AZ ROC – CR-16 Fire Protection Contractor
Examination Questions and Correct Answers
(Verified Answers) Plus Rationale 2027 Q&A|
Instant Download Pdf
1. What is the primary purpose of a fire sprinkler system?
A. To replace the need for fire alarms
B. To provide emergency lighting
C. To control or suppress a fire until it can be extinguished
D. To ventilate smoke from a building
Rationale: Automatic sprinkler systems are designed primarily to control
or suppress developing fires, limiting fire growth and protecting
occupants and property while allowing firefighting operations to
proceed.
2. Which component of an automatic sprinkler system is designed to
open when exposed to sufficient heat?
,A. Alarm check valve
B. Fire pump
C. Pressure-reducing valve
D. Sprinkler head
Rationale: A sprinkler head contains a heat-responsive element. When
the temperature reaches the sprinkler's operating point, the element
releases and allows water to discharge.
3. What is the function of a fire department connection (FDC)?
A. To drain the sprinkler system
B. To test smoke detectors
C. To allow firefighters to supplement the water supply to a fire
protection system
D. To automatically activate the fire alarm panel
Rationale: The FDC provides firefighters with an exterior connection
through which fire department pumpers can supply additional water to
the sprinkler or standpipe system.
4. Which device prevents water from flowing backward into a potable
water supply?
A. Flow switch
B. Alarm gong
,C. Backflow prevention assembly
D. Test-and-drain valve
Rationale: Backflow prevention assemblies protect the potable water
system from contamination by preventing reverse flow from fire
protection piping into the domestic water supply.
5. What is the purpose of an alarm check valve in a wet-pipe sprinkler
system?
A. To reduce sprinkler pressure
B. To permit water flow toward sprinklers while helping prevent
reverse flow and activating waterflow alarm functions
C. To drain the entire building automatically
D. To regulate building temperature
Rationale: An alarm check valve allows water to flow toward the
sprinklers and incorporates alarm provisions that respond when
sustained water movement occurs.
6. In a wet-pipe sprinkler system, the piping normally contains:
A. Compressed air only
B. Nitrogen only
C. Water under pressure
D. Carbon dioxide
, Rationale: Wet-pipe systems keep the distribution piping filled with
water under pressure. When a sprinkler operates, water is immediately
available for discharge.
7. Which type of sprinkler system is generally used where freezing
temperatures could damage water-filled piping?
A. Wet-pipe system
B. Dry-pipe system
C. Deluge system only
D. Standpipe system
Rationale: Dry-pipe systems normally contain pressurized air or nitrogen
instead of water in the sprinkler piping. Water enters the piping after
the dry-pipe valve operates, making them suitable for areas subject to
freezing.
8. What normally holds back the water in a dry-pipe sprinkler system?
A. Flow switch
B. Dry-pipe valve
C. Sprinkler escutcheon
D. Pressure gauge
Examination Questions and Correct Answers
(Verified Answers) Plus Rationale 2027 Q&A|
Instant Download Pdf
1. What is the primary purpose of a fire sprinkler system?
A. To replace the need for fire alarms
B. To provide emergency lighting
C. To control or suppress a fire until it can be extinguished
D. To ventilate smoke from a building
Rationale: Automatic sprinkler systems are designed primarily to control
or suppress developing fires, limiting fire growth and protecting
occupants and property while allowing firefighting operations to
proceed.
2. Which component of an automatic sprinkler system is designed to
open when exposed to sufficient heat?
,A. Alarm check valve
B. Fire pump
C. Pressure-reducing valve
D. Sprinkler head
Rationale: A sprinkler head contains a heat-responsive element. When
the temperature reaches the sprinkler's operating point, the element
releases and allows water to discharge.
3. What is the function of a fire department connection (FDC)?
A. To drain the sprinkler system
B. To test smoke detectors
C. To allow firefighters to supplement the water supply to a fire
protection system
D. To automatically activate the fire alarm panel
Rationale: The FDC provides firefighters with an exterior connection
through which fire department pumpers can supply additional water to
the sprinkler or standpipe system.
4. Which device prevents water from flowing backward into a potable
water supply?
A. Flow switch
B. Alarm gong
,C. Backflow prevention assembly
D. Test-and-drain valve
Rationale: Backflow prevention assemblies protect the potable water
system from contamination by preventing reverse flow from fire
protection piping into the domestic water supply.
5. What is the purpose of an alarm check valve in a wet-pipe sprinkler
system?
A. To reduce sprinkler pressure
B. To permit water flow toward sprinklers while helping prevent
reverse flow and activating waterflow alarm functions
C. To drain the entire building automatically
D. To regulate building temperature
Rationale: An alarm check valve allows water to flow toward the
sprinklers and incorporates alarm provisions that respond when
sustained water movement occurs.
6. In a wet-pipe sprinkler system, the piping normally contains:
A. Compressed air only
B. Nitrogen only
C. Water under pressure
D. Carbon dioxide
, Rationale: Wet-pipe systems keep the distribution piping filled with
water under pressure. When a sprinkler operates, water is immediately
available for discharge.
7. Which type of sprinkler system is generally used where freezing
temperatures could damage water-filled piping?
A. Wet-pipe system
B. Dry-pipe system
C. Deluge system only
D. Standpipe system
Rationale: Dry-pipe systems normally contain pressurized air or nitrogen
instead of water in the sprinkler piping. Water enters the piping after
the dry-pipe valve operates, making them suitable for areas subject to
freezing.
8. What normally holds back the water in a dry-pipe sprinkler system?
A. Flow switch
B. Dry-pipe valve
C. Sprinkler escutcheon
D. Pressure gauge
