NATE
Guide
AC 2026_2027.pdf
Service Certification Updated Study
NATE
Guide
AC 2026_2027.pdf
Service Certification Updated Study Guide 2026_2027.pdf
NATE AC Service Certification Updated
Study Guide 2026/2027
Guidehttps://www.stuvia.com/dashboard!@_)#*)(@$)($@*($@)($@*_
NATE AC Service Certification Updated Study
NATE
Guide
AC 2026_2027.pdf
Service Certification Updated Study
NATE
Guide
AC 2026_2027.pdf
Service Certification Updated Study Guide 2026_2027.pdf
,NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf
A system is supplied from the factory with charge of 5 pounds 10 ounces for a 15 foot line
set. The line set is 25 feet long. The manufacturer's instruction sheet specifies 0.6 ounces of
refrigeration to be added for each added foot of refrigerant line set length. What is the total
refrigerant charge for the system?
A. 6 ounces
B. 5 pounds
C. 5 pounds 10 ounces
D. 6 pounds
D. 6 pounds
15ft - 25ft = 10ft x .6 = 6 ounces
5 pounds + 10 ounces + 6 ounces
5 pounds + 16 ounces = 6 pounds
NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf
,NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf
The purpose of using flux when soldering is to:
A. anneal the surface.
B. give better heat flow.
C. reduce oxidation.
D. pre-seal the oxidation.
C. reduce oxidation.
Outdoor condensing units that are installed in areas where flooding is possible must:
A. be mounted above flood level.
B. utilize NEMA 1 enclosures.
C. be mounted under an overhanging eave.
D. use water resistant components.
A. be mounted above flood level.
NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf
, NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf
The component used to reduce sound transmission and prevent water leaks on a rooftop air
conditioner packaged unit installation is the:
A. curb gasket.
B. silicone caulk.
C. roof flashing.
D. roofing tar.
A. curb gasket.
NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf NATE AC Service Certification (Updatd).pdf