Georgia General Contractor Exam
Practice Questions And Correct Answers
(Verified Answers) Plus Rationale 2027
Q&A| Instant Download Pdf.
1. Under Georgia’s commercial general contractor licensing framework,
what is the fundamental scope of an Unlimited Commercial General
Contractor license?
A) It permits only residential construction below a specified contract value
B) It permits only one specialty trade such as plumbing or electrical work
C) It authorizes commercial general contracting without the Limited Tier’s
project-value restriction, subject to the applicable licensing laws, financial
requirements, and scope limitations established by law
D) It authorizes unlicensed work whenever a subcontractor is separately
licensed
The Unlimited Commercial General Contractor classification is intended for
broad commercial general contracting, while applicable statutory,
regulatory, financial, and trade-specific requirements continue to govern
the contractor’s activities.
2. Which body administers Georgia’s licensing requirements for
commercial general contractors?
A) Georgia Department of Transportation
B) Georgia Department of Revenue
,C) State Licensing Board for Residential and Commercial General
Contractors
D) Georgia Environmental Protection Division
Georgia’s State Licensing Board for Residential and Commercial General
Contractors administers the licensing framework governing residential and
commercial general contractors.
3. What is a major distinction between Georgia’s Unlimited Commercial
General Contractor classification and the Limited Tier classification?
A) Unlimited contractors may work without permits
B) The Limited Tier classification is subject to a statutory contract-value
limitation, while the Unlimited classification does not have that Limited
Tier project-value restriction
C) Unlimited contractors are prohibited from commercial construction
D) Limited Tier contractors are not required to follow building codes
Georgia rules establish a Limited Tier license with a maximum contract
amount of $1,000,000, while the Unlimited classification is not subject to
that particular Limited Tier contract-value limitation.
4. What type of experience is particularly relevant to an applicant
seeking a Georgia Commercial General Contractor license?
A) Only residential handyman experience
B) Only interior decorating experience
C) Commercial construction experience appropriate to the licensing
requirements
D) Only property-management experience
Georgia’s commercial general contractor application materials specifically
indicate that commercial construction experience is required for this
license type.
5. What is the principal purpose of the Georgia commercial general
contractor examination?
,A) Test only arithmetic skills
B) Determine whether the applicant can practically apply knowledge of
commercial general contracting, plans and specifications, codes,
estimating, construction, ethics, contracting, and related legal
responsibilities
C) Determine the applicant’s credit score
D) Test only knowledge of architectural history
The Georgia rules describe the examination as evaluating practical
commercial general contracting knowledge, plan reading, codes,
estimating, construction, ethics, contracting, and the contractor’s legal
responsibilities.
6. When reviewing commercial construction drawings before submitting
a bid, what should a general contractor primarily seek to identify?
A) Only the architectural color palette
B) Only the owner's preferred subcontractors
C) Scope requirements, dimensions, materials, details, structural
requirements, specifications, coordination issues, and potential conflicts
affecting cost or constructability
D) Only the location of the project sign
A thorough prebid review helps the contractor understand the complete
scope and identify conflicts or omissions before establishing a binding price
and schedule.
7. If the architectural drawings conflict with structural drawings
concerning a load-bearing wall, what should the contractor generally
do?
A) Remove the wall because architectural drawings always control
B) Follow whichever option is cheaper
C) Request clarification from the appropriate design professional and
document the resolution before performing the affected work
D) Allow the laborer to decide which drawing controls
, Structural conflicts should be resolved through the proper design and
contract-administration process rather than through unauthorized field
interpretation.
8. What is the primary purpose of project specifications?
A) Replace all drawings
B) Establish detailed requirements for materials, workmanship, products,
procedures, quality, testing, and other aspects of the construction work
C) Establish property taxes
D) Determine employee wages
Specifications supplement drawings by defining detailed requirements
governing materials, workmanship, procedures, and performance.
9. What is the principal purpose of a construction estimate?
A) Establish the contractor’s license classification
B) Determine the building’s assessed tax value
C) Forecast labor, material, equipment, subcontract, overhead, and other
costs required to complete the project
D) Replace the construction schedule
Estimating converts the project's scope into expected costs and provides
the basis for developing a financially appropriate bid or proposal.
10. A contractor estimates direct project costs at $780,000 and
project-specific overhead at $70,000. If the contractor adds $150,000
for desired profit and risk allowance, what is the resulting proposed
price before taxes or other adjustments?
