AMPP CIP LEVEL 1 ACTUAL FINALS ANSWERS AND
QUESTIONS SET A+
✔✔Solvent - ✔✔Liquid that dissolve, solid resins
✔✔Pigment - ✔✔Hide the substrate, provides decorative color, enhances desired
properties
✔✔additives - ✔✔Special purpose ingredients used to enhance the performance
✔✔vehicle - ✔✔Liquid portion of the coating
✔✔What is the maximum percent that relative humidity can be? - ✔✔85%
✔✔What is the minimum difference that the surface temperature can be from the
dewpoint? - ✔✔5°F
✔✔High humidity in the air during coding application can cause what? - ✔✔Solvent
entrapment
✔✔Surface preparation definition - ✔✔The process of cleaning and roughing a
substrate before a coating is applied
✔✔Mill scale definition - ✔✔A black or dark blue oxide layer that can be tightly or
loosely adherent
✔✔ISO 8501-1 - ✔✔Is a pictorial standard that combines hand/power tool cleaning and
abrasive blasting in the same standard
✔✔SSPC-SP 3 - ✔✔power tool cleaning
✔✔SSPC-VIS 1 - ✔✔Dry abrasive blasting
, ✔✔SSPC-Guide 12 - ✔✔Guide for illumination of industrial painting projects
✔✔SSPC-SP 1 - ✔✔Solvent Cleaning of visible contaminants
✔✔ISO 8504-3 - ✔✔Solvent Cleaning
- Removal of both visible & non-visible contaminants.
- Should be followed by a rinse with potable ( tap ) water.
✔✔What methods can remove soluble salts? - ✔✔Pressure washing and water jetting
✔✔Power tools are not intended to remove what? - ✔✔Mill scale, rust or paint
✔✔SSPC - SP2 - ✔✔Hand tool cleaning
✔✔SSPC - SP 11 - ✔✔Power tool cleaning to Bear metal
✔✔SSPC - SP 15 - ✔✔Commercial grade power tool cleaning
✔✔Which power tool cleaning standard requires a one mil surface profile - ✔✔SSPC -
SP 15
✔✔How large is a unit area when inspecting for staining - ✔✔9 inches
✔✔Abrasive regulator valve - ✔✔Controls the amount of embrace of being fed into the
airstream
✔✔Main air inlet valve - ✔✔Starts and stops the abrasive blast operation
✔✔Air compressor - ✔✔Supplies air through a hose at high speed and volume
✔✔Dryer - ✔✔Removes moisture from the compressed air
✔✔Blast pot - ✔✔Mixes abrasive with compressed air
✔✔CO monitor - ✔✔Detect carbon monoxide
✔✔Blast hose - ✔✔Carries the abrasive and pressurized air to the nozzle
✔✔SSPC - SP7 - ✔✔Brush off blast cleaning
QUESTIONS SET A+
✔✔Solvent - ✔✔Liquid that dissolve, solid resins
✔✔Pigment - ✔✔Hide the substrate, provides decorative color, enhances desired
properties
✔✔additives - ✔✔Special purpose ingredients used to enhance the performance
✔✔vehicle - ✔✔Liquid portion of the coating
✔✔What is the maximum percent that relative humidity can be? - ✔✔85%
✔✔What is the minimum difference that the surface temperature can be from the
dewpoint? - ✔✔5°F
✔✔High humidity in the air during coding application can cause what? - ✔✔Solvent
entrapment
✔✔Surface preparation definition - ✔✔The process of cleaning and roughing a
substrate before a coating is applied
✔✔Mill scale definition - ✔✔A black or dark blue oxide layer that can be tightly or
loosely adherent
✔✔ISO 8501-1 - ✔✔Is a pictorial standard that combines hand/power tool cleaning and
abrasive blasting in the same standard
✔✔SSPC-SP 3 - ✔✔power tool cleaning
✔✔SSPC-VIS 1 - ✔✔Dry abrasive blasting
, ✔✔SSPC-Guide 12 - ✔✔Guide for illumination of industrial painting projects
✔✔SSPC-SP 1 - ✔✔Solvent Cleaning of visible contaminants
✔✔ISO 8504-3 - ✔✔Solvent Cleaning
- Removal of both visible & non-visible contaminants.
- Should be followed by a rinse with potable ( tap ) water.
✔✔What methods can remove soluble salts? - ✔✔Pressure washing and water jetting
✔✔Power tools are not intended to remove what? - ✔✔Mill scale, rust or paint
✔✔SSPC - SP2 - ✔✔Hand tool cleaning
✔✔SSPC - SP 11 - ✔✔Power tool cleaning to Bear metal
✔✔SSPC - SP 15 - ✔✔Commercial grade power tool cleaning
✔✔Which power tool cleaning standard requires a one mil surface profile - ✔✔SSPC -
SP 15
✔✔How large is a unit area when inspecting for staining - ✔✔9 inches
✔✔Abrasive regulator valve - ✔✔Controls the amount of embrace of being fed into the
airstream
✔✔Main air inlet valve - ✔✔Starts and stops the abrasive blast operation
✔✔Air compressor - ✔✔Supplies air through a hose at high speed and volume
✔✔Dryer - ✔✔Removes moisture from the compressed air
✔✔Blast pot - ✔✔Mixes abrasive with compressed air
✔✔CO monitor - ✔✔Detect carbon monoxide
✔✔Blast hose - ✔✔Carries the abrasive and pressurized air to the nozzle
✔✔SSPC - SP7 - ✔✔Brush off blast cleaning
