Explosive Safety Management
Introduction Certification
TEST Questions and Answers
Verified Solutions Latest Update
Question:
You are assigned to cut the metal banding off pallets of ammo. Which three items in
the SOP are critical to complete the job correctly and safely?
Answer:
Personal protective equipment (PPE) Operational Tools Ammunition peculiar equipment
(APE)
Question:
A driver is scheduled to move 155mm WP projectiles from an on-post, earth-covered
magazine (ECM) to an off-post facility. What unique off-post requirement must he
follow?.
Answer:
Have the correct shipping documents with him
Question:
Which is not a requirement for off-post cargo transportation?.
Answer:
Apply Army storage compatibility rules
Question:
To communicate hazards during transportation, which areas of a vehicle must display
placards?.
Answer:
All four sides of the vehicles
, Question:
According to SOP guidelines, which two types of personnel are authorized to ride in
vehicles that transport A&E?.
Answer:
Military Police Explosive Ordnance Disposal personnel
Question:
You are assigned to transport personnel and small arms ammo (SAA) with
non-explosive bullets in a government sedan. Which three statements are correct?.
Answer:
Seats must be provided for all passengers Vehicles must never be left unattended The
SAA must be properly packaged and secured in the vehicle.
Question:
Which two requirements apply when transporting A&E both on and off post?.
Answer:
Only authorized personnel can be transported in the vehicle Drivers need to know the
type of ammo they are carrying.
Question:
Which process must a qualified, listed ammo inspector follow for residue turn-in?.
Answer:
Inspect the items to make sure they are inert, certify that the items are inert, and
transfer the items to DLA-DS or an inert storage area.
Question:
After inspecting cases of fired cartridges, which document does an inspector use to
certify the scrap brass as safe?.
Answer:
MDAS Certificate
Introduction Certification
TEST Questions and Answers
Verified Solutions Latest Update
Question:
You are assigned to cut the metal banding off pallets of ammo. Which three items in
the SOP are critical to complete the job correctly and safely?
Answer:
Personal protective equipment (PPE) Operational Tools Ammunition peculiar equipment
(APE)
Question:
A driver is scheduled to move 155mm WP projectiles from an on-post, earth-covered
magazine (ECM) to an off-post facility. What unique off-post requirement must he
follow?.
Answer:
Have the correct shipping documents with him
Question:
Which is not a requirement for off-post cargo transportation?.
Answer:
Apply Army storage compatibility rules
Question:
To communicate hazards during transportation, which areas of a vehicle must display
placards?.
Answer:
All four sides of the vehicles
, Question:
According to SOP guidelines, which two types of personnel are authorized to ride in
vehicles that transport A&E?.
Answer:
Military Police Explosive Ordnance Disposal personnel
Question:
You are assigned to transport personnel and small arms ammo (SAA) with
non-explosive bullets in a government sedan. Which three statements are correct?.
Answer:
Seats must be provided for all passengers Vehicles must never be left unattended The
SAA must be properly packaged and secured in the vehicle.
Question:
Which two requirements apply when transporting A&E both on and off post?.
Answer:
Only authorized personnel can be transported in the vehicle Drivers need to know the
type of ammo they are carrying.
Question:
Which process must a qualified, listed ammo inspector follow for residue turn-in?.
Answer:
Inspect the items to make sure they are inert, certify that the items are inert, and
transfer the items to DLA-DS or an inert storage area.
Question:
After inspecting cases of fired cartridges, which document does an inspector use to
certify the scrap brass as safe?.
Answer:
MDAS Certificate