101 (Life Safety Code), which initiation
sequence is the ONLY permissible default configuration for the hardware?
, A) A 15 lbf applied for 1 second initiates an irreversible 30-second delay. B) A 15 lbf applied for
3 seconds initiates a reversible 15-second delay. C) A 15 lbf applied for 3 continuous seconds
initiates an irreversible 15-second delay. D) A 5 lbf applied for 3 seconds initiates an irreversible
15-second delay.
● Answer: C (A 15 lbf applied for 3 continuous seconds initiates an irreversible 15-second
delay.)
● Distractor Analysis:
○ A is incorrect: The 1-second initiation is a legacy rule from older codes, and a
30-second delay requires specific local AHJ approval rather than being the default
setting.
○ B is incorrect: The countdown sequence must be completely irreversible once the
3-second continuous force threshold is met.
○ D is incorrect: 5 lbf is the maximum force for standard ADA interior door operation,
not the force required to trigger a delayed egress mechanism, which demands 15
lbf.
The Mentor's Analysis: Life safety codes prioritize predictable, universal human factors during
panic events, balancing the need to prevent casual nuisance alarms against the absolute
necessity of egress during a crisis. When facing delayed egress deployment, the immediate
priority is ensuring the 15 lbf / 3-second / 15-second irreversible sequence is strictly
programmed. By utilizing current NFPA 101 parameters, you bypass the common trap of using
outdated 1-second nuisance delays that cause massive operational friction. Professional
Intuition: Delayed egress is always 15 pounds, 3 seconds, 15 seconds, and completely
irreversible.
Q3: You are calculating the pin stack for a Best SFIC A2 core. The control key cut is 4. The
operating key cut is 6. Based on the principles of A2 System Mathematics, what is the
REQUIRED size of the control pin?
A) 8 B) 10 C) 4 D) 14
● Answer: A (8)
● Distractor Analysis:
○ B is incorrect: 10 is the universal mathematical constant added to the control cut,
not the final calculated pin size.
○ C is incorrect: 4 is merely the control cut depth; it fails to account for the physical
bottom pin already occupying the chamber.
○ D is incorrect: 14 is the theoretical absolute control shear line (Control cut 4 + 10),
but this raw figure fails to subtract the bottom pin (6) that occupies the space below
it.
The Mentor's Analysis: SFIC mathematics rely on stacked, interconnected shear lines where
every pin relies on the dimensions of the pin beneath it. To find the control pin, you must isolate
the space between the operating shear line and the control shear line. When facing control pin
calculation, the immediate priority is the formula: (Control Cut + 10) - (Bottom Pin + Master Pin).
By utilizing the math (4 + 10 = 14; 14 - 6 = 8), you bypass the common trap of forgetting to
subtract the pins already sitting below the control shear line. Professional Intuition: The
control pin is always (Control Cut + 10) minus everything below it.
Q4: An Oklahoma locksmith technician arrives to rekey a commercial building and realizes they
left their physical OK DOL license card at home, though their state driver's license is in their
wallet. Based on the principles of OAC 380:75 Enforcement, what is the MOST LIKELY
administrative consequence if inspected?
A) Immediate revocation of the technician's license for negligence. B) A $50 fine for an
