NCIDQ IDPX PRACTICE EXAMINATION
2026 QUESTIONS WITH ANSWERS
GRADED A+
◍ When the interior designer does not want furniture to be delivered to the
designer's office, the designer should complete a.
Answer: drop ship order
◍ An interior designer could determine what products an independent
representative handled by consulting.
Answer: a line chart
◍ Of the options listed below, what tool is the most commonly used in cost
estimating for FF&E?.
Answer: Furniture schedule
◍ When specifying a specialty flooring material, the interior designer can
obtain unbiased information on the hazards of a cleaning agent, required for
maintenance, from the.
Answer: material safety data sheet
◍ After defining the exact scope of work and selecting individual floor finish
types for each area of your project, you must provide your client with an
updated working budget number.
Which method of estimating would be used at this time?.
Answer: Parameter Method
◍ The commercial design firm is acting as purchasing agent for a major
renovation project, which paperwork is prepared first in the procurement
process?.
Answer: proposal
, ◍ Typically what are the first items of FF&E that an interior designer should
research?.
Answer: furniture or accessory items
◍ During the programming phase of your large, international consulting firms
new office space, the client has identified that they have both a "bring your
own device to work" policy as well as a number of "non-assigned" workers
who tend to congregate in their combination lounge/lunchroom to work.
They would like to have ample power and data connections above the tables
and counters throughout the space that will address the maximum number of
device type connections, including standard power, standard USB, and more
universally accepted USB-C wall outlets.
Which of the following outlet combinations would you suggest the electrical
engineer specify in these areas?.
Answer: (2) grounded outlets and (1) USB-C mini-port and (1) standard
USB port
◍ Which complete lock assembly is installed in a cut-out door recess, making
it one of the most secure locking units?.
Answer: mortise
◍ In a fully sprinklered building, how many sprinklers are required in a room
that measures 35 ft x 45 ft (1067 cm x 1372 cm)?.
Answer: 9
◍ In a high rise building, a designer often has to work around fixed pipes and
pipe chases that cannot be moved. One of those pipe systems is often a
standpipe.
Which of the following is the best description of a standpipe system?.
Answer: Piping and valves for use as a fire protection system
◍ This type of lamp produces light by heating a material (usually metal) to a
temperature at which it glows..
Answer: incandescent
◍ All of the following are true about pivot door hinges EXCEPT?.
2026 QUESTIONS WITH ANSWERS
GRADED A+
◍ When the interior designer does not want furniture to be delivered to the
designer's office, the designer should complete a.
Answer: drop ship order
◍ An interior designer could determine what products an independent
representative handled by consulting.
Answer: a line chart
◍ Of the options listed below, what tool is the most commonly used in cost
estimating for FF&E?.
Answer: Furniture schedule
◍ When specifying a specialty flooring material, the interior designer can
obtain unbiased information on the hazards of a cleaning agent, required for
maintenance, from the.
Answer: material safety data sheet
◍ After defining the exact scope of work and selecting individual floor finish
types for each area of your project, you must provide your client with an
updated working budget number.
Which method of estimating would be used at this time?.
Answer: Parameter Method
◍ The commercial design firm is acting as purchasing agent for a major
renovation project, which paperwork is prepared first in the procurement
process?.
Answer: proposal
, ◍ Typically what are the first items of FF&E that an interior designer should
research?.
Answer: furniture or accessory items
◍ During the programming phase of your large, international consulting firms
new office space, the client has identified that they have both a "bring your
own device to work" policy as well as a number of "non-assigned" workers
who tend to congregate in their combination lounge/lunchroom to work.
They would like to have ample power and data connections above the tables
and counters throughout the space that will address the maximum number of
device type connections, including standard power, standard USB, and more
universally accepted USB-C wall outlets.
Which of the following outlet combinations would you suggest the electrical
engineer specify in these areas?.
Answer: (2) grounded outlets and (1) USB-C mini-port and (1) standard
USB port
◍ Which complete lock assembly is installed in a cut-out door recess, making
it one of the most secure locking units?.
Answer: mortise
◍ In a fully sprinklered building, how many sprinklers are required in a room
that measures 35 ft x 45 ft (1067 cm x 1372 cm)?.
Answer: 9
◍ In a high rise building, a designer often has to work around fixed pipes and
pipe chases that cannot be moved. One of those pipe systems is often a
standpipe.
Which of the following is the best description of a standpipe system?.
Answer: Piping and valves for use as a fire protection system
◍ This type of lamp produces light by heating a material (usually metal) to a
temperature at which it glows..
Answer: incandescent
◍ All of the following are true about pivot door hinges EXCEPT?.
