Explosive Management CERT TEST
Questions and
Answers Verified Solutions Latest
Update
Question:
IF A MAGAZINE TEMPERATURE HAS EXCEEDED THE REQUIRED STOWAGE
TEMPERATURE, THE MAGAZINE MUST BE ARTIFICIALLY COOLED AS PRACTICAL, AND AN
ENTRY MADE IN.
Answer:
RED IN THE WEAPONS DEPARTMENT LOG
Question:
WHAT IS THE METHOD FOR REPORTING TRANSACTIONS INVOLVING NAVAL
CONVETIONAL ORDANANCE TRANSMITTED VIA FORMATTED MESSAGE FOR ALL
TRANSACTION TYPES?.
Answer:
AMMUNITION TRANSACTION REPORTS METHOD
Question:
THE PRPV 3/8-INCH SUPPLY AND OPERATING PRESSURE PIPING MUST BE INSTALLED SO
THAT A __________ (MEASURED ON THE HOSE CENTERLINE) CAN BE FORMED BY TWO
FLEXIBLE HOSES.
Answer:
10-INCH (MINIMUM) LOOP
,Question:
WHEN NO BEIN FIRED, DEPLETED URANIUM AMMUNITION PENETRATORS ARE
ENCAPSULATED IN A ________ THAT EFFECTIVELY PROTECTS OPERATING PERSONNEL
FROM CONTACT WIHT THE HEAVY METAL.
Answer:
SABOT
Question:
ONBOARD CV/CVN AND CLF SHIPS WITH LAUNCHERS ON SPONSONS MUST DESIGNATE
______ AS THE MISSILE BLAST AREA.
Answer:
THE SPONSON
Question:
IF AN ORDNANCE ELEVATOR SHOULD SUDDENLY BETWEEN PLATFORMS, THE
OPERATOR SHALL IMMEDIATELY.
Answer:
CALL MAINTENACE PERSONNEL AND OPERATE THE ELEVATOR ONLY AS DIRECTED
Question:
ALL OF THE FOLLOWING ARE TRUE ABOUT SHIPBOARD ARMORIES EXCEPT.
Answer:
THEY MUST BE EQUIPPED WITH A SPRINKLING SYSTEM
Question:
WHICH OF THE FOLLOWING ITEMS IS AN EXAMPLE OF AMMUNITON NO STOWED IN
SMALL ARMS MAGAZINES?.
Answer:
20 MM CLOSE-IN-WEAPONS-SYSTEM (CWIS), HIGH EXPLOSIVE OR INCENDIARY 20MM,
AND LARGER AMMUNITON
,Question:
WHAT IS THE CORRECT SIZE OF THE CONTRASTED ALPHABETICAL LABELS ON
MATERIAL HANLDING EQUIPMENT?.
Answer:
3-INCH BLOCK LETTERS
Question:
KEYS AND LOCKS TO ARMS, AMMUNITION, AND EXPLOSIVE SPACES WILL BE
INVENTORIED SEMI-ANNUALLY AND THE RECORDS KEPT FOR.
Answer:
3 YEARS
Question:
TO ALLOW TIME FOR PLANNING WHEN PREPARING TO OFFLOAD AMMUNITION, SHIPS
SUBMIT AN OFFLOAD PLANNING MESSAGE TO THE OFFLOADING RECEIPT ACTIVITY AT
LEAST HOW MANY DAYS PRIOR TO THE OFFLOAD EVOLUTION?.
Answer:
45 DAYS
Question:
WHAT TYPE OF HIGH TEMPERATURE (F CIRCUIT) THERMOMETERS MUST BE PROPERLY
INSTALLED IN MAGAZINES?.
Answer:
TYPE IC/J 105
Question:
________ WILL NOT BE USED AS TIEDOWN POINTS FOR THE SECURING OF CARGO.
Answer:
PIPES OR PIPING SUPPORTS
, Question:
WHICH OF THE FOLLOWING IS NOT A CERTIFYING AMMUNITION AND EXPLOSIVE WORK
TASK CODE (WTC)?.
Answer:
WTC 3- UNDERWAY REPLENISHMENT
Question:
TEST FITTINGS (NOT INTEGRAL TO THE SPRINKLER VALVE) MUST BE STAMPED WITH
THE.
Answer:
VALVE DAMAGE CONTROL NUMBER
Question:
NO HEAT SENSING DEVICE SHOULD BE INSTALLED MORE THAN _______ FEET (MEASURE
ALONG THE LENGTH OF THE TRANSMISSION TUBING) FROM THE PRPV..
Answer:
50
Question:
EXAMPLES SUCH AS GRENADES, SOUNDING DEVICES, AND SIMILAR ITEMS HAVING
EXPLOSIVE TRAINS WITH LESS THAN TWO EFFECTIVE PROTECTIVE FEATURES, BEST
DESCRIBES COMPATIBILITY GROUB.
Answer:
F
Question:
TO PREVENT THEFT OR LOSS OF MAGAZINE KEYS WHICH COULD PROVIDE
UNAUTHORIZED ACCESS TO BOTH WEAPONS AND AMMUNITON, KEYS TO AMMUNITION
AND EXPLOSIVES SPACES MUST BE KEPT.
