NWSA TT1 CORE REVIEWS ANSWERS AND
QUESTIONS SET A+
✔✔Self-retracting life line - ✔✔A device that automatically retracts and extends a
lifeline, allowing for freedom of movement while ensuring safety.
✔✔Positioning device - ✔✔A tool or equipment that secures a worker in a specific
position while working at heights.
✔✔Symptoms of overexposure to RF - ✔✔Poor mental capacity, Nausea, Headaches,
All of the above.
✔✔Wire rope size for hoisting personnel - ✔✔1/2, 3/8, 7/16.
✔✔When to wear safety glasses - ✔✔At all times, When grinding steel.
✔✔Signal for lowering the boom - ✔✔Indicates the action of lowering the boom of a
crane or similar equipment.
✔✔Minimum force for non-engineered anchor - ✔✔Must be able to withstand 2000,
3000, 4000, 5,000 lbs.
✔✔Who tells you when to stop tagging a load - ✔✔OSHA and the Capstan operator,
The project manager and the capstan operator, The general contractor and the
construction crew, The capstan operator and the tower crew.
✔✔What to do if an issue occurs with a load lift - ✔✔Stop the operation.
✔✔What to seal a cad weld with - ✔✔Rubber, Plastic, Duct Seal.
✔✔Designer of fall arrest anchorage system - ✔✔Qualified Person according to ANSI
z359.
✔✔Inspection frequency for a capstan hoist - ✔✔Monthly, Annually, Weekly, Daily.
, ✔✔Function of a ground fault circuit interrupter (GFCI) - ✔✔Prevents electrocution,
Senses a short circuit, Shuts off the flow of Electricity, All of the above.
✔✔Force withstand requirement for fall protection latch - ✔✔Must withstand 3,600 lbs.
✔✔Anchorage requirement for three guys tied to a tower leg - ✔✔Must meet 5000lbs.
✔✔Diameter of a shackle - ✔✔Called Clevis.
✔✔Procedure for installing a bolt in members - ✔✔Down and out, Down and in, Up and
in, Up and Out.
✔✔Methods of measuring guy wire - ✔✔Direct and Slope, Direct and Indirect.
✔✔Minimum breaking strength for a vertical life line - ✔✔Must be 2000, 3000, 4000,
5000 lbs.
✔✔FS in rigging applications - ✔✔Stands for Factor of Safety.
✔✔Best synthetic rope material for overhead lifting - ✔✔Polyester.
✔✔Working parts of a hoist - ✔✔Hydraulic motor - Hydraulic control levers - Hydraulic
pump - All of the above.
✔✔TIA 1019 Standards - ✔✔Standards for installation, alteration and maintenance of
antenna supporting structures and antennas.
✔✔Group allowed highest level of exposure - ✔✔Public.
✔✔Max lifting without mechanical advantage for a lb Capstan hoist with 2:1 - ✔✔1000,
2000, 1500, 500 lbs.
✔✔Fiber optic testing equipment - ✔✔PIM, Sweep, OTDR
✔✔Force on the harness - ✔✔900, 5000, 1800
✔✔Overhaul ball function - ✔✔A place to hook the load, Provides weight allowing the
load line to return to the ground
✔✔Safe practice near active antenna - ✔✔Stay 6 feet or more away
✔✔Fiber connection to the tower - ✔✔Steel grommets, and 1 5/8 snap ins, Cable ties
and fiber sheathing, Rubber grommets and 5/8" snap ins
QUESTIONS SET A+
✔✔Self-retracting life line - ✔✔A device that automatically retracts and extends a
lifeline, allowing for freedom of movement while ensuring safety.
✔✔Positioning device - ✔✔A tool or equipment that secures a worker in a specific
position while working at heights.
✔✔Symptoms of overexposure to RF - ✔✔Poor mental capacity, Nausea, Headaches,
All of the above.
✔✔Wire rope size for hoisting personnel - ✔✔1/2, 3/8, 7/16.
✔✔When to wear safety glasses - ✔✔At all times, When grinding steel.
✔✔Signal for lowering the boom - ✔✔Indicates the action of lowering the boom of a
crane or similar equipment.
✔✔Minimum force for non-engineered anchor - ✔✔Must be able to withstand 2000,
3000, 4000, 5,000 lbs.
✔✔Who tells you when to stop tagging a load - ✔✔OSHA and the Capstan operator,
The project manager and the capstan operator, The general contractor and the
construction crew, The capstan operator and the tower crew.
✔✔What to do if an issue occurs with a load lift - ✔✔Stop the operation.
✔✔What to seal a cad weld with - ✔✔Rubber, Plastic, Duct Seal.
✔✔Designer of fall arrest anchorage system - ✔✔Qualified Person according to ANSI
z359.
✔✔Inspection frequency for a capstan hoist - ✔✔Monthly, Annually, Weekly, Daily.
, ✔✔Function of a ground fault circuit interrupter (GFCI) - ✔✔Prevents electrocution,
Senses a short circuit, Shuts off the flow of Electricity, All of the above.
✔✔Force withstand requirement for fall protection latch - ✔✔Must withstand 3,600 lbs.
✔✔Anchorage requirement for three guys tied to a tower leg - ✔✔Must meet 5000lbs.
✔✔Diameter of a shackle - ✔✔Called Clevis.
✔✔Procedure for installing a bolt in members - ✔✔Down and out, Down and in, Up and
in, Up and Out.
✔✔Methods of measuring guy wire - ✔✔Direct and Slope, Direct and Indirect.
✔✔Minimum breaking strength for a vertical life line - ✔✔Must be 2000, 3000, 4000,
5000 lbs.
✔✔FS in rigging applications - ✔✔Stands for Factor of Safety.
✔✔Best synthetic rope material for overhead lifting - ✔✔Polyester.
✔✔Working parts of a hoist - ✔✔Hydraulic motor - Hydraulic control levers - Hydraulic
pump - All of the above.
✔✔TIA 1019 Standards - ✔✔Standards for installation, alteration and maintenance of
antenna supporting structures and antennas.
✔✔Group allowed highest level of exposure - ✔✔Public.
✔✔Max lifting without mechanical advantage for a lb Capstan hoist with 2:1 - ✔✔1000,
2000, 1500, 500 lbs.
✔✔Fiber optic testing equipment - ✔✔PIM, Sweep, OTDR
✔✔Force on the harness - ✔✔900, 5000, 1800
✔✔Overhaul ball function - ✔✔A place to hook the load, Provides weight allowing the
load line to return to the ground
✔✔Safe practice near active antenna - ✔✔Stay 6 feet or more away
✔✔Fiber connection to the tower - ✔✔Steel grommets, and 1 5/8 snap ins, Cable ties
and fiber sheathing, Rubber grommets and 5/8" snap ins
