Georgia Alarm Systems Contractor
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant Download
Pdf.
1.Under Georgia’s statewide low-voltage contractor licensing structure,
which license class is specifically restricted to alarm and general-system low-
voltage contracting?
A. Class LV-T
B. Class LV-A
C. Class LV-G
D. Class LV-U
Rationale: Georgia Class LV-A is the low-voltage contractor classification
restricted to alarm and general-system low-voltage contracting. Class LV-T
covers telecommunications and general systems, LV-G covers general
systems, and LV-U is unrestricted.
2. What minimum amount of qualifying low-voltage wiring experience is
generally required for an applicant to qualify to take the Georgia
statewide low-voltage contractor examination?
A. Six months
B. One year
,C. Two years
D. Four years
Rationale: Georgia’s licensing rule requires at least one year of experience
in low-voltage wiring in the license category for which the applicant is
seeking examination eligibility.
3. An applicant has completed electronics courses at a technical trade
school. For examination qualification, how much of this educational
training may be credited as equivalent experience under the Georgia
rule?
A. No educational credit is permitted
B. Up to three months
C. Up to six months
D. Up to twelve months
Rationale: Qualifying electronics courses through an engineering
technology school or technical trade school may be credited as experience
equivalent to the instructional time, but the credit is limited to a maximum
of six months.
4. What examination score is specified by Georgia’s statewide low-
voltage contractor rule as the required passing score for the
appropriate examination?
A. 60 percent
B. 65 percent
C. 70 percent
D. 75 percent
Rationale: The Georgia rule specifies a score of 70 on the appropriate
examination as one of the requirements for obtaining a statewide low-
voltage contractor license.
, 5. Which organization administers the Georgia Low Voltage Alarm
Systems examination after an applicant receives Board approval to sit
for the examination?
A. ICC
B. NFPA
C. PSI
D. OSHA
Rationale: After the Georgia Board approves an applicant to sit for the
examination, the applicant receives an Exam Approval Letter with
instructions for registering through PSI, the testing vendor.
6. An applicant who has never held a Georgia Low Voltage Alarm license
wants to become licensed by examination. What must occur before
the applicant can register for the examination with the testing
vendor?
A. The applicant must first obtain a city electrical permit
B. The applicant must register a low-voltage company
C. The Georgia Board must approve the applicant to sit for the
examination
D. The applicant must obtain a fire marshal certificate
Rationale: Georgia requires Board approval before a first-time Low
Voltage Alarm applicant may sit for the examination. The Board reviews
the application and supporting documentation before issuing examination
approval.
7. Which of the following is specifically identified by the Georgia
Secretary of State as a document required for a first-time Low Voltage
Alarm application?
A. A commercial building permit
B. A background check obtained through a local law enforcement agency
C. A manufacturer's authorization letter
D. A fire department inspection report
, Rationale: The Georgia Low Voltage Alarm application checklist includes a
background check obtained through the applicant’s local law enforcement
agency.
8. In addition to the application, background check, and other required
documentation, how many reference forms are generally required for
a Georgia low-voltage contractor application?
A. One
B. Two
C. Three
D. Five
Rationale: The Georgia Secretary of State identifies three completed
reference forms as part of the low-voltage contractor application
requirements, with at least one reference required to be a licensed low-
voltage contractor.
9. Which person is specifically required among the references for a
Georgia low-voltage contractor applicant?
A. A licensed general contractor
B. A county building official
C. At least one licensed low-voltage contractor
D. A certified electrician from another state
Rationale: Georgia requires at least one of the applicant’s three references
to be a licensed low-voltage contractor.
10. Which statement correctly describes Georgia’s current position
regarding low-voltage contractor reciprocity?
A. Reciprocity exists with every neighboring state
B. Reciprocity is automatic for any nationally certified contractor
C. Georgia currently has no active reciprocity agreements with other states
D. Reciprocity applies only to alarm contractors
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant Download
Pdf.
