Gas Technician 3 Practice Exam Questions and Answers
Study online at https://quizlet.com/_hj1upw
1. Specific gravity of natural gas vapour 0
2. Correct lifting instruction The back should be
straight and knees bent, to
use your leg muscles.
3. Type of diagram identifying connections and func- Schematic diagram.
tions
4. Can small lines be supported from larger lines? No.
5. Action when CO poisoning incident is suspected Immediately shut off the
supply of gas to the ap-
pliance or work; prompt-
ly give oral notice of the
shutting off of the gas to
the distributor; promptly
give written notice to the
user, describing the con-
dition that constitutes the
immediate hazard, and di-
recting that the appliance
or work not be used until
the condition is corrected.
6. Type of pipe used in low pressure piping system Black iron pipe.
7. Indication of neat, well groomed appearance That your work will reflect
the same care and consid-
eration.
, Gas Technician 3 Practice Exam Questions and Answers
Study online at https://quizlet.com/_hj1upw
8. Responsibilities of a gas technician for immediate haz- Responsibilities are iden-
ard tified in the local act, reg-
ulations and bulletins.
9. When should a CGI never be operated or used? All of the above.
10. CGI operation restrictions when the flashback ar-
restors removed, to sam-
ple liquid fuel, for sam-
pling gas vapours not
identified as suitable by
the manufacturer
11. Area expressed in meters m (meters)
12. Indication of thin, equally spaced broken lines on a hidden lines
technical drawing
13. Good practice after solving a customer's problem to perform a follow-up to
ensure the customer is still
satisfied
14. Specific gravity of liquid propane 0
15. Local requirement for NVG refueling stations local zoning requirements,
the building code, local
fire regulations
16. Non-verbal technique to calm upset customers both A and C (a calm sin-
cere concern and inter-
est in facial expressions, a
non-threatening posture)
17.
, Gas Technician 3 Practice Exam Questions and Answers
Study online at https://quizlet.com/_hj1upw
Best wording when responding to a customer's com- I can understand why you
plaint feel that way
18. Type of pipe threading die head that does not need to a quick opening die
be reversed
19. Type of analyzer both A and C (the tube
type, the liquid type)
20. Code for propane storage and handling CSA B149.2
21. Best alternative communication for heavy accented ask the customer to write
English their request
22. Best policy for arguing with customers always avoid conflict and
arguments with cus-
tomers
23. Minimum recommended distance for new fastener 3 inches
from a failed fastener
24. Definition of Due Diligence actions that are reason-
able in the circumstances
and would be conducted
by any reasonable person
25. Pipe size for pipe B NPS ½
26. American National Standard Institute An organization that pub-
lishes tables of symbols
found on piping draw-
ings.
27. Canadian Standards Association
Study online at https://quizlet.com/_hj1upw
1. Specific gravity of natural gas vapour 0
2. Correct lifting instruction The back should be
straight and knees bent, to
use your leg muscles.
3. Type of diagram identifying connections and func- Schematic diagram.
tions
4. Can small lines be supported from larger lines? No.
5. Action when CO poisoning incident is suspected Immediately shut off the
supply of gas to the ap-
pliance or work; prompt-
ly give oral notice of the
shutting off of the gas to
the distributor; promptly
give written notice to the
user, describing the con-
dition that constitutes the
immediate hazard, and di-
recting that the appliance
or work not be used until
the condition is corrected.
6. Type of pipe used in low pressure piping system Black iron pipe.
7. Indication of neat, well groomed appearance That your work will reflect
the same care and consid-
eration.
, Gas Technician 3 Practice Exam Questions and Answers
Study online at https://quizlet.com/_hj1upw
8. Responsibilities of a gas technician for immediate haz- Responsibilities are iden-
ard tified in the local act, reg-
ulations and bulletins.
9. When should a CGI never be operated or used? All of the above.
10. CGI operation restrictions when the flashback ar-
restors removed, to sam-
ple liquid fuel, for sam-
pling gas vapours not
identified as suitable by
the manufacturer
11. Area expressed in meters m (meters)
12. Indication of thin, equally spaced broken lines on a hidden lines
technical drawing
13. Good practice after solving a customer's problem to perform a follow-up to
ensure the customer is still
satisfied
14. Specific gravity of liquid propane 0
15. Local requirement for NVG refueling stations local zoning requirements,
the building code, local
fire regulations
16. Non-verbal technique to calm upset customers both A and C (a calm sin-
cere concern and inter-
est in facial expressions, a
non-threatening posture)
17.
, Gas Technician 3 Practice Exam Questions and Answers
Study online at https://quizlet.com/_hj1upw
Best wording when responding to a customer's com- I can understand why you
plaint feel that way
18. Type of pipe threading die head that does not need to a quick opening die
be reversed
19. Type of analyzer both A and C (the tube
type, the liquid type)
20. Code for propane storage and handling CSA B149.2
21. Best alternative communication for heavy accented ask the customer to write
English their request
22. Best policy for arguing with customers always avoid conflict and
arguments with cus-
tomers
23. Minimum recommended distance for new fastener 3 inches
from a failed fastener
24. Definition of Due Diligence actions that are reason-
able in the circumstances
and would be conducted
by any reasonable person
25. Pipe size for pipe B NPS ½
26. American National Standard Institute An organization that pub-
lishes tables of symbols
found on piping draw-
ings.
27. Canadian Standards Association
