Boiler Maker Maintenance NCCER Actual
Exam Study Questions with Verified
Answers | Brand New Edition
1. Which organization requires a person to be trained to operate personal lifting
equipment - ANSWER OSHA
2. Where would the usage of a RTJ Gasket be found - ANSWER high pressure
system
3. All of the following are examples of internal manway hardware except -
ANSWER Slide fastener
4. The fitting that makes it easy to dissemble threaded pipe is - ANSWER
Union
5. Valves used to relieve pressure in a pipeline - ANSWER safety valve
6. What tool can be used to generate force making tightening or loosening
easier - ANSWER impact
7. Washers are used to prevent fasteners from marrying? - ANSWER surface
8. Title blocks are found where - ANSWER Bottom right corner
,9. The following threaded fitting requires a thread lubricant except -
ANSWER rubber
10.Taps are used to cut what type of threads? - ANSWER internal threads
11.chain hoist are primarily used for what type of lifting - ANSWER vertical
lifting
12.Oxyfuel torch what valve must be turned off first - ANSWER Acetylene
13.What does SWL stand for? - ANSWER Safe Working Load
14.On a variable can (spring can) support, when are the load straps removed -
ANSWER Just prior to energizing the system
15.When rigging a valve the spring should be placed around the - ANSWER
body
16.Minimum required oxygen and fuel gas storage separation when not in use
and stored in open areas - ANSWER 20'
17.When tightening up a manway or tower that has 1 1/4" x 8" stud bolts, what
size wrench should you use - ANSWER 2"
18.What should a worker do before removing flange bolts on the exchanger
channel head - ANSWER verify blinds are in, bleeders are open, and loto is
complete
19.What does NPT stand for? - ANSWER National Pipe Thread
, 20.Flange protector should be removed from the valve when - ANSWER ready
for installation
21.Which sling configuration has the greatest capacity - ANSWER basket
22.What type of wrench measures how much a fastener is being tightened -
ANSWER Torque
23.What is the purpose of a gasket? - ANSWER to create a seal between 2
stationary parts
24.What is the first consideration when making a gasket - ANSWER material
compatibility
25.In order to get the bundle to line up with the shell side gasket the best tool to
use to lift the bundle is a - ANSWER drift pin
26.ring gaskets may be affected by all of the following except - ANSWER
Number of bolts
27.Which way should the teeth face on a hacksaw blade - ANSWER Away
from handle
28.Pressure of a 1" and 10" pipe when both are 20" tall - ANSWER The
pressure is both the same
Exam Study Questions with Verified
Answers | Brand New Edition
1. Which organization requires a person to be trained to operate personal lifting
equipment - ANSWER OSHA
2. Where would the usage of a RTJ Gasket be found - ANSWER high pressure
system
3. All of the following are examples of internal manway hardware except -
ANSWER Slide fastener
4. The fitting that makes it easy to dissemble threaded pipe is - ANSWER
Union
5. Valves used to relieve pressure in a pipeline - ANSWER safety valve
6. What tool can be used to generate force making tightening or loosening
easier - ANSWER impact
7. Washers are used to prevent fasteners from marrying? - ANSWER surface
8. Title blocks are found where - ANSWER Bottom right corner
,9. The following threaded fitting requires a thread lubricant except -
ANSWER rubber
10.Taps are used to cut what type of threads? - ANSWER internal threads
11.chain hoist are primarily used for what type of lifting - ANSWER vertical
lifting
12.Oxyfuel torch what valve must be turned off first - ANSWER Acetylene
13.What does SWL stand for? - ANSWER Safe Working Load
14.On a variable can (spring can) support, when are the load straps removed -
ANSWER Just prior to energizing the system
15.When rigging a valve the spring should be placed around the - ANSWER
body
16.Minimum required oxygen and fuel gas storage separation when not in use
and stored in open areas - ANSWER 20'
17.When tightening up a manway or tower that has 1 1/4" x 8" stud bolts, what
size wrench should you use - ANSWER 2"
18.What should a worker do before removing flange bolts on the exchanger
channel head - ANSWER verify blinds are in, bleeders are open, and loto is
complete
19.What does NPT stand for? - ANSWER National Pipe Thread
, 20.Flange protector should be removed from the valve when - ANSWER ready
for installation
21.Which sling configuration has the greatest capacity - ANSWER basket
22.What type of wrench measures how much a fastener is being tightened -
ANSWER Torque
23.What is the purpose of a gasket? - ANSWER to create a seal between 2
stationary parts
24.What is the first consideration when making a gasket - ANSWER material
compatibility
25.In order to get the bundle to line up with the shell side gasket the best tool to
use to lift the bundle is a - ANSWER drift pin
26.ring gaskets may be affected by all of the following except - ANSWER
Number of bolts
27.Which way should the teeth face on a hacksaw blade - ANSWER Away
from handle
28.Pressure of a 1" and 10" pipe when both are 20" tall - ANSWER The
pressure is both the same
