GEORGIA CLASS F DRIVERS LICENSE 2026/2027 | ACTUAL EXAM SET
QUESTIONS AND VERIFIED ANSWERS (CORRECT SOLUTIONS) | GET IT
100% ACCURATE!!
Question 1
What is the most important reason for performing a pre-trip vehicle
inspection?
A) To comply with company policy
B) To ensure safety for yourself and other road users
C) To avoid getting a ticket
D) To save money on fuel
Correct Answer: B
Rationale: The primary reason for a pre-trip inspection is safety.
Identifying potential mechanical issues before driving prevents
accidents and protects everyone on the road.
Question 2
When driving a heavy vehicle at 55 mph, approximately how many
seconds does it take to come to a complete stop?
A) 2 seconds
B) 4 seconds
C) 6 seconds
D) 8 seconds
Correct Answer: C
Rationale: Stopping a heavy vehicle requires significantly more time
than a passenger car. At 55 mph, considering perception, reaction, and
braking distance, it takes approximately 6 seconds to stop safely.
,Question 3
What is the minimum tread depth required for the front steering tires
of a heavy vehicle?
A) 1/32 inch
B) 2/32 inch
C) 3/32 inch
D) 4/32 inch
Correct Answer: D
Rationale: Safety regulations require deeper tread on the steering tires
to ensure adequate traction and prevent hydroplaning. The minimum
depth is 4/32 inch.
Question 4
What is the minimum tread depth required for all tires except the front
steering tires?
A) 1/32 inch
B) 2/32 inch
C) 3/32 inch
D) 4/32 inch
Correct Answer: B
Rationale: While front tires require 4/32 inch, the rear and trailer tires
are legally required to have at least 2/32 inch of tread depth.
Question 5
What is the maximum allowable play in a 20-inch steering wheel?
A) 1 inch
B) 2 inches
C) 3 inches
D) 4 inches
Correct Answer: B
,Rationale: Excessive play makes it difficult to steer accurately. The limit
is 10 degrees of play, which translates to approximately 2 inches on a
standard 20-inch steering wheel.
Question 6
When performing the initial test for air brake leaks, what is the correct
procedure?
A) Pump the brakes until the air pressure reaches 150 PSI
B) Hold the brake down for 5 minutes while the engine is running
C) Pump the brakes 3 times and then hold the brake on the 4th
D) Release the parking brake and watch the gauge for 20 seconds
Correct Answer: C
Rationale: To check for leaks and ensure the system holds pressure
under load, you should pump the pedal three times to reduce pressure
and then hold it on the fourth stroke to monitor the gauge for
movement.
Question 7
Which of the following are the primary factors that determine a
person's Blood Alcohol Concentration (BAC)?
A) Type of alcohol and time spent drinking
B) Amount of alcohol and the person's weight
C) Age and height
D) Fitness level and gender
Correct Answer: B
Rationale: While other factors might change how a person feels, BAC is
scientifically calculated based primarily on the amount of alcohol
ingested and the volume of blood in the body, which is determined by
weight.
, Question 8
What is the correct formula for calculating the total stopping distance of
a heavy vehicle?
A) Speed x Weight + Braking distance
B) Reaction time + Braking distance
C) Perception time + Reaction time + Braking distance
D) Perception time + Reaction distance / 2
Correct Answer: C
Rationale: Total stopping distance involves the time it takes to see the
hazard (perception), the time to physically move your foot to the pedal
(reaction), and the distance the vehicle travels once the brakes are
applied (braking).
Question 9
When inspecting the engine compartment, what is the maximum
allowable play in any engine belt?
A) 1/4 inch
B) 1/2 inch
C) 3/4 inch
D) 1 inch
Correct Answer: C
Rationale: Belts must be tight enough to drive the alternator, water
pump, and other components efficiently. If a belt has more than 3/4
inch of play, it should be adjusted or replaced.
Question 10
If your vehicle’s Anti-lock Braking System (ABS) fails while you are
driving, what should you do?
