Page 1 of 79
CSA W47.1 AND CSA W59 EXAM PREPARATION FOR WELDING
CERTIFICATION QUESTIONS LATEST EDITION 2026 – 2027 VERSION
SOLVED QUESTIONS & ANSWERS
CSA W47.1 AND CSA W59 EXAM PREPARATION –
Comprehensive Test Bank for Welding Certification
Based on CSA W47.1: Certification of Companies for Fusion Welding of Steel and
CSA W59: Welded Steel Construction
SECTION I: CSA W47.1 – SCOPE, DEFINITIONS, AND COMPANY CERTIFICATION
DIVISIONS (Questions 1–30)
Question 1: CSA W47.1 provides requirements for the certification of companies
engaged in which type of welding process?
A) Resistance welding of aluminum
B) Fusion welding of steel
C) Brazing of copper alloys
D) Oxy-fuel welding of cast iron
Correct Answer: B
Rationale: CSA W47.1 is titled "Certification of companies for fusion welding of steel"
and provides requirements for the certification of companies engaged in fusion welding
of steel and the qualification of their personnel and welding procedures.
Question 2: According to CSA W47.1, a company may be certified for fusion welding of
steel in how many divisions?
A) One division
B) Two divisions
C) Three divisions
D) Four divisions
, Page 2 of 79
Correct Answer: C
Rationale: Based on the type of work to be undertaken, a company may be certified for
fusion welding of steel in one of three divisions.
Question 3: CSA W47.1 addresses qualification requirements for which of the following
personnel categories?
A) Welding engineers only
B) Welding supervisors only
C) Tack welders, welders, and welding operators
D) All of the above
Correct Answer: D
Rationale: CSA W47.1 stipulates requirements for welding engineers, welding
supervisors, tack welders, welders, and welding operators.
Question 4: The qualification requirements for tack welders, welders, and welding
operators specified in CSA W47.1 are intended to demonstrate:
A) An individual's theoretical knowledge of welding
B) An individual's basic welding skills and continuing ability
C) An individual's management capabilities
D) An individual's knowledge of metallurgy only
Correct Answer: B
Rationale: The qualification requirements are intended to demonstrate an individual's
basic welding skills and to provide a means of verifying that individual's continuing
ability in the fusion welding of steel.
Question 5: Which edition of CSA W47.1 is the most recent as of 2025?
A) CSA W47.1-09
B) CSA W47.1-19
C) CSA W47.1:25
D) CSA W47.1-03
, Page 3 of 79
Correct Answer: C
Rationale: CSA W47.1:25 is the eighth edition of the standard, published in 2025.
Question 6: CSA W47.1 requires documentation for which of the following?
A) Welding procedures only
B) Personnel qualifications only
C) Both welding procedures and personnel qualifications
D) Neither welding procedures nor personnel qualifications
Correct Answer: C
Rationale: CSA W47.1 provides requirements for the certification of companies and the
qualification of their personnel and welding procedures.
Question 7: Under CSA W47.1, who is responsible for the qualification of welding
personnel?
A) The Canadian Welding Bureau only
B) The certified company
C) The welding supervisor only
D) The government regulatory body
Correct Answer: B
Rationale: The certified company must ensure that welding personnel (tack welders,
welders, and welding operators) are qualified in the type of work being performed under
the scope of the fabricator's certification.
Question 8: The qualification process for welding personnel is outlined in which
subsection of CSA W47.1?
A) Subsection 6.2
B) Subsection 7.3
C) Subsection 8.2
D) Subsection 9.1
, Page 4 of 79
Correct Answer: C
Rationale: The qualification process for welding personnel is outlined in Subsection 8.2
of CSA W47.1.
Question 9: CSA W47.1 is published by which organization?
A) American Welding Society (AWS)
B) Canadian Standards Association (CSA Group)
C) International Organization for Standardization (ISO)
D) American Society of Mechanical Engineers (ASME)
Correct Answer: B
Rationale: CSA W47.1 is a Canadian Standards Association (CSA Group) standard.
Question 10: Which of the following is NOT a personnel category addressed by CSA
W47.1?
A) Welding engineer
B) Welding supervisor
C) Welding inspector
D) Welding operator
Correct Answer: C
Rationale: CSA W47.1 addresses welding engineers, welding supervisors, tack welders,
welders, and welding operators. Welding inspector certification is typically addressed
under a separate standard such as CSA W178.1.
Question 11: Under CSA W47.1, the welding supervisor's qualifications are detailed in
which section?