A) $850,000
B) $900,000
C) $1,000,000
D) $1,070,000
Practice Questions And Correct Answers
(Verified Answers) Plus Rationale 2027
Q&A| Instant Download Pdf.
1. Under Georgia’s commercial general contractor licensing framework,
what is the fundamental scope of an Unlimited Commercial General
Contractor license?
A) It permits only residential construction below a specified contract value
B) It permits only one specialty trade such as plumbing or electrical work
C) It authorizes commercial general contracting without the Limited Tier’s
project-value restriction, subject to the applicable licensing laws, financial
requirements, and scope limitations established by law
D) It authorizes unlicensed work whenever a subcontractor is separately
licensed
The Unlimited Commercial General Contractor classification is intended for
broad commercial general contracting, while applicable statutory,
regulatory, financial, and trade-specific requirements continue to govern
the contractor’s activities.
2. Which body administers Georgia’s licensing requirements for
commercial general contractors?
A) Georgia Department of Transportation
B) Georgia Department of Revenue
,C) State Licensing Board for Residential and Commercial General
Contractors
D) Georgia Environmental Protection Division
Georgia’s State Licensing Board for Residential and Commercial General
Contractors administers the licensing framework governing residential and
commercial general contractors.
3. What is a major distinction between Georgia’s Unlimited Commercial
General Contractor classification and the Limited Tier classification?
A) Unlimited contractors may work without permits
B) The Limited Tier classification is subject to a statutory contract-value
limitation, while the Unlimited classification does not have that Limited
Tier project-value restriction
C) Unlimited contractors are prohibited from commercial construction
D) Limited Tier contractors are not required to follow building codes
Georgia rules establish a Limited Tier license with a maximum contract
amount of $1,000,000, while the Unlimited classification is not subject to
that particular Limited Tier contract-value limitation.
4. What type of experience is particularly relevant to an applicant
seeking a Georgia Commercial General Contractor license?
A) Only residential handyman experience
B) Only interior decorating experience
C) Commercial construction experience appropriate to the licensing
requirements
D) Only property-management experience
Georgia’s commercial general contractor application materials specifically
indicate that commercial construction experience is required for this
license type.
5. What is the principal purpose of the Georgia commercial general
contractor examination?
,A) Test only arithmetic skills
B) Determine whether the applicant can practically apply knowledge of
commercial general contracting, plans and specifications, codes,
estimating, construction, ethics, contracting, and related legal
responsibilities
C) Determine the applicant’s credit score
D) Test only knowledge of architectural history
The Georgia rules describe the examination as evaluating practical
commercial general contracting knowledge, plan reading, codes,
estimating, construction, ethics, contracting, and the contractor’s legal
responsibilities.
6. When reviewing commercial construction drawings before submitting
a bid, what should a general contractor primarily seek to identify?
A) Only the architectural color palette
B) Only the owner's preferred subcontractors
C) Scope requirements, dimensions, materials, details, structural
requirements, specifications, coordination issues, and potential conflicts
affecting cost or constructability
D) Only the location of the project sign
A thorough prebid review helps the contractor understand the complete
scope and identify conflicts or omissions before establishing a binding price
and schedule.
7. If the architectural drawings conflict with structural drawings
concerning a load-bearing wall, what should the contractor generally
do?
A) Remove the wall because architectural drawings always control
B) Follow whichever option is cheaper
C) Request clarification from the appropriate design professional and
document the resolution before performing the affected work
D) Allow the laborer to decide which drawing controls
, Structural conflicts should be resolved through the proper design and
contract-administration process rather than through unauthorized field
interpretation.
8. What is the primary purpose of project specifications?
A) Replace all drawings
B) Establish detailed requirements for materials, workmanship, products,
procedures, quality, testing, and other aspects of the construction work
C) Establish property taxes
D) Determine employee wages
Specifications supplement drawings by defining detailed requirements
governing materials, workmanship, procedures, and performance.
9. What is the principal purpose of a construction estimate?
A) Establish the contractor’s license classification
B) Determine the building’s assessed tax value
C) Forecast labor, material, equipment, subcontract, overhead, and other
costs required to complete the project
D) Replace the construction schedule
Estimating converts the project's scope into expected costs and provides
the basis for developing a financially appropriate bid or proposal.
10. A contractor estimates direct project costs at $780,000 and
project-specific overhead at $70,000. If the contractor adds $150,000
for desired profit and risk allowance, what is the resulting proposed
price before taxes or other adjustments?
A) $850,000
B) $900,000
C) $1,000,000
D) $1,070,000
