ALABAMA FIRE ALARM SYSTEMS CONTRACTOR
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) Q&A 2027|INSTANT
DOWNLOAD PDF
1. What is the primary purpose of a fire alarm system?
A. To extinguish a fire automatically
B. To detect fire conditions and provide appropriate notification
C. To provide emergency electrical power
D. To replace fire sprinklers
Correct Answer: B. To detect fire conditions and provide
appropriate notification
Rationale: A fire alarm system detects fire-related conditions
and communicates an alarm or supervisory/trouble condition
to occupants and/or supervising personnel.
2. Which organization publishes NFPA 72, the National Fire
Alarm and Signaling Code?
A. OSHA
B. ICC
C. NFPA
D. NIOSH
Correct Answer: C. NFPA
,Rationale: The National Fire Protection Association publishes
NFPA 72, which addresses fire alarm and signaling systems.
3. Under Alabama's Certified Fire Alarm Act, a business
engaging in fire alarm contracting generally needs what?
A. A plumbing license
B. A State Fire Marshal fire alarm contractor permit
C. Only a general business license
D. A driver's license
Correct Answer: B. A State Fire Marshal fire alarm contractor
permit
Rationale: Alabama law establishes a State Fire Marshal
permitting requirement for businesses engaging in fire alarm
contracting.
4. What qualification is identified by Alabama law for the
certificate holder of a fire alarm contractor?
A. NICET Fire Alarm Level I
B. NICET Fire Alarm Level II
C. NICET Fire Alarm Level III or higher
D. CPR certification
Correct Answer: C. NICET Fire Alarm Level III or higher
,Rationale: Alabama's fire alarm law identifies NICET Fire Alarm
System Technician Level III or above as the competency
qualification for the certificate holder.
5. What level of NICET certification is identified for individuals
programming, maintaining, testing, inspecting, certifying, or
modifying fire alarm systems?
A. Level I
B. Level II
C. Level III only
D. Level IV only
Correct Answer: B. Level II
Rationale: Alabama law identifies NICET Fire Alarm System
Technician Level II, or an acceptable equivalent nationally
recognized certification, for these activities.
6. What is the main function of a fire alarm control unit
(FACU)?
A. Store water
B. Monitor inputs and control outputs
C. Supply natural gas
D. Ventilate the building
Correct Answer: B. Monitor inputs and control outputs
, Rationale: The control unit receives signals from initiating
devices and controls notification and other connected
functions.
7. Which device is designed primarily to detect smoke
particles?
A. Heat detector
B. Smoke detector
C. Manual pull station
D. Waterflow switch
Correct Answer: B. Smoke detector
Rationale: Smoke detectors respond to products of combustion
or smoke particles.
8. Which initiating device responds primarily to an increase in
temperature?
A. Heat detector
B. Smoke detector
C. Pull station
D. Notification appliance
Correct Answer: A. Heat detector
Rationale: Heat detectors operate when temperature reaches a
specified threshold or changes at a specified rate.
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) Q&A 2027|INSTANT
DOWNLOAD PDF
1. What is the primary purpose of a fire alarm system?
A. To extinguish a fire automatically
B. To detect fire conditions and provide appropriate notification
C. To provide emergency electrical power
D. To replace fire sprinklers
Correct Answer: B. To detect fire conditions and provide
appropriate notification
Rationale: A fire alarm system detects fire-related conditions
and communicates an alarm or supervisory/trouble condition
to occupants and/or supervising personnel.
2. Which organization publishes NFPA 72, the National Fire
Alarm and Signaling Code?
A. OSHA
B. ICC
C. NFPA
D. NIOSH
Correct Answer: C. NFPA
,Rationale: The National Fire Protection Association publishes
NFPA 72, which addresses fire alarm and signaling systems.
3. Under Alabama's Certified Fire Alarm Act, a business
engaging in fire alarm contracting generally needs what?
A. A plumbing license
B. A State Fire Marshal fire alarm contractor permit
C. Only a general business license
D. A driver's license
Correct Answer: B. A State Fire Marshal fire alarm contractor
permit
Rationale: Alabama law establishes a State Fire Marshal
permitting requirement for businesses engaging in fire alarm
contracting.
4. What qualification is identified by Alabama law for the
certificate holder of a fire alarm contractor?
A. NICET Fire Alarm Level I
B. NICET Fire Alarm Level II
C. NICET Fire Alarm Level III or higher
D. CPR certification
Correct Answer: C. NICET Fire Alarm Level III or higher
,Rationale: Alabama's fire alarm law identifies NICET Fire Alarm
System Technician Level III or above as the competency
qualification for the certificate holder.
5. What level of NICET certification is identified for individuals
programming, maintaining, testing, inspecting, certifying, or
modifying fire alarm systems?
A. Level I
B. Level II
C. Level III only
D. Level IV only
Correct Answer: B. Level II
Rationale: Alabama law identifies NICET Fire Alarm System
Technician Level II, or an acceptable equivalent nationally
recognized certification, for these activities.
6. What is the main function of a fire alarm control unit
(FACU)?
A. Store water
B. Monitor inputs and control outputs
C. Supply natural gas
D. Ventilate the building
Correct Answer: B. Monitor inputs and control outputs
, Rationale: The control unit receives signals from initiating
devices and controls notification and other connected
functions.
7. Which device is designed primarily to detect smoke
particles?
A. Heat detector
B. Smoke detector
C. Manual pull station
D. Waterflow switch
Correct Answer: B. Smoke detector
Rationale: Smoke detectors respond to products of combustion
or smoke particles.
8. Which initiating device responds primarily to an increase in
temperature?
A. Heat detector
B. Smoke detector
C. Pull station
D. Notification appliance
Correct Answer: A. Heat detector
Rationale: Heat detectors operate when temperature reaches a
specified threshold or changes at a specified rate.
