1
MCQ IN PHILIPPINE ELECTRICAL CODE
(PEC) REE BOARD EXAM
This is the Multiple Choice Questions Part 6 of the Series in Philippine Electrical Code (PEC) as one of the Electrical
Engineering topic. In Preparation for the REE Board Exam make sure to expose yourself and familiarize in each and every
questions compiled here taken from various sources including but not limited to past Board Exam Questions in Electrical
Engineering field, Electrical Engineering Books, Journals and other Electrical Engineering References.
Continue Practice Exam Test Questions Part 6 of the Series
Choose the letter of the best answer in each questions.
➛ MCQ in Philippine Electrical Code (PEC) Part 5 | REE Board Exam
251. In every kitchen, family room, living room, parlor, bedroom or similar rooms of area of dwelling units, receptacle
outlets shall be installed so that no point along the floor line any wall space is more than measured horizontally from
an outlet in that space.
A. 2,000 mm
B. 1,800 mm
1/18
,2
C. 1,900 mm
D. 2,100 mm
View Answer:
Answer: Option B
Solution:
252. The path to ground from circuits equipment and metal enclosures for conductors shall
A. have capacity to conduct safely any fault current
B. have sufficiently low impedance
C. be permanent and continuous
D. all of these
View Answer:
Answer: Option D
Solution:
253. RME Board October 1994
Where the voltage between conductors does not exceed 300 V and the roof has a slope of not less than 100 mm in 300 mm,
the clearance can be reduced to
A. 500 mm
B. 800 mm
C. 1000 mm
D. 900 mm
View Answer:
Answer: Option C
Solution:
254. RME Board April 1995
The uses of non-metallic extensions are NOT allowed in all but one of the following. Which one is this?
A. As an aerial cable
B. Where exposed to corrosive vapors
2/18
, 3
C. Where subject to corrosive vapors
D. Through floors or partitions
View Answer:
Answer: Option C
Solution:
255. RME Board April 1996
What is the minimum horizontal clearance for open conductors from windows, doors, porches, fire escapes or similar
location?
A. 1800 mm
B. 1500 mm
C. 1200 mm
D. 1000 mm
View Answer:
Answer: Option D
Solution:
256. RME Board Exam April 1995
What is the maximum allowed temperature of type TW conductors?
A. 75°C
B. 50°C
C. 60°C
D. 90°C
View Answer:
Answer: Option C
Solution:
257. RME Board October 1995
Concealed knob and tube wiring conductors shall be rigidly supported on knobs not more than a certain minimum distance
apart. What is this distance?
A. 2,000 mm
3/18
MCQ IN PHILIPPINE ELECTRICAL CODE
(PEC) REE BOARD EXAM
This is the Multiple Choice Questions Part 6 of the Series in Philippine Electrical Code (PEC) as one of the Electrical
Engineering topic. In Preparation for the REE Board Exam make sure to expose yourself and familiarize in each and every
questions compiled here taken from various sources including but not limited to past Board Exam Questions in Electrical
Engineering field, Electrical Engineering Books, Journals and other Electrical Engineering References.
Continue Practice Exam Test Questions Part 6 of the Series
Choose the letter of the best answer in each questions.
➛ MCQ in Philippine Electrical Code (PEC) Part 5 | REE Board Exam
251. In every kitchen, family room, living room, parlor, bedroom or similar rooms of area of dwelling units, receptacle
outlets shall be installed so that no point along the floor line any wall space is more than measured horizontally from
an outlet in that space.
A. 2,000 mm
B. 1,800 mm
1/18
,2
C. 1,900 mm
D. 2,100 mm
View Answer:
Answer: Option B
Solution:
252. The path to ground from circuits equipment and metal enclosures for conductors shall
A. have capacity to conduct safely any fault current
B. have sufficiently low impedance
C. be permanent and continuous
D. all of these
View Answer:
Answer: Option D
Solution:
253. RME Board October 1994
Where the voltage between conductors does not exceed 300 V and the roof has a slope of not less than 100 mm in 300 mm,
the clearance can be reduced to
A. 500 mm
B. 800 mm
C. 1000 mm
D. 900 mm
View Answer:
Answer: Option C
Solution:
254. RME Board April 1995
The uses of non-metallic extensions are NOT allowed in all but one of the following. Which one is this?
A. As an aerial cable
B. Where exposed to corrosive vapors
2/18
, 3
C. Where subject to corrosive vapors
D. Through floors or partitions
View Answer:
Answer: Option C
Solution:
255. RME Board April 1996
What is the minimum horizontal clearance for open conductors from windows, doors, porches, fire escapes or similar
location?
A. 1800 mm
B. 1500 mm
C. 1200 mm
D. 1000 mm
View Answer:
Answer: Option D
Solution:
256. RME Board Exam April 1995
What is the maximum allowed temperature of type TW conductors?
A. 75°C
B. 50°C
C. 60°C
D. 90°C
View Answer:
Answer: Option C
Solution:
257. RME Board October 1995
Concealed knob and tube wiring conductors shall be rigidly supported on knobs not more than a certain minimum distance
apart. What is this distance?
A. 2,000 mm
3/18