dispensing LP-gas safely in texas
Study online at https://quizlet.com/_62ivne
1. it is the ____ responsibility to understand the regula- operators
tions and operations of the dispensing equipment
2. a ____ ____ must be done on every cylinder before it can visual inspection
be filled to ensure that are safe for filling
3. always make sure cylinder is filled to its proper level to overfilling
avoid ____
4. it is also the operators responsibility to educate the customer
____
5. always transport & store a cylinder in a ____ ____ posi- secure upright
tion so it will not fall shift or roll
6. never store cylinders inside a ____ ____ hot vehicle
7. remind customer to always proceed directly to their destination
____ and immediately ____ the cylinder from their vehi- remove
cle
8. wearing ____ ____ helps reduce the chance of produc- cotton blend
ing a static spark
9. ____ is an information bulletin that alerts you to prop- MSDS
erties and health hazards of propane
10. ____ is added to propane to increase the likelihood that odorant
a leak will be detected
11. liquid propane will ____ when heat is added to it expand
12. in order to allow for liquid expansion propane cylin- 80
ders are only filled to ____ % of their capacity
, dispensing LP-gas safely in texas
Study online at https://quizlet.com/_62ivne
13. propane liquid released into the air will expand to ____ 270
times it's original volume
14. ____ and ____ ____ are 2 types of PPE required when gloves
filling containers because of the refrigerating effect of safety glasses
liquid propane
15. gloves & safety glasses are required when filling con- refrigerating effect
tainers because of the ____ ____ of the liquid propane
16. a proper mixture of propane vapor, air and an ____ ____ ignition source
is needed for propane to burn
17. OSHA requires that employees are trained on fire ex- annually
tinguisher use immediately upon hiring & ____ there
after
18. all fire extinguishers require a ____ visual inspection monthly
19. most propane dispensers include a ____ ____ ____ that ASME storage tank
supplies propane to the dispensing equipment
20. when filling a cylinder by ____ using a fixed maximum volume
liquid level gauge, the process relies on the ____ to operator
determine when the maximum permitted filling for a
cylinder is reached
21. ____ ____ stations is used to provide an additional level remote shutdown
of emergency shutdown capability
22. platform balance beam scales must bear ____ ____ certification decals
23. when an operator is not in attendance the dispenser shut down and secured
should be ______________________
Study online at https://quizlet.com/_62ivne
1. it is the ____ responsibility to understand the regula- operators
tions and operations of the dispensing equipment
2. a ____ ____ must be done on every cylinder before it can visual inspection
be filled to ensure that are safe for filling
3. always make sure cylinder is filled to its proper level to overfilling
avoid ____
4. it is also the operators responsibility to educate the customer
____
5. always transport & store a cylinder in a ____ ____ posi- secure upright
tion so it will not fall shift or roll
6. never store cylinders inside a ____ ____ hot vehicle
7. remind customer to always proceed directly to their destination
____ and immediately ____ the cylinder from their vehi- remove
cle
8. wearing ____ ____ helps reduce the chance of produc- cotton blend
ing a static spark
9. ____ is an information bulletin that alerts you to prop- MSDS
erties and health hazards of propane
10. ____ is added to propane to increase the likelihood that odorant
a leak will be detected
11. liquid propane will ____ when heat is added to it expand
12. in order to allow for liquid expansion propane cylin- 80
ders are only filled to ____ % of their capacity
, dispensing LP-gas safely in texas
Study online at https://quizlet.com/_62ivne
13. propane liquid released into the air will expand to ____ 270
times it's original volume
14. ____ and ____ ____ are 2 types of PPE required when gloves
filling containers because of the refrigerating effect of safety glasses
liquid propane
15. gloves & safety glasses are required when filling con- refrigerating effect
tainers because of the ____ ____ of the liquid propane
16. a proper mixture of propane vapor, air and an ____ ____ ignition source
is needed for propane to burn
17. OSHA requires that employees are trained on fire ex- annually
tinguisher use immediately upon hiring & ____ there
after
18. all fire extinguishers require a ____ visual inspection monthly
19. most propane dispensers include a ____ ____ ____ that ASME storage tank
supplies propane to the dispensing equipment
20. when filling a cylinder by ____ using a fixed maximum volume
liquid level gauge, the process relies on the ____ to operator
determine when the maximum permitted filling for a
cylinder is reached
21. ____ ____ stations is used to provide an additional level remote shutdown
of emergency shutdown capability
22. platform balance beam scales must bear ____ ____ certification decals
23. when an operator is not in attendance the dispenser shut down and secured
should be ______________________
