TPC 108 PORTABLE POWER TOOLS UPDATED ACTUAL QUESTIONS AND CORRECT ANSWERS

TPC 108 PORTABLE POWER TOOLS UPDATED ACTUAL
QUESTIONS AND CORRECT ANSWERS

Question:
1. What is the most basic attachment used with a power drill
Answer:
Drill Bit

Question:
2. What are the two main types of power drills?
Answer:
Light Duty, Heavy Duty

Question:
3. What marks show where holes are to be drilled
Answer:
Layout Marks

Question:
4. What accessory coverts a portable drill to a stationary tool?
Answer:
Drill Press Stand

Question:
5. When drilling a blind hole, what can you use to keep the bit from going all the way through the
material?
Answer:
Depth Gauge or Stop Rod

Question:
6. What device should you use in starting to drill a hole at an angle?
Answer:
Jig

Question:
7. What kind of hand grip does a light duty drill usually have?
Answer:
Pistol

Question:
8. What accessory can be added to a drill for working in small spaces?
Answer:
Right Angle Adapter

,Question:
9. The layout mark on a workpiece shows the location of the?
Answer:
Center of the hole

Question:
10. A percussion hammer the bit into the work
Answer:
Pounds

Question:
11. A hammer can turn the bit without pounding, much like a drill
Answer:
Rotary

Question:
12. The star drill requires a special one piece that includes the handle
Answer:
Chuck

Question:
13. What kind of chisel is used to remove brickwork or dig out old surface mortar for tuckpointing
Answer:
Mortar Cutting

Question:
14. Carbide tipped bits are used for boring holes with diameters up to 3 1/2 in.
Answer:
Core

Question:
15. What instrument shows you how much electric current an electric hammer is using?
Answer:
Ammeter

Question:
16. A special is used for installing self drilling anchors
Answer:
Rotary Set Hammer

Question:
17. Always remove the key from a before you start the motor
Answer:
Three Jaw Chuck

, Question:
18. A controls the speed of a dual speed drill
Answer:
Two Position Throttle

Question:
19. Backing the bit out of the hole occasionally clears from the hole
Answer:
Dust and Chips

Question:
20. A special pneumatic hammer with a drill is often used for boring holes in masonry
Answer:
Star

Question:
21. A needle scaler is used for removing rust, paint scale, flux, and weld spatter from surfaces
Answer:
Irregular

Question:
22. A retainer on a pneumatic digger is more convenient than a retainer
Answer:
Latch, Sleeve

Question:
23. Each pneumatic tool should be equipped with its own having a capacity of at least .
Answer:
Air Line Lubricators, 1/2 Pint

Question:
24. When drilling blind holes, use a
Answer:
Depth Gauge

Question:
25. Removing old mortar from masonry seams is a operation
Answer:
Scaling

Question:
26. What kind of wrench should you use on air hose connections
Answer:
Flare Nut