Minnesota Boiler Engineer Examination (Class
C) Questions and Correct Answers (Verified
Answers) Plus Rationale 2027 Q&A| Instant
Download Pdf
1. Under Minnesota law, a boiler operating at steam pressure above
15 psig is generally classified as what?
A. Low-pressure boiler
B. High-pressure boiler
C. Heating boiler
D. Hot-water supply boiler
Rationale: Minnesota defines a high-pressure boiler as one operating
at steam or other vapor pressure greater than 15 psig. This distinction
is important because high-pressure plants have different licensing,
attendance, inspection, and operating requirements than low-
pressure plants.
,2. Under Minnesota's classification system, a second-class engineer,
Grade C, is primarily authorized to take charge of low-pressure boilers
of not more than:
A. 50 horsepower
B. 100 horsepower
C. 500 horsepower
D. Unlimited horsepower
Rationale: A second-class Grade C engineer may take charge of low-
pressure boilers and their appurtenances up to 100 horsepower. The
license also provides other operating privileges under specified
supervision and plant conditions.
3. What is the minimum age generally required for a Minnesota
second-class engineer, Grade C license?
A. 16
B. 17
C. 18
D. 21
Rationale: Minnesota law requires an applicant for a second-class
engineer Grade C license to be at least 18 years old. Age is only one
,qualification; the applicant must also meet the applicable experience
and examination requirements.
4. Which organization administers Minnesota boiler engineer licensing
examinations?
A. Minnesota Department of Transportation
B. Minnesota Department of Public Safety
C. Minnesota Department of Labor and Industry
D. Minnesota Pollution Control Agency
Rationale: Boiler engineer examinations are developed and
administered by the commissioner through the Minnesota
Department of Labor and Industry. Applicants must pass the
applicable examination before receiving the license.
5. What is the current time limit for Minnesota boiler engineer
examinations?
A. 60 minutes
B. 90 minutes
C. 2 hours
D. 2.5 hours
, Rationale: Minnesota DLI states that the time limit for all boiler
examinations is 2.5 hours. Effective time management is therefore
important when working through calculation, safety, operating, and
regulatory questions.
6. Which statement best describes the purpose of a boiler safety
valve?
A. To increase boiler pressure
B. To control feedwater temperature
C. To automatically relieve excessive pressure
D. To prevent scale formation
Rationale: A safety valve protects the boiler and connected equipment
from dangerous overpressure. When pressure reaches the valve's set
pressure, the valve opens and discharges steam or fluid to limit
further pressure rise.
7. What is the primary purpose of a boiler low-water cutoff?
A. To increase steam production
B. To maintain chemical treatment levels
C. To shut down the burner when water level becomes dangerously
C) Questions and Correct Answers (Verified
Answers) Plus Rationale 2027 Q&A| Instant
Download Pdf
1. Under Minnesota law, a boiler operating at steam pressure above
15 psig is generally classified as what?
A. Low-pressure boiler
B. High-pressure boiler
C. Heating boiler
D. Hot-water supply boiler
Rationale: Minnesota defines a high-pressure boiler as one operating
at steam or other vapor pressure greater than 15 psig. This distinction
is important because high-pressure plants have different licensing,
attendance, inspection, and operating requirements than low-
pressure plants.
,2. Under Minnesota's classification system, a second-class engineer,
Grade C, is primarily authorized to take charge of low-pressure boilers
of not more than:
A. 50 horsepower
B. 100 horsepower
C. 500 horsepower
D. Unlimited horsepower
Rationale: A second-class Grade C engineer may take charge of low-
pressure boilers and their appurtenances up to 100 horsepower. The
license also provides other operating privileges under specified
supervision and plant conditions.
3. What is the minimum age generally required for a Minnesota
second-class engineer, Grade C license?
A. 16
B. 17
C. 18
D. 21
Rationale: Minnesota law requires an applicant for a second-class
engineer Grade C license to be at least 18 years old. Age is only one
,qualification; the applicant must also meet the applicable experience
and examination requirements.
4. Which organization administers Minnesota boiler engineer licensing
examinations?
A. Minnesota Department of Transportation
B. Minnesota Department of Public Safety
C. Minnesota Department of Labor and Industry
D. Minnesota Pollution Control Agency
Rationale: Boiler engineer examinations are developed and
administered by the commissioner through the Minnesota
Department of Labor and Industry. Applicants must pass the
applicable examination before receiving the license.
5. What is the current time limit for Minnesota boiler engineer
examinations?
A. 60 minutes
B. 90 minutes
C. 2 hours
D. 2.5 hours
, Rationale: Minnesota DLI states that the time limit for all boiler
examinations is 2.5 hours. Effective time management is therefore
important when working through calculation, safety, operating, and
regulatory questions.
6. Which statement best describes the purpose of a boiler safety
valve?
A. To increase boiler pressure
B. To control feedwater temperature
C. To automatically relieve excessive pressure
D. To prevent scale formation
Rationale: A safety valve protects the boiler and connected equipment
from dangerous overpressure. When pressure reaches the valve's set
pressure, the valve opens and discharges steam or fluid to limit
further pressure rise.
7. What is the primary purpose of a boiler low-water cutoff?
A. To increase steam production
B. To maintain chemical treatment levels
C. To shut down the burner when water level becomes dangerously
