CAD 100 COMPREHENSIVE EXAMS UPDATED
QUESTIONS AND ANSWERS SURE A+
✔✔What does the acronym CAGE stand for?
A. Commercial and Governing Equity
B. Commercial and Government Entity
C. Center for American Geometric Expression
D. Classification and Gauge Error - ✔✔B. Commercial and Government Entity
✔✔The ____ block lists the assembly or subassembly in which the part or assembly is
used.
A. revision history
B. materials
C. angle of projection
D. application - ✔✔D. application
✔✔Which of the following is not typically included in a basic parts list?
A. Find number
B. Quantity required
C. Part nomenclature
D. Finish - ✔✔D. Finish
,✔✔____ is the left-to-right measurement of an object from the vantage point of the front
view.
A. Length
B. Width
C. Height
D. Depth - ✔✔B. Width
✔✔A flat surface that is inclined to all three principal projection planes is known as a(n)
____ surface.
A. foreshortened
B. oblique
C. inclined
D. normal - ✔✔B. oblique
✔✔Which of the following is not one of the three meanings a line in a multiview drawing
can have?
A. Edge view of a flat surface
B. Intersection edge between two flat surfaces
C. Curved surface tangent to a flat surface
D. Maximum contour of a curved surface - ✔✔C. Curved surface tangent to a flat
surface
✔✔____ is a system wherein parallel lines are used to project the points of a 3D object
onto a 2D projection
plane.
A. Spatial visualization
B. Multiview arrangement
C. Pictorial projection
D. Orthographic projection - ✔✔D. Orthographic projection
✔✔In first-angle projection, the views are projected ____ the viewer and onto the
planes.
A. away from
B. to the left of
C. toward
D. to the right of - ✔✔C. toward
✔✔Numbering the ____ of an object with numerals can aid in learning how to visualize
an object from a
multiview drawing.
A. edges
B. faces
C. surfaces
D. corners - ✔✔D. corners
, ✔✔With respect to computer-generated views, which of the following would likely
require a drafter's review
before the drawing is considered finalized?
A. Creating hidden lines
B. Manipulating center lines to have short dashes or a plus at the center
C. Moving visible lines to match updates made to the model after the view was created
D. Adding fillets and rounds - ✔✔B. Manipulating center lines to have short dashes or a
plus at the center
✔✔There is only one arrowhead on the cutting-plane line for a ____ section view.
A. half
B. offset
C. full
D. broken-out - ✔✔A. Half
✔✔A(n) ____ section is drawn when the essential internal details do not appear on one
flat plane through the
object.
A. offset
B. removed
C. revolved
D. broken-out - ✔✔C. revolved - piece of object is cut out to show internal details
✔✔A cylindrical object with an odd number of features is best described with a(n) ____
section.
A. revolved
B. removed
C. offset
D. aligned - ✔✔D. aligned - cutting plane line rotated along the center
✔✔A(n) ____ section is created when a small portion of a part is exposed to show the
interior construction.
A. half
B. aligned
C. broken-out
D. full - ✔✔C. broken-out
✔✔In a(n) ____ section, the part may be broken on each side of the section to further
clarify the view.
A. broken-out
B. revolved
C. aligned
D. removed - ✔✔B. revolved - piece of object is cut out to show internal details
QUESTIONS AND ANSWERS SURE A+
✔✔What does the acronym CAGE stand for?
A. Commercial and Governing Equity
B. Commercial and Government Entity
C. Center for American Geometric Expression
D. Classification and Gauge Error - ✔✔B. Commercial and Government Entity
✔✔The ____ block lists the assembly or subassembly in which the part or assembly is
used.
A. revision history
B. materials
C. angle of projection
D. application - ✔✔D. application
✔✔Which of the following is not typically included in a basic parts list?
A. Find number
B. Quantity required
C. Part nomenclature
D. Finish - ✔✔D. Finish
,✔✔____ is the left-to-right measurement of an object from the vantage point of the front
view.
A. Length
B. Width
C. Height
D. Depth - ✔✔B. Width
✔✔A flat surface that is inclined to all three principal projection planes is known as a(n)
____ surface.
A. foreshortened
B. oblique
C. inclined
D. normal - ✔✔B. oblique
✔✔Which of the following is not one of the three meanings a line in a multiview drawing
can have?
A. Edge view of a flat surface
B. Intersection edge between two flat surfaces
C. Curved surface tangent to a flat surface
D. Maximum contour of a curved surface - ✔✔C. Curved surface tangent to a flat
surface
✔✔____ is a system wherein parallel lines are used to project the points of a 3D object
onto a 2D projection
plane.
A. Spatial visualization
B. Multiview arrangement
C. Pictorial projection
D. Orthographic projection - ✔✔D. Orthographic projection
✔✔In first-angle projection, the views are projected ____ the viewer and onto the
planes.
A. away from
B. to the left of
C. toward
D. to the right of - ✔✔C. toward
✔✔Numbering the ____ of an object with numerals can aid in learning how to visualize
an object from a
multiview drawing.
A. edges
B. faces
C. surfaces
D. corners - ✔✔D. corners
, ✔✔With respect to computer-generated views, which of the following would likely
require a drafter's review
before the drawing is considered finalized?
A. Creating hidden lines
B. Manipulating center lines to have short dashes or a plus at the center
C. Moving visible lines to match updates made to the model after the view was created
D. Adding fillets and rounds - ✔✔B. Manipulating center lines to have short dashes or a
plus at the center
✔✔There is only one arrowhead on the cutting-plane line for a ____ section view.
A. half
B. offset
C. full
D. broken-out - ✔✔A. Half
✔✔A(n) ____ section is drawn when the essential internal details do not appear on one
flat plane through the
object.
A. offset
B. removed
C. revolved
D. broken-out - ✔✔C. revolved - piece of object is cut out to show internal details
✔✔A cylindrical object with an odd number of features is best described with a(n) ____
section.
A. revolved
B. removed
C. offset
D. aligned - ✔✔D. aligned - cutting plane line rotated along the center
✔✔A(n) ____ section is created when a small portion of a part is exposed to show the
interior construction.
A. half
B. aligned
C. broken-out
D. full - ✔✔C. broken-out
✔✔In a(n) ____ section, the part may be broken on each side of the section to further
clarify the view.
A. broken-out
B. revolved
C. aligned
D. removed - ✔✔B. revolved - piece of object is cut out to show internal details