A) Stop immediately on the shoulder
B) Call for a tow truck from the middle of the road
QUESTIONS AND VERIFIED ANSWERS (CORRECT SOLUTIONS) | GET IT
100% ACCURATE!!
Question 1
What is the most important reason for performing a pre-trip vehicle
inspection?
A) To comply with company policy
B) To ensure safety for yourself and other road users
C) To avoid getting a ticket
D) To save money on fuel
Correct Answer: B
Rationale: The primary reason for a pre-trip inspection is safety.
Identifying potential mechanical issues before driving prevents
accidents and protects everyone on the road.
Question 2
When driving a heavy vehicle at 55 mph, approximately how many
seconds does it take to come to a complete stop?
A) 2 seconds
B) 4 seconds
C) 6 seconds
D) 8 seconds
Correct Answer: C
Rationale: Stopping a heavy vehicle requires significantly more time
than a passenger car. At 55 mph, considering perception, reaction, and
braking distance, it takes approximately 6 seconds to stop safely.
,Question 3
What is the minimum tread depth required for the front steering tires
of a heavy vehicle?
A) 1/32 inch
B) 2/32 inch
C) 3/32 inch
D) 4/32 inch
Correct Answer: D
Rationale: Safety regulations require deeper tread on the steering tires
to ensure adequate traction and prevent hydroplaning. The minimum
depth is 4/32 inch.
Question 4
What is the minimum tread depth required for all tires except the front
steering tires?
A) 1/32 inch
B) 2/32 inch
C) 3/32 inch
D) 4/32 inch
Correct Answer: B
Rationale: While front tires require 4/32 inch, the rear and trailer tires
are legally required to have at least 2/32 inch of tread depth.
Question 5
What is the maximum allowable play in a 20-inch steering wheel?
A) 1 inch
B) 2 inches
C) 3 inches
D) 4 inches
Correct Answer: B
,Rationale: Excessive play makes it difficult to steer accurately. The limit
is 10 degrees of play, which translates to approximately 2 inches on a
standard 20-inch steering wheel.
Question 6
When performing the initial test for air brake leaks, what is the correct
procedure?
A) Pump the brakes until the air pressure reaches 150 PSI
B) Hold the brake down for 5 minutes while the engine is running
C) Pump the brakes 3 times and then hold the brake on the 4th
D) Release the parking brake and watch the gauge for 20 seconds
Correct Answer: C
Rationale: To check for leaks and ensure the system holds pressure
under load, you should pump the pedal three times to reduce pressure
and then hold it on the fourth stroke to monitor the gauge for
movement.
Question 7
Which of the following are the primary factors that determine a
person's Blood Alcohol Concentration (BAC)?
A) Type of alcohol and time spent drinking
B) Amount of alcohol and the person's weight
C) Age and height
D) Fitness level and gender
Correct Answer: B
Rationale: While other factors might change how a person feels, BAC is
scientifically calculated based primarily on the amount of alcohol
ingested and the volume of blood in the body, which is determined by
weight.
, Question 8
What is the correct formula for calculating the total stopping distance of
a heavy vehicle?
A) Speed x Weight + Braking distance
B) Reaction time + Braking distance
C) Perception time + Reaction time + Braking distance
D) Perception time + Reaction distance / 2
Correct Answer: C
Rationale: Total stopping distance involves the time it takes to see the
hazard (perception), the time to physically move your foot to the pedal
(reaction), and the distance the vehicle travels once the brakes are
applied (braking).
Question 9
When inspecting the engine compartment, what is the maximum
allowable play in any engine belt?
A) 1/4 inch
B) 1/2 inch
C) 3/4 inch
D) 1 inch
Correct Answer: C
Rationale: Belts must be tight enough to drive the alternator, water
pump, and other components efficiently. If a belt has more than 3/4
inch of play, it should be adjusted or replaced.
Question 10
If your vehicle’s Anti-lock Braking System (ABS) fails while you are
driving, what should you do?
A) Stop immediately on the shoulder
B) Call for a tow truck from the middle of the road