Answer:
ON SEPERATE WELDED OR BRAZED RINGS
Questions and
Answers Verified Solutions Latest
Update
Question:
IF A MAGAZINE TEMPERATURE HAS EXCEEDED THE REQUIRED STOWAGE
TEMPERATURE, THE MAGAZINE MUST BE ARTIFICIALLY COOLED AS PRACTICAL, AND AN
ENTRY MADE IN.
Answer:
RED IN THE WEAPONS DEPARTMENT LOG
Question:
WHAT IS THE METHOD FOR REPORTING TRANSACTIONS INVOLVING NAVAL
CONVETIONAL ORDANANCE TRANSMITTED VIA FORMATTED MESSAGE FOR ALL
TRANSACTION TYPES?.
Answer:
AMMUNITION TRANSACTION REPORTS METHOD
Question:
THE PRPV 3/8-INCH SUPPLY AND OPERATING PRESSURE PIPING MUST BE INSTALLED SO
THAT A __________ (MEASURED ON THE HOSE CENTERLINE) CAN BE FORMED BY TWO
FLEXIBLE HOSES.
Answer:
10-INCH (MINIMUM) LOOP
,Question:
WHEN NO BEIN FIRED, DEPLETED URANIUM AMMUNITION PENETRATORS ARE
ENCAPSULATED IN A ________ THAT EFFECTIVELY PROTECTS OPERATING PERSONNEL
FROM CONTACT WIHT THE HEAVY METAL.
Answer:
SABOT
Question:
ONBOARD CV/CVN AND CLF SHIPS WITH LAUNCHERS ON SPONSONS MUST DESIGNATE
______ AS THE MISSILE BLAST AREA.
Answer:
THE SPONSON
Question:
IF AN ORDNANCE ELEVATOR SHOULD SUDDENLY BETWEEN PLATFORMS, THE
OPERATOR SHALL IMMEDIATELY.
Answer:
CALL MAINTENACE PERSONNEL AND OPERATE THE ELEVATOR ONLY AS DIRECTED
Question:
ALL OF THE FOLLOWING ARE TRUE ABOUT SHIPBOARD ARMORIES EXCEPT.
Answer:
THEY MUST BE EQUIPPED WITH A SPRINKLING SYSTEM
Question:
WHICH OF THE FOLLOWING ITEMS IS AN EXAMPLE OF AMMUNITON NO STOWED IN
SMALL ARMS MAGAZINES?.
Answer:
20 MM CLOSE-IN-WEAPONS-SYSTEM (CWIS), HIGH EXPLOSIVE OR INCENDIARY 20MM,
AND LARGER AMMUNITON
,Question:
WHAT IS THE CORRECT SIZE OF THE CONTRASTED ALPHABETICAL LABELS ON
MATERIAL HANLDING EQUIPMENT?.
Answer:
3-INCH BLOCK LETTERS
Question:
KEYS AND LOCKS TO ARMS, AMMUNITION, AND EXPLOSIVE SPACES WILL BE
INVENTORIED SEMI-ANNUALLY AND THE RECORDS KEPT FOR.
Answer:
3 YEARS
Question:
TO ALLOW TIME FOR PLANNING WHEN PREPARING TO OFFLOAD AMMUNITION, SHIPS
SUBMIT AN OFFLOAD PLANNING MESSAGE TO THE OFFLOADING RECEIPT ACTIVITY AT
LEAST HOW MANY DAYS PRIOR TO THE OFFLOAD EVOLUTION?.
Answer:
45 DAYS
Question:
WHAT TYPE OF HIGH TEMPERATURE (F CIRCUIT) THERMOMETERS MUST BE PROPERLY
INSTALLED IN MAGAZINES?.
Answer:
TYPE IC/J 105
Question:
________ WILL NOT BE USED AS TIEDOWN POINTS FOR THE SECURING OF CARGO.
Answer:
PIPES OR PIPING SUPPORTS
, Question:
WHICH OF THE FOLLOWING IS NOT A CERTIFYING AMMUNITION AND EXPLOSIVE WORK
TASK CODE (WTC)?.
Answer:
WTC 3- UNDERWAY REPLENISHMENT
Question:
TEST FITTINGS (NOT INTEGRAL TO THE SPRINKLER VALVE) MUST BE STAMPED WITH
THE.
Answer:
VALVE DAMAGE CONTROL NUMBER
Question:
NO HEAT SENSING DEVICE SHOULD BE INSTALLED MORE THAN _______ FEET (MEASURE
ALONG THE LENGTH OF THE TRANSMISSION TUBING) FROM THE PRPV..
Answer:
50
Question:
EXAMPLES SUCH AS GRENADES, SOUNDING DEVICES, AND SIMILAR ITEMS HAVING
EXPLOSIVE TRAINS WITH LESS THAN TWO EFFECTIVE PROTECTIVE FEATURES, BEST
DESCRIBES COMPATIBILITY GROUB.
Answer:
F
Question:
TO PREVENT THEFT OR LOSS OF MAGAZINE KEYS WHICH COULD PROVIDE
UNAUTHORIZED ACCESS TO BOTH WEAPONS AND AMMUNITON, KEYS TO AMMUNITION
AND EXPLOSIVES SPACES MUST BE KEPT.
Answer:
ON SEPERATE WELDED OR BRAZED RINGS