1.Under Georgia’s statewide low-voltage contractor licensing structure,
which license class is specifically restricted to alarm and general-system low-
voltage contracting?
A. Class LV-T
B. Class LV-A
C. Class LV-G
D. Class LV-U
Rationale: Georgia Class LV-A is the low-voltage contractor classification
restricted to alarm and general-system low-voltage contracting. Class LV-T
covers telecommunications and general systems, LV-G covers general
systems, and LV-U is unrestricted.
2. What minimum amount of qualifying low-voltage wiring experience is
generally required for an applicant to qualify to take the Georgia
statewide low-voltage contractor examination?
A. Six months
B. One year
,C. Two years
D. Four years
Rationale: Georgia’s licensing rule requires at least one year of experience
in low-voltage wiring in the license category for which the applicant is
seeking examination eligibility.
3. An applicant has completed electronics courses at a technical trade
school. For examination qualification, how much of this educational
training may be credited as equivalent experience under the Georgia
rule?
A. No educational credit is permitted
B. Up to three months
C. Up to six months
D. Up to twelve months
Rationale: Qualifying electronics courses through an engineering
technology school or technical trade school may be credited as experience
equivalent to the instructional time, but the credit is limited to a maximum
of six months.
4. What examination score is specified by Georgia’s statewide low-
voltage contractor rule as the required passing score for the
appropriate examination?
A. 60 percent
B. 65 percent
C. 70 percent
D. 75 percent
Rationale: The Georgia rule specifies a score of 70 on the appropriate
examination as one of the requirements for obtaining a statewide low-
voltage contractor license.
, 5. Which organization administers the Georgia Low Voltage Alarm
Systems examination after an applicant receives Board approval to sit
for the examination?
A. ICC
B. NFPA
C. PSI
D. OSHA
Rationale: After the Georgia Board approves an applicant to sit for the
examination, the applicant receives an Exam Approval Letter with
instructions for registering through PSI, the testing vendor.
6. An applicant who has never held a Georgia Low Voltage Alarm license
wants to become licensed by examination. What must occur before
the applicant can register for the examination with the testing
vendor?
A. The applicant must first obtain a city electrical permit
B. The applicant must register a low-voltage company
C. The Georgia Board must approve the applicant to sit for the
examination
D. The applicant must obtain a fire marshal certificate
Rationale: Georgia requires Board approval before a first-time Low
Voltage Alarm applicant may sit for the examination. The Board reviews
the application and supporting documentation before issuing examination
approval.
7. Which of the following is specifically identified by the Georgia
Secretary of State as a document required for a first-time Low Voltage
Alarm application?
A. A commercial building permit
B. A background check obtained through a local law enforcement agency
C. A manufacturer's authorization letter
D. A fire department inspection report
, Rationale: The Georgia Low Voltage Alarm application checklist includes a
background check obtained through the applicant’s local law enforcement
agency.
8. In addition to the application, background check, and other required
documentation, how many reference forms are generally required for
a Georgia low-voltage contractor application?
A. One
B. Two
C. Three
D. Five
Rationale: The Georgia Secretary of State identifies three completed
reference forms as part of the low-voltage contractor application
requirements, with at least one reference required to be a licensed low-
voltage contractor.
9. Which person is specifically required among the references for a
Georgia low-voltage contractor applicant?
A. A licensed general contractor
B. A county building official
C. At least one licensed low-voltage contractor
D. A certified electrician from another state
Rationale: Georgia requires at least one of the applicant’s three references
to be a licensed low-voltage contractor.
10. Which statement correctly describes Georgia’s current position
regarding low-voltage contractor reciprocity?
A. Reciprocity exists with every neighboring state
B. Reciprocity is automatic for any nationally certified contractor
C. Georgia currently has no active reciprocity agreements with other states
D. Reciprocity applies only to alarm contractors