A) Section 5
B) Section 6
C) Section 7
D) Section 8
CSA W47.1 AND CSA W59 EXAM PREPARATION FOR WELDING
CERTIFICATION QUESTIONS LATEST EDITION 2026 – 2027 VERSION
SOLVED QUESTIONS & ANSWERS
CSA W47.1 AND CSA W59 EXAM PREPARATION –
Comprehensive Test Bank for Welding Certification
Based on CSA W47.1: Certification of Companies for Fusion Welding of Steel and
CSA W59: Welded Steel Construction
SECTION I: CSA W47.1 – SCOPE, DEFINITIONS, AND COMPANY CERTIFICATION
DIVISIONS (Questions 1–30)
Question 1: CSA W47.1 provides requirements for the certification of companies
engaged in which type of welding process?
A) Resistance welding of aluminum
B) Fusion welding of steel
C) Brazing of copper alloys
D) Oxy-fuel welding of cast iron
Correct Answer: B
Rationale: CSA W47.1 is titled "Certification of companies for fusion welding of steel"
and provides requirements for the certification of companies engaged in fusion welding
of steel and the qualification of their personnel and welding procedures.
Question 2: According to CSA W47.1, a company may be certified for fusion welding of
steel in how many divisions?
A) One division
B) Two divisions
C) Three divisions
D) Four divisions
, Page 2 of 79
Correct Answer: C
Rationale: Based on the type of work to be undertaken, a company may be certified for
fusion welding of steel in one of three divisions.
Question 3: CSA W47.1 addresses qualification requirements for which of the following
personnel categories?
A) Welding engineers only
B) Welding supervisors only
C) Tack welders, welders, and welding operators
D) All of the above
Correct Answer: D
Rationale: CSA W47.1 stipulates requirements for welding engineers, welding
supervisors, tack welders, welders, and welding operators.
Question 4: The qualification requirements for tack welders, welders, and welding
operators specified in CSA W47.1 are intended to demonstrate:
A) An individual's theoretical knowledge of welding
B) An individual's basic welding skills and continuing ability
C) An individual's management capabilities
D) An individual's knowledge of metallurgy only
Correct Answer: B
Rationale: The qualification requirements are intended to demonstrate an individual's
basic welding skills and to provide a means of verifying that individual's continuing
ability in the fusion welding of steel.
Question 5: Which edition of CSA W47.1 is the most recent as of 2025?
A) CSA W47.1-09
B) CSA W47.1-19
C) CSA W47.1:25
D) CSA W47.1-03
, Page 3 of 79
Correct Answer: C
Rationale: CSA W47.1:25 is the eighth edition of the standard, published in 2025.
Question 6: CSA W47.1 requires documentation for which of the following?
A) Welding procedures only
B) Personnel qualifications only
C) Both welding procedures and personnel qualifications
D) Neither welding procedures nor personnel qualifications
Correct Answer: C
Rationale: CSA W47.1 provides requirements for the certification of companies and the
qualification of their personnel and welding procedures.
Question 7: Under CSA W47.1, who is responsible for the qualification of welding
personnel?
A) The Canadian Welding Bureau only
B) The certified company
C) The welding supervisor only
D) The government regulatory body
Correct Answer: B
Rationale: The certified company must ensure that welding personnel (tack welders,
welders, and welding operators) are qualified in the type of work being performed under
the scope of the fabricator's certification.
Question 8: The qualification process for welding personnel is outlined in which
subsection of CSA W47.1?
A) Subsection 6.2
B) Subsection 7.3
C) Subsection 8.2
D) Subsection 9.1
, Page 4 of 79
Correct Answer: C
Rationale: The qualification process for welding personnel is outlined in Subsection 8.2
of CSA W47.1.
Question 9: CSA W47.1 is published by which organization?
A) American Welding Society (AWS)
B) Canadian Standards Association (CSA Group)
C) International Organization for Standardization (ISO)
D) American Society of Mechanical Engineers (ASME)
Correct Answer: B
Rationale: CSA W47.1 is a Canadian Standards Association (CSA Group) standard.
Question 10: Which of the following is NOT a personnel category addressed by CSA
W47.1?
A) Welding engineer
B) Welding supervisor
C) Welding inspector
D) Welding operator
Correct Answer: C
Rationale: CSA W47.1 addresses welding engineers, welding supervisors, tack welders,
welders, and welding operators. Welding inspector certification is typically addressed
under a separate standard such as CSA W178.1.
Question 11: Under CSA W47.1, the welding supervisor's qualifications are detailed in
which section?
A) Section 5
B) Section 6
C) Section 7
D) Section 8
