Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Masonry ICC
Save
Terms in this set (179)
According to the IBC, rebar larger Larger than #9 must be spliced by mechanical
than #9 must be splices with what couplers
type of splice?
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
,Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Adjustable ties for expandable One tie every 1.77 ft
masonry systems must have Cannot be spaced apart more than 16 inches
horizontally or vertically
Max clearance between connecting parts of
the ties is 1/16th inch
All lap splices must be a minimum 12"
of how many inches in length
Anchor bolts larger than what inch 1/4 inch
in diameter must be embedded in
grout?
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
,Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Anchor bolts that are equal to or 1/4 inch
less than what inch diameter can
be embedded in either mortar or
grout
ASTM A951 requires that One set of 2 deformations around the
longitudinal bars be deformed perimeter of the wire at a maximum spacing of
and have.... 0.7 times the wire diameter but not less than 8
sets per 1 inch of wire length.
A bed joint between flashing and -1/2 inch and +1/8 inch
masonry has a thickness tolerance
of how much?
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
, Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Can you add more water to Yes, but not after 2 1/2 hours
mortar mix
Clean outs for masonry walls must 3 inches wide and 3 inches tall
be at least how big
Clean outs must be provided When the grout pour height exceeds 5'4"
when a grout pour height exceeds
how tall
Cold weather practices must be 40°F
implemented when temperatures
fall below
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Masonry ICC
Save
Terms in this set (179)
According to the IBC, rebar larger Larger than #9 must be spliced by mechanical
than #9 must be splices with what couplers
type of splice?
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
,Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Adjustable ties for expandable One tie every 1.77 ft
masonry systems must have Cannot be spaced apart more than 16 inches
horizontally or vertically
Max clearance between connecting parts of
the ties is 1/16th inch
All lap splices must be a minimum 12"
of how many inches in length
Anchor bolts larger than what inch 1/4 inch
in diameter must be embedded in
grout?
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
,Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Anchor bolts that are equal to or 1/4 inch
less than what inch diameter can
be embedded in either mortar or
grout
ASTM A951 requires that One set of 2 deformations around the
longitudinal bars be deformed perimeter of the wire at a maximum spacing of
and have.... 0.7 times the wire diameter but not less than 8
sets per 1 inch of wire length.
A bed joint between flashing and -1/2 inch and +1/8 inch
masonry has a thickness tolerance
of how much?
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
, Masonry ICC.pdf(questions & answers).!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
Can you add more water to Yes, but not after 2 1/2 hours
mortar mix
Clean outs for masonry walls must 3 inches wide and 3 inches tall
be at least how big
Clean outs must be provided When the grout pour height exceeds 5'4"
when a grout pour height exceeds
how tall
Cold weather practices must be 40°F
implemented when temperatures
fall below
(questions & answers).!!!(questions & answers).!!!!! (questions & answers).!!!! Masonry ICC.pdf(questions & answers).!!!!
