Michigan — Barber Licensing Examination with
Practice Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of disinfecting barbering implements?
A. To make tools look polished
B. To destroy many or all disease-causing microorganisms on nonliving
surfaces
C. To sharpen cutting tools
D. To remove all visible hair
Correct Answer: B
Rationale: Disinfection is intended to destroy pathogenic
microorganisms on properly cleaned, nonliving surfaces. Cleaning must
occur before disinfection.
,2. What should a barber do before beginning a service on a new client?
A. Apply styling product
B. Wash or sanitize the hands
C. Spray the client's hair with water
D. Sharpen the clipper
Correct Answer: B
Rationale: Michigan sanitation requirements call for handwashing or
use of hand sanitizer before beginning each new barbering service.
3. Which item should be discarded after one use?
A. Metal comb
B. Clipper
C. Disposable neck strip
D. Stainless-steel shears
Correct Answer: C
,Rationale: Single-use tools and supplies must be disposed of after use
on a patron.
4. Which type of surface is preferred for a barber chair or headrest?
A. Porous wood
B. Fabric that cannot be disinfected
C. Nonporous material that can be disinfected
D. Unfinished leather
Correct Answer: C
Rationale: Michigan rules require chairs, headrests, and similar service
stations to be made of or covered with a nonporous material that can
be disinfected.
5. What is the correct first step when preparing a reusable implement
for disinfection?
A. Store it immediately
, B. Clean it to remove visible debris
C. Place it under ultraviolet light
D. Apply hair spray
Correct Answer: B
Rationale: Cleaning removes hair, oils, and other debris so the
disinfectant can contact the implement effectively.
6. Where should clean barbering tools be stored?
A. With used towels
B. On the floor
C. In a clean, covered container separate from used supplies
D. Inside the waste container
Correct Answer: C
Rationale: Michigan requirements call for clean tools and supplies to be
stored in covered containers separate from used tools and supplies.
Practice Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of disinfecting barbering implements?
A. To make tools look polished
B. To destroy many or all disease-causing microorganisms on nonliving
surfaces
C. To sharpen cutting tools
D. To remove all visible hair
Correct Answer: B
Rationale: Disinfection is intended to destroy pathogenic
microorganisms on properly cleaned, nonliving surfaces. Cleaning must
occur before disinfection.
,2. What should a barber do before beginning a service on a new client?
A. Apply styling product
B. Wash or sanitize the hands
C. Spray the client's hair with water
D. Sharpen the clipper
Correct Answer: B
Rationale: Michigan sanitation requirements call for handwashing or
use of hand sanitizer before beginning each new barbering service.
3. Which item should be discarded after one use?
A. Metal comb
B. Clipper
C. Disposable neck strip
D. Stainless-steel shears
Correct Answer: C
,Rationale: Single-use tools and supplies must be disposed of after use
on a patron.
4. Which type of surface is preferred for a barber chair or headrest?
A. Porous wood
B. Fabric that cannot be disinfected
C. Nonporous material that can be disinfected
D. Unfinished leather
Correct Answer: C
Rationale: Michigan rules require chairs, headrests, and similar service
stations to be made of or covered with a nonporous material that can
be disinfected.
5. What is the correct first step when preparing a reusable implement
for disinfection?
A. Store it immediately
, B. Clean it to remove visible debris
C. Place it under ultraviolet light
D. Apply hair spray
Correct Answer: B
Rationale: Cleaning removes hair, oils, and other debris so the
disinfectant can contact the implement effectively.
6. Where should clean barbering tools be stored?
A. With used towels
B. On the floor
C. In a clean, covered container separate from used supplies
D. Inside the waste container
Correct Answer: C
Rationale: Michigan requirements call for clean tools and supplies to be
stored in covered containers separate from used tools and supplies.
