NYC STATIONARY ENGINEER LICENSE PART 3 EXAM STUDY SET
WITH COMPLETE SOLUTIONS 100% VERIFIED!!! ALREADY
GRADED A+ LATEST UPDATE!!!
Heating Surface - (ANSWER)All areas in contact with heated gases (fire tube ID, Water tube OD)
Boiler pH - (ANSWER)The pH should be between 7-9 (8.5). Acid attack pH below 8.5, caustic attack above
12.9.
Blowoff Tank Outlet Size - (ANSWER)2 times the diameter of the blowdown piping, 6 inches internal
entering the bottom of the blow off tank.
Clogged Strainers - (ANSWER)Deep vacuum.
Heat Recovery Steam Generators (HRSG) - (ANSWER)Water chemistry is harder to maintain during start
ups and shut down.
Welding Control - (ANSWER)An engineer supervising a welding company approved by the D.O.B.
Remote Disconnect Label - (ANSWER)Remote control for burner.
Deficiency of Air Supply - (ANSWER)High heat loss.
Electric Remote Shut Down Location - (ANSWER)Egress of the boiler room.
Steam Gauge Dial Graduation - (ANSWER)Approx double the PSI that the safety valve is set to, but never
less than 1.5 times the pressure.
Certified Welder Report Maintenance - (ANSWER)The welding agency, must be available to the DOB.
Standard Non-Mercury Gauge Label - (ANSWER)Name of manufacturer.
, NYC STATIONARY ENGINEER LICENSE PART 3 EXAM STUDY SET
WITH COMPLETE SOLUTIONS 100% VERIFIED!!! ALREADY
GRADED A+ LATEST UPDATE!!!
Boiler Requirements - (ANSWER)One pressure gauge.
Inspector Notice Posting - (ANSWER)On or near the boiler.
Feed Water Chemicals Testing Frequency - (ANSWER)Daily.
Records of Boiler Alterations - (ANSWER)Owner and on premises.
Material for Reseating Steam Valves - (ANSWER)Stellite.
Cast Iron Header Pressure Limit - (ANSWER)160 Psi.
Bottom Blow Off Frequency - (ANSWER)Daily.
S Stamp Meaning - (ANSWER)Power boiler (high pressure).
H Stamp Meaning - (ANSWER)Low pressure boiler.
Boiler Feed Water Pump Limitation - (ANSWER)High pressure heater.
Water Treatment Purpose - (ANSWER)Prevents water and impurities from being carried over with steam.
ASME Section for Boilers - (ANSWER)Section Two.
Centrifugal Pumps Types - (ANSWER)Radial, Axial and mixed (not vane).
WITH COMPLETE SOLUTIONS 100% VERIFIED!!! ALREADY
GRADED A+ LATEST UPDATE!!!
Heating Surface - (ANSWER)All areas in contact with heated gases (fire tube ID, Water tube OD)
Boiler pH - (ANSWER)The pH should be between 7-9 (8.5). Acid attack pH below 8.5, caustic attack above
12.9.
Blowoff Tank Outlet Size - (ANSWER)2 times the diameter of the blowdown piping, 6 inches internal
entering the bottom of the blow off tank.
Clogged Strainers - (ANSWER)Deep vacuum.
Heat Recovery Steam Generators (HRSG) - (ANSWER)Water chemistry is harder to maintain during start
ups and shut down.
Welding Control - (ANSWER)An engineer supervising a welding company approved by the D.O.B.
Remote Disconnect Label - (ANSWER)Remote control for burner.
Deficiency of Air Supply - (ANSWER)High heat loss.
Electric Remote Shut Down Location - (ANSWER)Egress of the boiler room.
Steam Gauge Dial Graduation - (ANSWER)Approx double the PSI that the safety valve is set to, but never
less than 1.5 times the pressure.
Certified Welder Report Maintenance - (ANSWER)The welding agency, must be available to the DOB.
Standard Non-Mercury Gauge Label - (ANSWER)Name of manufacturer.
, NYC STATIONARY ENGINEER LICENSE PART 3 EXAM STUDY SET
WITH COMPLETE SOLUTIONS 100% VERIFIED!!! ALREADY
GRADED A+ LATEST UPDATE!!!
Boiler Requirements - (ANSWER)One pressure gauge.
Inspector Notice Posting - (ANSWER)On or near the boiler.
Feed Water Chemicals Testing Frequency - (ANSWER)Daily.
Records of Boiler Alterations - (ANSWER)Owner and on premises.
Material for Reseating Steam Valves - (ANSWER)Stellite.
Cast Iron Header Pressure Limit - (ANSWER)160 Psi.
Bottom Blow Off Frequency - (ANSWER)Daily.
S Stamp Meaning - (ANSWER)Power boiler (high pressure).
H Stamp Meaning - (ANSWER)Low pressure boiler.
Boiler Feed Water Pump Limitation - (ANSWER)High pressure heater.
Water Treatment Purpose - (ANSWER)Prevents water and impurities from being carried over with steam.
ASME Section for Boilers - (ANSWER)Section Two.
Centrifugal Pumps Types - (ANSWER)Radial, Axial and mixed (not vane).
